need info on borg warner T-10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mooneyes · 06-20-2002, 09:32 PM

i found a old cast T-10 4 speed (car) i read they made these from 1958 - 1963 i was wondering what they put these in..behind the 348 and 409? just very curious so any input would be great...gettin a good deal on this one....... just scattered my saginaw (junk)

Super Chevy · 06-21-2002, 01:12 AM

The cast T-10 is the better of the bunch,the alluminum ones wernt do good they have a couple difforent gear ratio's available for them ,they made a T-10X a T-10Y and another one i cant remember right now,the T-10Y has the 2.88 first,the lowest (numirically higher) ratio then the rest,this is my favorite T-10,they also made a super T-10 which consisted of stronger parts,i have one in the garadge,you can find alot of hop up parts also for these.......

SC

68 Suburban · 06-21-2002, 01:37 AM

Could have been in a Vette.

Blazer1970 · 06-21-2002, 07:27 AM

You can still buy brand new Super T-10s through Richmond. They are about $1300.

mooneyes · 06-21-2002, 07:54 PM

thanks guys..i had one of the aluminum T-10's a few years back just didnt know much about the cast ones..im getting it for $100.00 with a hurst shifter so i wasnt going to *****..thanks again

68 Suburban · 06-21-2002, 08:37 PM

I would say that is a nice buy

mooneyes · 06-25-2002, 09:42 PM

nobody here knows what these things came in?..guess ill have to do some further investigations

68 Suburban · 06-25-2002, 09:55 PM

Quote:

Could have been in a Vette.

mooneyes · 06-25-2002, 10:01 PM

most likely ..vettes and big block impalas is the only thing i can think of they would have put those in from 58-63..thought somebody on here would know for sure

kingparts2 · 06-26-2002, 06:59 PM

Could have been in an AMC!! Both my AMXs had/have T-10s. Send me the numbers from the shifter and I may be able to tell you what it was in. I have a lot of old Hurst info. If it was in an AMC it will not fit a Chevy. Can you get a picture of the shifter???

CoryM · 06-26-2002, 11:21 PM

It is most likely to have come from a 2nd gen camaro,firebird or trans am (70.5-81). If you give me the #s I can probably look them up. They stuck them behind any engine from the 267ci-455ci. I have a Super T10 in my camaro. A T10 or ST10 is definatly tougher than a saginaw from a car.
CoryM

06-20-2002, 09:32 PM	#1
mooneyes Registered User Join Date: Jan 2002 Location: Slippery Rock PA USA Posts: 1,692	need info on borg warner T-10 i found a old cast T-10 4 speed (car) i read they made these from 1958 - 1963 i was wondering what they put these in..behind the 348 and 409? just very curious so any input would be great...gettin a good deal on this one....... just scattered my saginaw (junk) __________________ Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!)

06-21-2002, 01:37 AM	#3
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	Could have been in a Vette. __________________ Just sitting here contemplating contemplation.

06-21-2002, 07:27 AM	#4
Blazer1970 Registered User Join Date: Dec 1999 Location: Old Mission, MI, USA Posts: 2,507	You can still buy brand new Super T-10s through Richmond. They are about $1300. __________________ Tim

06-21-2002, 07:54 PM	#5
mooneyes Registered User Join Date: Jan 2002 Location: Slippery Rock PA USA Posts: 1,692	thanks guys..i had one of the aluminum T-10's a few years back just didnt know much about the cast ones..im getting it for $100.00 with a hurst shifter so i wasnt going to *****..thanks again __________________ Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!)

06-21-2002, 08:37 PM	#6
68 Suburban Registered User Join Date: Oct 2000 Location: From Chicago, Live in Phoenix, AZ Posts: 6,802	I would say that is a nice buy __________________ Just sitting here contemplating contemplation.

06-21-2002, 01:12 AM	#2
Super Chevy Registered User Join Date: Feb 2001 Location: Ohio Posts: 1,025	The cast T-10 is the better of the bunch,the alluminum ones wernt do good they have a couple difforent gear ratio's available for them ,they made a T-10X a T-10Y and another one i cant remember right now,the T-10Y has the 2.88 first,the lowest (numirically higher) ratio then the rest,this is my favorite T-10,they also made a super T-10 which consisted of stronger parts,i have one in the garadge,you can find alot of hop up parts also for these....... SC

06-25-2002, 09:42 PM	#7
mooneyes Registered User Join Date: Jan 2002 Location: Slippery Rock PA USA Posts: 1,692	nobody here knows what these things came in?..guess ill have to do some further investigations __________________ Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!)

06-25-2002, 10:01 PM	#9
mooneyes Registered User Join Date: Jan 2002 Location: Slippery Rock PA USA Posts: 1,692	most likely ..vettes and big block impalas is the only thing i can think of they would have put those in from 58-63..thought somebody on here would know for sure __________________ Ken Lyons, Slippery rock pa 68 short step 327 t10 4 gear 72 2wd blazer project 70 lwb 305/700r driver 78 caprice project 02 cavalier D.D ( hate it!!)

06-26-2002, 06:59 PM	#10
kingparts2 Registered User Join Date: Aug 2001 Location: Columbia, SC USA Posts: 57	Could have been in an AMC!! Both my AMXs had/have T-10s. Send me the numbers from the shifter and I may be able to tell you what it was in. I have a lot of old Hurst info. If it was in an AMC it will not fit a Chevy. Can you get a picture of the shifter??? __________________ Ron King Give me fuel, give me fire, give me that which I desire. Metallica Ever notice in the old Superman shows, he would stand there as the bullets bounced off his chest, but duck when they threw the gun at him!!! Columbia, South Carolina

06-26-2002, 11:21 PM	#11
CoryM Registered User Join Date: Dec 1999 Location: Surrey, B.C. , Canada Posts: 874	It is most likely to have come from a 2nd gen camaro,firebird or trans am (70.5-81). If you give me the #s I can probably look them up. They stuck them behind any engine from the 267ci-455ci. I have a Super T10 in my camaro. A T10 or ST10 is definatly tougher than a saginaw from a car. CoryM __________________ 1970 heavy duty C-10 fleetside sport truck. Vancouver B.C. Canada http://www.geocities.com/chevroletc1070 "Take up our quarrel with the foe: To you from failing hands we throw The torch; be yours to hold it high." Lieutenant Colonel John McCrae, Canadian Army



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.