looking for tubular a-arms - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cynergygoon · 07-16-2005, 04:08 PM

hey guys this is a kool site and this is my first post. im looking for a place to get tubular upper and lower arms for a 73-87 chevy 1/2 ton. i already have it lowered with spindles and springs and all i find are drop a-arms which i dont need. if anyone knows a company that makes these i would like to have a set. thanks for your help. jason

Malo83 · 07-17-2005, 01:53 AM

Check out www.djmsuspension.com, they carry them.
John

boxrodz · 07-17-2005, 03:06 AM

I think the DJM LCAs have a 3" drop. You might want to try Air Ride Technologies Strong Arms. I don't believe that their LCAs have a drop built into them, but they are setup for air springs. (Their bout $750 per side.) I don't think they would work with your springs. I haven't heard of any LCAs with or without a drop made for springs. What's your reason for tubular U/LCAs? Coolness factor or ???

bodydropped · 07-18-2005, 04:32 PM

barn yard custom sell some bada$$ tubular ones there guarranted to lay on 22's for 550 a set

cynergygoon · 07-19-2005, 12:49 AM

thanks for the help guys. the reason i want tubular u-lca is mainly just for the way they look. they are cleaner looking then the factory stamped arms. if i cant find any without the drop built into them i may just get the one with the drop i just hate to waste the money since i have spindles and springs. sure wish i would have thought about it before i lowered it the first time. thanks again jason

07-16-2005, 04:08 PM	#1
cynergygoon Registered User Join Date: Jun 2005 Location: LEBANON MO Posts: 21	looking for tubular a-arms hey guys this is a kool site and this is my first post. im looking for a place to get tubular upper and lower arms for a 73-87 chevy 1/2 ton. i already have it lowered with spindles and springs and all i find are drop a-arms which i dont need. if anyone knows a company that makes these i would like to have a set. thanks for your help. jason

07-17-2005, 03:06 AM	#3
boxrodz Until Seventy Times Seven Join Date: Feb 2005 Location: Rocky Mountain Front Range Posts: 1,301	I think the DJM LCAs have a 3" drop. You might want to try Air Ride Technologies Strong Arms. I don't believe that their LCAs have a drop built into them, but they are setup for air springs. (Their bout $750 per side.) I don't think they would work with your springs. I haven't heard of any LCAs with or without a drop made for springs. What's your reason for tubular U/LCAs? Coolness factor or ??? __________________ boxRODz 1983 C10 SWB Fleetside When two halves is gone, there's nuthin left. Two nothings is nuthin. That's mathematics son. You can argue with me but you can't argue with figures. Two half nothings is a whole nuthin...

07-18-2005, 04:32 PM	#4
bodydropped Registered User Join Date: Jan 2005 Location: beaumont,tx Posts: 757	barn yard custom sell some bada$$ tubular ones there guarranted to lay on 22's for 550 a set __________________ http://img.photobucket.com/albums/v5...ropped/sig.jpg

07-17-2005, 01:53 AM	#2
Malo83 Cruzzzn' Vet Join Date: Jan 2005 Location: Porterville,Ca. Posts: 1,918	Check out www.djmsuspension.com, they carry them. John

07-19-2005, 12:49 AM	#5
cynergygoon Registered User Join Date: Jun 2005 Location: LEBANON MO Posts: 21	thanks for the help guys. the reason i want tubular u-lca is mainly just for the way they look. they are cleaner looking then the factory stamped arms. if i cant find any without the drop built into them i may just get the one with the drop i just hate to waste the money since i have spindles and springs. sure wish i would have thought about it before i lowered it the first time. thanks again jason



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.