Short fleet and step bed for parts and misc stuff f/s - The 1947 - Present Chevrolet & GMC Truck Message Board Network

muddyole 69 · 07-28-2005, 03:35 AM

I am cleaning up the stash what I have is a rusty short step bed that has a good headboard decent wood floor runners wood is shot tailgate is rusty but would work for a beater the chains and hooks are in good shape fenders were from arizona but have rusted on the inner lip and bottoms of the fenders steps are really nice with no rust will sell whole or part prefer whole for 100 bucks

I also have a super nice fleet bed from alabama 500 and the ride or will help with delivery within a couple hundred miles for gas money

also have the spacer that goes under air cleaner with tube that goes over to the valve cover 20 and shipping

steel radiator upper hose minor rust on one end used on my truck til last week 15 and shipping

5 lug front end conversion 75 and you can come and get it all or will ship at your expense

standard bore 350 block 4 bolt main 010/020 high nickle block 125 and the ride

th 350 core 35 and ride

th 350 xfer case out of 78 1/2 ton pretty sure its a 203 with shift linkages and adapter 100 and ride

1965 283 shortblock out of a truck 50 and the ride

70-71 chevy grill and surround driver quality 60 and the ride

door hinges off 71 blazer pass lower is loose 15 and the ride

glove box door off same blazer 10 and the ride

knobs off factory am free if you want to pay shipping (gone)

dana 60 14 bolt ff 4.10 gears have frame for 80 K 30 1200 all

thats all I can think of off the top of my head let me know if you can use any of this stuff I can get pics but work nights and am a bit slow about getting pics so please bear with me thanks mike

GMC Jim · 07-28-2005, 03:43 AM

can use the knobs from the AM radio... shipping to zip 97233 ? and thanks

.030over · 07-28-2005, 06:22 AM

I'll be first in line on the short fleet bed pending better description of condition and pictures. I am near Baltimore and would come pick it up.
Scott

PMd ya!

arkracing · 07-28-2005, 07:49 AM

1st in line If you decide to part the step bed I would like:

The front Stake Pockets (Just cut the sides of the bed down with a sawzall or whatever)
and the Cross Sills including the rear if it isn't all rotted.
and the rear taillight wiring harness if it is still in decent shape.
and the steps

Price + Shipping to 06040 and Pictures if you decide to go that route

Let me know
Thanks,
Andy

bowtie · 07-28-2005, 11:35 AM

next in line for the bed, also pending pics

muddyole 69 · 07-28-2005, 07:14 PM

Short Fleet : guys I will get pics tomorrow and post in the evening when I get up 4 work thanks MIke

Short Step: would like to try to sell whole but you are first in line Mike

Knobs : Will get a quote and pm you Mike

byrd · 07-28-2005, 07:41 PM

3rd for the bed and I would come and get it Randy

muddyole 69 · 07-29-2005, 09:58 AM

Shortbed pics first come first serve on this thanks Mike

muddyole 69 · 07-29-2005, 10:01 AM

round 2

muddyole 69 · 07-29-2005, 10:10 AM

more

muddyole 69 · 07-29-2005, 10:12 AM

last ones

byrd · 07-29-2005, 09:39 PM

I will have to pass as well, thanks again for the pics, Randy

jims69 · 07-30-2005, 12:22 AM

muddyole69. hows about $400 and I pick it up for the SWB bed. If anyone is in front of me proceed if not let me know.

muddyole 69 · 07-30-2005, 12:42 AM

pm sent

jims69 · 07-30-2005, 08:24 AM

I'll try to give you a call around noon today.

muddyole 69 · 07-31-2005, 03:34 AM

ttt

arkracing · 07-31-2005, 09:17 PM

PM Returned

07-28-2005, 03:35 AM	#1
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Short fleet and step bed for parts and misc stuff f/s I am cleaning up the stash what I have is a rusty short step bed that has a good headboard decent wood floor runners wood is shot tailgate is rusty but would work for a beater the chains and hooks are in good shape fenders were from arizona but have rusted on the inner lip and bottoms of the fenders steps are really nice with no rust will sell whole or part prefer whole for 100 bucks I also have a super nice fleet bed from alabama 500 and the ride or will help with delivery within a couple hundred miles for gas money also have the spacer that goes under air cleaner with tube that goes over to the valve cover 20 and shipping steel radiator upper hose minor rust on one end used on my truck til last week 15 and shipping 5 lug front end conversion 75 and you can come and get it all or will ship at your expense standard bore 350 block 4 bolt main 010/020 high nickle block 125 and the ride th 350 core 35 and ride th 350 xfer case out of 78 1/2 ton pretty sure its a 203 with shift linkages and adapter 100 and ride 1965 283 shortblock out of a truck 50 and the ride 70-71 chevy grill and surround driver quality 60 and the ride door hinges off 71 blazer pass lower is loose 15 and the ride glove box door off same blazer 10 and the ride knobs off factory am free if you want to pay shipping (gone) dana 60 14 bolt ff 4.10 gears have frame for 80 K 30 1200 all thats all I can think of off the top of my head let me know if you can use any of this stuff I can get pics but work nights and am a bit slow about getting pics so please bear with me thanks mike __________________ hav'n fun be'n me Last edited by muddyole 69; 07-31-2005 at 03:33 AM. Reason: MORE INFO

07-28-2005, 03:43 AM	#2
GMC Jim Senior Member Join Date: Dec 2002 Location: Portland, Oregon Posts: 901	can use the knobs from the AM radio... shipping to zip 97233 ? and thanks __________________ '71 GMC;fleetside;PB/PS/AC/CC/402 Eng./Custom Paint/110,000act miles/3 fuel tanks(52gal).

07-28-2005, 06:22 AM	#3
.030over Junior Member Join Date: Mar 2005 Location: Maryland Posts: 129	Short fleet bed I'll be first in line on the short fleet bed pending better description of condition and pictures. I am near Baltimore and would come pick it up. Scott PMd ya! __________________ '67 SWB big block project '85 C60 school bus motorhome conversion

07-28-2005, 07:49 AM	#4
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	1st in line If you decide to part the step bed I would like: The front Stake Pockets (Just cut the sides of the bed down with a sawzall or whatever) and the Cross Sills including the rear if it isn't all rotted. and the rear taillight wiring harness if it is still in decent shape. and the steps Price + Shipping to 06040 and Pictures if you decide to go that route Let me know Thanks, Andy __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered Last edited by arkracing; 07-28-2005 at 07:53 AM.

07-28-2005, 11:35 AM	#5
bowtie Senior Member Join Date: Dec 1999 Location: Saskatchewan Posts: 1,050	next in line for the bed, also pending pics __________________ ~70 GMCprostreet swb 396/700r NOS 575 hp "the Brick" ~72 chev swb w/68 front clip "GM Millenium corvette yellow" I use and accept Paypal

07-28-2005, 07:14 PM	#6
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	pics Short Fleet : guys I will get pics tomorrow and post in the evening when I get up 4 work thanks MIke Short Step: would like to try to sell whole but you are first in line Mike Knobs : Will get a quote and pm you Mike __________________ hav'n fun be'n me

07-29-2005, 09:58 AM	#8
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	pics Shortbed pics first come first serve on this thanks Mike Attached Images __________________ hav'n fun be'n me

07-29-2005, 10:01 AM	#9
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	more pics round 2 Attached Images __________________ hav'n fun be'n me

07-29-2005, 10:10 AM	#10
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	round 3 more Attached Images __________________ hav'n fun be'n me

07-29-2005, 10:12 AM	#11
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	pics last ones Attached Images __________________ hav'n fun be'n me

07-30-2005, 12:22 AM	#13
jims69 Registered User Join Date: Feb 2005 Posts: 82	muddyole69. hows about $400 and I pick it up for the SWB bed. If anyone is in front of me proceed if not let me know. __________________ Jim SW PA. 69' GMC SWB 4X4 (in progress). 86' GMC LWB 4X4 (daily) 86' Chevy LWB 4X4 (beater)

07-30-2005, 12:42 AM	#14
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	bed pm sent __________________ hav'n fun be'n me

07-30-2005, 08:24 AM	#15
jims69 Registered User Join Date: Feb 2005 Posts: 82	I'll try to give you a call around noon today. __________________ Jim SW PA. 69' GMC SWB 4X4 (in progress). 86' GMC LWB 4X4 (daily) 86' Chevy LWB 4X4 (beater)

07-31-2005, 03:34 AM	#16
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	parts ttt __________________ hav'n fun be'n me

07-31-2005, 09:17 PM	#17
arkracing Weekend Warrior Join Date: Oct 2004 Location: CT Posts: 1,787	PM Returned __________________ -'07 GMC Sierra K2500HD -'66 C10 Suburban -'68/'71 K20 Service Bed Project -'69 Chevy C30 Mason Dump -'33Ford P/U 396ChevyPowered



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.