hunting tread about rad hoses - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**tnblazerk5** · 07-22-2005, 04:26 PM

there was a tread about rad hoses a while back and it seams to me they found a bottom hose that didnt rub the frame ? anyway i am putting in a 4 core rad (thanks putter for the rad and gman for the delevery

) and tought i would repace the hoses at the same time, so i was hunting the tread i tought it was in the FAQs but i couldnt find it

**tnblazerk5** · 07-22-2005, 09:19 PM

did i dream it

LUV2XCLR8 · 07-22-2005, 09:22 PM

I would like to know that part # for future replacements also

4x4Poet · 07-23-2005, 02:02 AM

PM tomatocity. He was asking about the best rad hoses lately. I posted that NAPA supplied a bottom hose for my '72 K20 pickup with a 350 that didn't have the inner spring and didn't touch the frame. It arches up with about 1/2" clearance. The pickup also has the 3-core rad with upturned lower neck. I couldn't remember the part #, but I could hit up NAPA for just the # if you like. I don't think they'll mind if 20,000 members might be looking.

**tnblazerk5** · 07-23-2005, 09:20 AM

Quote:

Originally Posted by 4x4Poet

PM tomatocity. He was asking about the best rad hoses lately. I posted that NAPA supplied a bottom hose for my '72 K20 pickup with a 350 that didn't have the inner spring and didn't touch the frame. It arches up with about 1/2" clearance. The pickup also has the 3-core rad with upturned lower neck. I couldn't remember the part #, but I could hit up NAPA for just the # if you like. I don't think they'll mind if 20,000 members might be looking.

could you get the part no# please

Cat Fuzz · 07-23-2005, 11:46 AM

I remember that thread. One of the solutions proposed, which is what I did, was to split a small piece of heater hose and place it on the frame. Just providing this info for others who might be reading this thread looking for a cheaper solution.

tomatocity · 07-24-2005, 03:28 AM

Friday I bought the lower hose (pn# 7459) from NAPA and although it says it has a spring in it on the webpage it is not true. I asked the sales person and he gave me the same as 4x4Poet got.
One of the reasons (my 2 cents) the lower hose rubs the frame is because people don't take the time to trim the hose as it should be trimmed and it pushes the hose up into the frame. The lower hose on my truck was kinked because the PO did not take the time to trim it. I was going to trim it and reuse it but decided against it and bought a new one.

NAPA hoses are made by Gates.

Napa
Lower Hose
PN 7352, http://www.napaonline.com/cgi-bin/nc...rpid=107567686
PN 7463 w/AC, http://www.napaonline.com/cgi-bin/nc...rpid=107567683

Upper Hose
PN 7368, http://www.napaonline.com/cgi-bin/nc...rpid=107567687
PN 7459, http://www.napaonline.com/cgi-bin/nc...1&prmenbr=5806

PN 7459 does not search for the NAPA inhouse sales unless they use 1972 if I remember correctly.

This is information I discovered and believe to be correct. I looked at other trucks, searched webpages, and asked questions. Web information ca be very decieving and incorrect, hence the wire coil in the lower hose. The more information we document the safer we are when we buy these kind of items. Most of the inhouse sales personnel live by the computer though ocassionally you will find a good one that knows parts. Had that kind of experience at Autozone today when I was buying a power steering hose for my DD 1993 S10.

What hoses are the other members using? What is the application: year, AC or not, shroud or not, clutch fan or not, 4-core or not, AT or Std, V8 or I6?

Fred T · 07-24-2005, 06:16 AM

This is a 69 SBC with a 4 row radiator and a long water pump. I can't recall the hose number, it was from a 73-80 iirc. Had to trim some off both ends.

**guyryan100** · 07-23-2005, 08:14 AM

I had quite a time trying to find a lower hose for mine. If this thread goes much further somebody will suggest the flex hose that "fits anything". It doesn't fit mine - the curviture is too sharp and the thing tries to crease. And it still rubs the frame.

The important thing to note is whether the lower connection on your radiator protudes straight out towards the tail gate or whether it angles up 45 degrees towards the windsheild. Mine angles up. I tried about 5 hoses, all suggested by the board, and none have worked yet.

So if you find one that fits please post here. :-)

4x4Poet · 07-24-2005, 01:27 AM

On a couple of my trucks, I've wrapped the lower hose near the frame with a cut & tie-wrapped piece of rad hose, Cat Fuzz. I think either stop gap method is a good idea whether the lower rad hose clears the frame or not.

Gotta go to NAPA on Monday, so I'll get the elusive part #.

Remember, I've only claimed that the NAPA hose clears my K20 pickup frame with a 350 engine in the stock 4x4 position and an upturned rad outlet. No promises.

70GMCer · 07-24-2005, 07:42 AM

I've been running mine for years with just a piece of rad hose zip tied underneath. Never had any problems......

4x4Poet · 08-04-2005, 06:26 AM

I finally got to NAPA to buy another lower hose. For my '71 K10 4x4 burb, they gave me part # NEH 7463. The same hose is on my '72 K20 4x4 pickup because I originally purchased it for the burb but used it on the pickup months later (slow resto

).

On the '72 K20, the hose has between 3/8" and 1/2 inch clearance over the frame where the lip is bent up into the top of the frame. I was able to put my Mechanix gloved fingers between the hose and frame without moving the hose.

Looking at the new hose I just bought, I think it clears the frame well because the pre-formed elbow at the water pump is quite pronounced, so it sends the hose more upward than other hoses I've used. It may be that the previous hoses I used that had springs in them were not able to achieve such elbow bends with the spring inside. Just a guess, that spring thing.

For those that missed the other hose thread, one of the NAPA guys said that these hoses don't have springs inside because they are quality and won't collapse. Only cheap quality (not thick rubber, adequate nylon cords, or good density) need the spring. I have no idea, though I've had no collapsing hose issue. Take it FWIW.

Like I said above, no promises. Just my experience on one '72 4x4 truck.

70c10 · 08-04-2005, 07:05 AM

Maybe this thread should be moved to the FAQ forum. I started a thread last year for GM Parts Numbers so we could all go to one central place to look stuff up for this very reason. I think it would be very helpful to all of us.

**tnblazerk5** · 08-04-2005, 10:24 AM

Quote:

Originally Posted by 70c10

Maybe this thread should be moved to the FAQ forum. I started a thread last year for GM Parts Numbers so we could all go to one central place to look stuff up for this very reason. I think it would be very helpful to all of us.

i 2nd that this needs moved to the FAQ board

thecatseye66 · 08-04-2005, 12:51 PM

Quote:

Originally Posted by tnblazerk5

i 2nd that this needs moved to the FAQ board

I 3rd...Krue?

mrein3 · 08-04-2005, 01:25 PM

As somebody stated above, you need the correct part number AND you need to trim off a bit for the hose to fit right.
I bought a new hose at Checkers while my 4-row radiator was in the mail. When I got it the hose I asked for at Checkers fit PERFECT after cutting off a bit from the water pump end.

70c10 · 08-04-2005, 07:15 PM

I used a Drive Rite (made by Dayco) from advance auto parts part #E70664 and trimmed a little. http://www.daycoproducts.com/daycowe..._Hose?OpenForm

07-22-2005, 04:26 PM	#1
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	hunting tread about rad hoses there was a tread about rad hoses a while back and it seams to me they found a bottom hose that didnt rub the frame ? anyway i am putting in a 4 core rad (thanks putter for the rad and gman for the delevery ) and tought i would repace the hoses at the same time, so i was hunting the tread i tought it was in the FAQs but i couldnt find it

07-22-2005, 09:22 PM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	I would like to know that part # for future replacements also __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

07-23-2005, 02:02 AM	#4
4x4Poet Registered User Join Date: Nov 2004 Location: "Under Montana skies." Posts: 1,836	PM tomatocity. He was asking about the best rad hoses lately. I posted that NAPA supplied a bottom hose for my '72 K20 pickup with a 350 that didn't have the inner spring and didn't touch the frame. It arches up with about 1/2" clearance. The pickup also has the 3-core rad with upturned lower neck. I couldn't remember the part #, but I could hit up NAPA for just the # if you like. I don't think they'll mind if 20,000 members might be looking. __________________ '71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup.

07-23-2005, 11:46 AM	#6
Cat Fuzz My son, my joy. Join Date: Sep 2003 Location: Spokane WA Posts: 463	I remember that thread. One of the solutions proposed, which is what I did, was to split a small piece of heater hose and place it on the frame. Just providing this info for others who might be reading this thread looking for a cheaper solution. __________________ '69 Chevy 3/4 ton, 327cid, Carter AFB, Edelbrock intake, HEI, TH400. Founding member of the No Money To Spend On My Truck Club. When your at Home Depot, you WISH you had gotten an 8 foot bed!

07-24-2005, 03:28 AM	#7
tomatocity Registered User Join Date: Jun 2005 Location: Sacramento CA Posts: 1,255	Friday I bought the lower hose (pn# 7459) from NAPA and although it says it has a spring in it on the webpage it is not true. I asked the sales person and he gave me the same as 4x4Poet got. One of the reasons (my 2 cents) the lower hose rubs the frame is because people don't take the time to trim the hose as it should be trimmed and it pushes the hose up into the frame. The lower hose on my truck was kinked because the PO did not take the time to trim it. I was going to trim it and reuse it but decided against it and bought a new one. NAPA hoses are made by Gates. Napa Lower Hose PN 7352, http://www.napaonline.com/cgi-bin/nc...rpid=107567686 PN 7463 w/AC, http://www.napaonline.com/cgi-bin/nc...rpid=107567683 Upper Hose PN 7368, http://www.napaonline.com/cgi-bin/nc...rpid=107567687 PN 7459, http://www.napaonline.com/cgi-bin/nc...1&prmenbr=5806 PN 7459 does not search for the NAPA inhouse sales unless they use 1972 if I remember correctly. This is information I discovered and believe to be correct. I looked at other trucks, searched webpages, and asked questions. Web information ca be very decieving and incorrect, hence the wire coil in the lower hose. The more information we document the safer we are when we buy these kind of items. Most of the inhouse sales personnel live by the computer though ocassionally you will find a good one that knows parts. Had that kind of experience at Autozone today when I was buying a power steering hose for my DD 1993 S10. What hoses are the other members using? What is the application: year, AC or not, shroud or not, clutch fan or not, 4-core or not, AT or Std, V8 or I6? __________________ Got bored, sold everthing. Got bored, looking for a 1960-66 C-10. Want to build my last truck. Last edited by tomatocity; 07-24-2005 at 03:30 AM.

07-22-2005, 09:19 PM	#2
tnblazerk5 User #12137 Join Date: Apr 2004 Location: kingsport,upper east tenn Posts: 11,598	did i dream it

07-24-2005, 06:16 AM	#8
Fred T Cantankerous Geezer Join Date: Aug 2002 Location: Bel Aire, KS Posts: 6,264	This is a 69 SBC with a 4 row radiator and a long water pump. I can't recall the hose number, it was from a 73-80 iirc. Had to trim some off both ends. Attached Images __________________ Fred There is no such thing as too much cam...just not enough engine.

07-23-2005, 08:14 AM	#9
guyryan100 Registered User Join Date: Sep 2001 Location: Cumming, GA Posts: 481	I had quite a time trying to find a lower hose for mine. If this thread goes much further somebody will suggest the flex hose that "fits anything". It doesn't fit mine - the curviture is too sharp and the thing tries to crease. And it still rubs the frame. The important thing to note is whether the lower connection on your radiator protudes straight out towards the tail gate or whether it angles up 45 degrees towards the windsheild. Mine angles up. I tried about 5 hoses, all suggested by the board, and none have worked yet. So if you find one that fits please post here. :-)

07-24-2005, 01:27 AM	#10
4x4Poet Registered User Join Date: Nov 2004 Location: "Under Montana skies." Posts: 1,836	On a couple of my trucks, I've wrapped the lower hose near the frame with a cut & tie-wrapped piece of rad hose, Cat Fuzz. I think either stop gap method is a good idea whether the lower rad hose clears the frame or not. Gotta go to NAPA on Monday, so I'll get the elusive part #. Remember, I've only claimed that the NAPA hose clears my K20 pickup frame with a 350 engine in the stock 4x4 position and an upturned rad outlet. No promises. __________________ '71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup.

07-24-2005, 07:42 AM	#11
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	I've been running mine for years with just a piece of rad hose zip tied underneath. Never had any problems...... __________________ 1997 GMC Sierra Ext 1965 Mustang

08-04-2005, 06:26 AM	#12
4x4Poet Registered User Join Date: Nov 2004 Location: "Under Montana skies." Posts: 1,836	I finally got to NAPA to buy another lower hose. For my '71 K10 4x4 burb, they gave me part # NEH 7463. The same hose is on my '72 K20 4x4 pickup because I originally purchased it for the burb but used it on the pickup months later (slow resto). On the '72 K20, the hose has between 3/8" and 1/2 inch clearance over the frame where the lip is bent up into the top of the frame. I was able to put my Mechanix gloved fingers between the hose and frame without moving the hose. Looking at the new hose I just bought, I think it clears the frame well because the pre-formed elbow at the water pump is quite pronounced, so it sends the hose more upward than other hoses I've used. It may be that the previous hoses I used that had springs in them were not able to achieve such elbow bends with the spring inside. Just a guess, that spring thing. For those that missed the other hose thread, one of the NAPA guys said that these hoses don't have springs inside because they are quality and won't collapse. Only cheap quality (not thick rubber, adequate nylon cords, or good density) need the spring. I have no idea, though I've had no collapsing hose issue. Take it FWIW. Like I said above, no promises. Just my experience on one '72 4x4 truck. __________________ '71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup.

08-04-2005, 07:05 AM	#13
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Maybe this thread should be moved to the FAQ forum. I started a thread last year for GM Parts Numbers so we could all go to one central place to look stuff up for this very reason. I think it would be very helpful to all of us. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

08-04-2005, 01:25 PM	#16
mrein3 Registered User Join Date: Feb 2000 Location: Center City, MN, USA Posts: 3,253	As somebody stated above, you need the correct part number AND you need to trim off a bit for the hose to fit right. I bought a new hose at Checkers while my 4-row radiator was in the mail. When I got it the hose I asked for at Checkers fit PERFECT after cutting off a bit from the water pump end. __________________ '70 cab, '71 chassis, 383, TH350, NP205. '71 Malibu convertible '72 Malibu hard top Center City, MN

08-04-2005, 07:15 PM	#17
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	I used a Drive Rite (made by Dayco) from advance auto parts part #E70664 and trimmed a little. http://www.daycoproducts.com/daycowe..._Hose?OpenForm __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.