Saginaw 4 Speed Shifter+Linkage NEED ASAP - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevykid04 · 08-01-2005, 11:32 PM

Just bought a 4 speed saginaw transmission out of a 1972 firebird i believe, and want to install it in place of the old 3 speed sag, need the shifter and linkage ASAP, like i mean tomorrow guys.... if you dont know the application of your shifter (like maybe its a hurst or you just dont remember) just look at the reverse rod. i need the long one. I live in Hudson, WI 54016... either respond here, or talk to Shane/leave a message at 715 549 6184...Thanks

bowtie · 08-02-2005, 12:24 AM

Would this be the one your looking for? I took it out of my 55 chevy BBC.

chevykid04 · 08-02-2005, 09:44 AM

thanks so much for the quick reply, but that looks like the Muncie Linkage, Muncies reverse input shaft was in the extension housing, while a saginaw has all three input shafts in the side cover, again, thanks for the reply

chevykid04 · 08-02-2005, 08:09 PM

bump

chevykid04 · 08-03-2005, 08:20 AM

No longer needed, won one on ebay, thanks

08-01-2005, 11:32 PM	#1
chevykid04 4 speed, hurst shiftin Join Date: Jun 2002 Location: Hudson, Wi Posts: 406	Saginaw 4 Speed Shifter+Linkage NEED ASAP Just bought a 4 speed saginaw transmission out of a 1972 firebird i believe, and want to install it in place of the old 3 speed sag, need the shifter and linkage ASAP, like i mean tomorrow guys.... if you dont know the application of your shifter (like maybe its a hurst or you just dont remember) just look at the reverse rod. i need the long one. I live in Hudson, WI 54016... either respond here, or talk to Shane/leave a message at 715 549 6184...Thanks __________________ Shane 1970 Chevy C10

08-02-2005, 12:24 AM	#2
bowtie Senior Member Join Date: Dec 1999 Location: Saskatchewan Posts: 1,050	Would this be the one your looking for? I took it out of my 55 chevy BBC. __________________ ~70 GMCprostreet swb 396/700r NOS 575 hp "the Brick" ~72 chev swb w/68 front clip "GM Millenium corvette yellow" I use and accept Paypal

08-02-2005, 09:44 AM	#3
chevykid04 4 speed, hurst shiftin Join Date: Jun 2002 Location: Hudson, Wi Posts: 406	thanks so much for the quick reply, but that looks like the Muncie Linkage, Muncies reverse input shaft was in the extension housing, while a saginaw has all three input shafts in the side cover, again, thanks for the reply __________________ Shane 1970 Chevy C10

08-02-2005, 08:09 PM	#4
chevykid04 4 speed, hurst shiftin Join Date: Jun 2002 Location: Hudson, Wi Posts: 406	bump __________________ Shane 1970 Chevy C10

08-03-2005, 08:20 AM	#5
chevykid04 4 speed, hurst shiftin Join Date: Jun 2002 Location: Hudson, Wi Posts: 406	No longer needed, won one on ebay, thanks __________________ Shane 1970 Chevy C10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.