|
|
|
06-24-2005, 11:26 AM
|
#1 |
|
Registered User
Join Date: May 2005
Location: Texarkana, AR 71854
Posts: 397
|
Removing distributor
I tried replacing the push rod gaskets without taking out the distributor, It made the oil leak worse.
 anyway I can't get the gasket lined up without taking out the distributor is there any special that I need to know while taking it out. I have never pulled out a distibutor before.
__________________
2006 Titan SE Crew Cab Daily Driver 2005 Mazda Tribute (Wifes car) 1969 C10 SWB 350/3 Fleet "Max" 1969 Chevelle 2 door 350/3 |
|
|
|
06-24-2005, 11:55 AM
|
#2 |
|
Keep On Truckin'
Join Date: Mar 2003
Location: Buda, Texas
Posts: 1,354
|
What are push rod gaskets? That's a new one on me.
As far as removing the distributor goes, here's what I do: * Remove the coil wire * Pull #1 spark plug * Put a finger over the spark plug hole * Have someone keep bumping the ignition until you feel the compression push your finger (kinda' makes a farting noise) * Right at that point turn the engine over by hand until the timing mark on the harmonic balancer lines up with "0" on the timing marker. You now have #1 piston at top dead center * Pull the distributor cap * Make 3 marks with a felt tip pin; one on the distributor housing where the rotor is pointing (should be to #1 cylinder). Make a mark on the base of the distributor and the block (this allows you to put it back in accurately). As you pull the distributor straight up the rotor will turn. When the rotor stops turning make another mark on the distributor housing where the rotor is pointing (this allows you to position the rotor easily so it lines up with the oil pump. When you put it back in reverse lining up the marks and presto, the original timing is saved.
__________________
Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire..... |
|
|
|
|
06-24-2005, 12:02 PM
|
#3 |
|
YES_____NO
 
Join Date: Jul 1999
Location: Somewhere in the vicinity of betelgeuse
Posts: 7,351
|
Push rod gasket
__________________
People many not remember what you said or what you did, but they will remember the way you made them feel. - unknown Cause, remember: no matter where you go... there you are. - Buckaroo Banzai 1984 Help support the board |
|
|
|
|
06-24-2005, 12:03 PM
|
#4 |
|
Keep On Truckin'
Join Date: Mar 2003
Location: Buda, Texas
Posts: 1,354
|
Looks like an extra small.....
__________________
Just Passin' Thru Some projects are like herding cats; others are like putting out fires; this one was like herding cats on fire..... |
|
|
|
|
06-24-2005, 12:12 PM
|
#5 |
|
'68 C-20 396 CST CC
Join Date: Mar 2005
Location: Spokane, WA
Posts: 454
|
__________________
68 C-20 396/TH400 CST Custom Camper NOW W/DISC BRAKES  01 Jetta Turbo Daily Driver  84 Yamaha Virago 700 - Alaska to Florida Via Maine & Mexico 
|
|
|
|
|
06-24-2005, 03:22 PM
|
#6 | |
|
Registered User
Join Date: Apr 2003
Location: NB
Posts: 3,367
|
Quote:
__________________
1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD |
|
|
|
|
|
06-24-2005, 12:49 PM
|
#7 |
|
Where's my beer?
Join Date: Oct 2004
Location: Glen Allen, VA
Posts: 1,772
|
He's talking about on an inline, however that was pretty damn funny.
__________________
70 C10, shortstep, .30 over 250,Hurst shifted 3 spd parts hauler. Holley 390, Clifford Intake, Header, ported cylinder head, unknown bigger cam. 79 Corvette L82, 4 spd, black, red interior, headers, flowmasters, and unkown bigger cam. '03 Grand Cherokee Laredo, 4.0 4x4 daily driver. 165K miles, and runs great '08 Tahoe LTZ 4x4 155K |
|
|
|
|
06-24-2005, 01:43 PM
|
#8 |
|
What are you looking at?
Join Date: Jul 2003
Location: Kellyville,Oklahoma
Posts: 308
|
I recently changed my intake and had to pull the distributor. I just marked exactly where the rotor was pointing and how the cap was. I then loosened the hold down bolt, moved back the hold down bracket and pulled the distributor straight out. I set it out of the way without turning anything. On reinstall I put it right back in and after everything else was done it fired right up....maybe I was just lucky
__________________
1971 GMC LWB 2005 Honda Element 2007 Honda Fit 
|
|
|
|
|
06-24-2005, 02:24 PM
|
#9 |
|
Registered User
Join Date: May 2005
Location: Texarkana, AR 71854
Posts: 397
|
thanks
__________________
2006 Titan SE Crew Cab Daily Driver 2005 Mazda Tribute (Wifes car) 1969 C10 SWB 350/3 Fleet "Max" 1969 Chevelle 2 door 350/3 |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
