|
|
|
06-21-2005, 02:05 PM
|
#1 |
|
Registered User
Join Date: May 2005
Location: Santa Cruz, California
Posts: 54
|
accelerator pedal
Can anyone post a picture of the accelerator assembly (rod and connection to pedal)? My new 68 truck came without one and I'm not sure exactly what parts to look for.
TIA Richard
__________________
Not all who wander are lost |
|
|
|
06-21-2005, 04:42 PM
|
#2 |
|
Account Suspended
Join Date: Oct 2004
Posts: 1,276
|
LMC sells the pedal. It sets over some small ball head studs on the floor and simply pushes on the rod hanging dow . When I purchased my truck and asked about the missing pedal, the PO said " I use my foot, it works perfect!" which it realy does, but the pedal sure looks better!
|
|
|
|
|
06-21-2005, 05:07 PM
|
#3 |
|
Registered User
Join Date: May 2005
Location: Santa Cruz, California
Posts: 54
|
You are so right. I thought that I wasn't going to be able to drive it, but does work fine. I couldn't find one in the LMC catalog, only the replacement pad, I will look harder when I get home.
Thanks Richard
__________________
Not all who wander are lost |
|
|
|
|
06-21-2005, 08:47 PM
|
#4 |
|
Registered User
Join Date: Feb 2004
Location: Penelope, Texas
Posts: 393
|
This is what I pulled off of my 70 model. If you need better photos I can take more.
|
|
|
|
|
06-21-2005, 08:52 PM
|
#5 |
|
Registered User
Join Date: Jun 2005
Location: Slatington, PA
Posts: 536
|
Is there a trick to getting the pedal to fit on the ball studs? I'vce meesed with it at several angles and I can't get it to fit. Don't mean toi steal your post, Richard.
Matt
__________________
67 C10 LWB Stepside- 250cid 6, 3speed |
|
|
|
|
06-22-2005, 05:07 PM
|
#6 |
|
Registered User
Join Date: May 2005
Location: Santa Cruz, California
Posts: 54
|
Don't worry matt, I' d most likely have asked that question anyway.
|
|
|
|
|
06-21-2005, 10:46 PM
|
#7 |
|
Designated A-hole!
Join Date: Mar 2003
Location: South Mississippi
Posts: 36,448
|
Mine never had a pedal, but I don't believe it connects to the rod, just kinda leans up against it.
__________________
"If it ain't broke, fix it 'til it is!" Being stupid ain't illegal.  We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck" |
|
|
|
|
06-21-2005, 11:02 PM
|
#8 |
|
Account Suspended
Join Date: Oct 2004
Posts: 1,276
|
I agree with krue, the pedal just leans against the rod. LMC sells the pad and that is it, that's what ya want and what ya need to complete the assembly here.. The pad= the pedal from LMC. It has the 2 spots in the bottom for the ball studs. I guess wd-40 might help the pedal slip onto the balls. I haven't tried mine yet since I am working on other major parts of the truck at this time.
|
|
|
|
|
06-23-2005, 11:05 AM
|
#9 |
|
More Cowbell....
Join Date: Mar 2004
Location: Puckett, MS
Posts: 3,569
|
The pedal snaps onto the ball studs. I just positioned mine over the balls and pressed it down with the heal of my foot...hard...and POP...it went on.
__________________
There once was a member from Puckett.....Who ( fill in the blank blank blank ) bucket |
|
|
|
|
06-23-2005, 07:14 PM
|
#10 |
|
Registered User
Join Date: Jun 2005
Location: Slatington, PA
Posts: 536
|
Cool, thanks Putter.
__________________
67 C10 LWB Stepside- 250cid 6, 3speed |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
