5 lug axles for 67 chevy - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dudeatlarge · 08-07-2005, 08:37 PM

I will be putting a front crossmember setup from a 88 suburban under my 67 SWB 1/2 ton (6 bolt). I would like to have 5 bolt rear axles with the same bolt pattern. Is there any axles that will swap right in? If not is there a rear end with 5 bolt lugs that is a dirrect replacement? I have tried to read through all the posts ,but there are so many. Any help would be greatly appreciated.

-Doug-

Longhorn Man · 08-07-2005, 09:20 PM

Asuming you have a coil rear, the only direct swap would be a 71 or 72 rear end.

Dudeatlarge · 08-07-2005, 10:27 PM

Thanks very much..

Low69CST · 08-08-2005, 06:39 AM

You can have your axle and drums redrilled at Moser for 100 plus shipping. You could also have a set made for 250 I think?

69 longhorn · 08-08-2005, 10:05 AM

Yup, new Moser axles , with studs & shipping were $260 to my door

Dudeatlarge · 08-08-2005, 05:54 PM

Thanks for the Moser idea. That will probably be the way i go.
Thanks Again, Doug

08-07-2005, 08:37 PM	#1
Dudeatlarge New Member Join Date: May 2005 Location: A Kansas Wheat Field Posts: 8	5 lug axles for 67 chevy I will be putting a front crossmember setup from a 88 suburban under my 67 SWB 1/2 ton (6 bolt). I would like to have 5 bolt rear axles with the same bolt pattern. Is there any axles that will swap right in? If not is there a rear end with 5 bolt lugs that is a dirrect replacement? I have tried to read through all the posts ,but there are so many. Any help would be greatly appreciated. -Doug-

08-08-2005, 06:39 AM	#4
Low69CST Registered User Join Date: May 2000 Location: Frankfort, Kentucky, USA Posts: 2,163	You can have your axle and drums redrilled at Moser for 100 plus shipping. You could also have a set made for 250 I think? __________________ '69 CST Short fleetside Lowered, 400 small block, 700R4, 4 wheel disc brakes, front sway bar & rear camaro sway bar (in progress) '87 V10 4x4 Short Fleetside Quad Suspension and Dual Tanks

08-08-2005, 10:05 AM	#5
69 longhorn Registered User Join Date: Aug 2001 Location: rock island,il,usa Posts: 5,382	Yup, new Moser axles , with studs & shipping were $260 to my door __________________ http://community.webshots.com/user/hotrodhorn

08-07-2005, 09:20 PM	#2
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Asuming you have a coil rear, the only direct swap would be a 71 or 72 rear end.

08-07-2005, 10:27 PM	#3
Dudeatlarge New Member Join Date: May 2005 Location: A Kansas Wheat Field Posts: 8	Thanks very much..

08-08-2005, 05:54 PM	#6
Dudeatlarge New Member Join Date: May 2005 Location: A Kansas Wheat Field Posts: 8	Thanks for the Moser idea. That will probably be the way i go. Thanks Again, Doug



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.