Extra parts from my '69 K5 4 Sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Musclerodz · 08-14-2005, 08:40 PM

I am selling off the extras as I find I don't need them anymore from my restoration. I am sure I will have more to sell as I progress.

1. 350 motor with 2 barrel carb mated to TH350 tranny. Does NOT include transfer case. Both less than 20K since rebuild but sitting since '98, $300

2. Power steering pump put on right before Blazer was parked, cap fits loose, I think it needs a gasket, $35

3. Engine fan and clutch, (SOLD)

4. Radiator fan shroud 4WD, $15

5. New points distributer aftermarket OE replacement, (SOLD)

6. RH fender minor damage in front, fixable, no rust in the bottom, $25

7. Air cleaner OE, $15

8. Holley 4252-1 square bore 4 barrel, looks decent, been sitting awhile, $65

9. Early iron manifold to fit Holley above, front oil fill, (SOLD)

10 Front buckets, non original covers, drivers side torn, $250

11. Under dash heater assy with controls, $100

12. NOS heater only controls in the box, (SOLD)

13. NOS K5 side trim black, 8 of 10 pcs. missing same piece on both sides between door and rear wheel opening, still in original packaging, $250

14. Used slightly dented Blazer fuel tank with sender, $65 shipped

15. New steel fuel tank kit complete still in the box shipped to me, (SOLD)

16. '69-72 hood good shape $75

17. Gauge cluster with aftermarket tach, extra speedo and fuel guage, $25

18. Light bar with 4 lights, 2 are KC, $35

19. Steering box freshly rebuilt before truck was parked, $75

20. NOS 15x6 ralley spare, $40 (pic in post #50)

As I find more stuff I will update it here. I take Paypal or MO or cash. I prefer not to ship the bigger stuff but will if need be. I am South of OKC, OK 30 min. if someone would like to pick anything up. Here is a few things I am willing to trade for:

1. Perfect or near Blazer or truck doors.

2. Perfect or near '67-'68 hood

3. Good 12 bolt POSI unit for 3.73+ gears

4. New hood hinges

5. Good '73 or later steering box to use with lift kit.

6. Good RH inner fender

You can PM, email or post here for inqiures.

Mike

*rage'nrat638* · 08-14-2005, 09:21 PM

9. Early iron manifold to fit Holley above, front oil fill, $35
i will take this.....can paypal
ship to
mark ramirez
2400 nan st
aurora il 60504

Musclerodz · 08-14-2005, 10:00 PM

Quote:

Originally Posted by rage'nrat638

9. Early iron manifold to fit Holley above, front oil fill, $35
i will take this.....can paypal
ship to
mark ramirez
2400 nan st
aurora il 60504

PM sent twice, did not see your zip first time.

Mike

*rage'nrat638* · 08-14-2005, 11:09 PM

Intake sold
Need Addy To Send Mo....
Or E-mail To Paypal

Musclerodz · 08-14-2005, 11:16 PM

Quote:

Originally Posted by rage'nrat638

Intake sold
Need Addy To Send Mo....
Or E-mail To Paypal

pm replied

Mike

*rage'nrat638* · 08-14-2005, 11:22 PM

you got cash my friend.....thanks mark....the rage

LUV2XCLR8 · 08-14-2005, 09:24 PM

Quote:

Originally Posted by Musclerodz

2. Power steering pump put on right before Blazer was parked, cap fits loose, I think it needs a gasket, $45

Does this include the Brackets

Musclerodz · 08-14-2005, 09:53 PM

Quote:

Originally Posted by LUV2XCLR8

Does this include the Brackets

Nope. Brackets were Z/28 Camaro. They are on ebay now.

Mike

**zeusflash** · 08-16-2005, 11:54 PM

What is the condition of the engine fan and clutch?(clutch tight/damaged blades) Same question on the OE aircleaner.(corrosion/dents) How much to ship to 83854?
Thanks,
Mike

Musclerodz · 08-17-2005, 12:11 PM

Quote:

Originally Posted by zeusflash

What is the condition of the engine fan and clutch?(clutch tight/damaged blades) Same question on the OE aircleaner.(corrosion/dents) How much to ship to 83854?
Thanks,
Mike

Clutch has resistance, but don't have a new one to check it against. No damage to the blades. Air cleaner has couple of small surface rust spots easily removed and no dents. Shipping around $15

Mike

**D.PASSMORE** · 08-17-2005, 12:58 PM

The doors that you listed, do you have a original passenger side blazer door that is in good shape?

Musclerodz · 08-17-2005, 06:10 PM

Quote:

Originally Posted by D.PASSMORE

The doors that you listed, do you have a original passenger side blazer door that is in good shape?

I have an original door but needs work. Has a speaker hole in it as well.

Mike

Larry68GMC · 08-17-2005, 01:41 AM

Can you get the numbers from the block and heads on the engine? 2 or 4 bolt? Thanks...

Musclerodz · 08-17-2005, 06:08 PM

Quote:

Originally Posted by Larry68GMC

Can you get the numbers from the block and heads on the engine? 2 or 4 bolt? Thanks...

Block casting is a 3970010. Head # all I have found is an 063. I have not checked the vin yet but if it is the original block which I "don't" think it is, but if it is I will be keeping it. I am just South of Norman if you want to come look.

Mike

zachary2001 · 08-17-2005, 06:26 PM

What Is You Low Dollar On The Motor I Don't Really Need The Transmission I Just Had My Rebuilt Always A Day Late Or A Dollar Short ...

Musclerodz · 08-17-2005, 06:55 PM

Quote:

Originally Posted by zachary2001

What Is You Low Dollar On The Motor I Don't Really Need The Transmission I Just Had My Rebuilt Always A Day Late Or A Dollar Short ...

I would take $200 for the motor

Mike

**D.PASSMORE** · 08-17-2005, 07:35 PM

Got pictures of the blazer door with damaged spots and rusty areas?

Musclerodz · 08-18-2005, 01:25 PM

Quote:

Originally Posted by D.PASSMORE

Got pictures of the blazer door with damaged spots and rusty areas?

Did some more checking, and the door has big harry crack at the upper hinge.
I have another door, but it is a converted pickup door. Some people say there is a difference, but I don't see it. Plus the assembly manual they sell shows you where to cut the doors for use on a Blazer.

Mike

Blunova · 08-17-2005, 11:08 PM

Lookin for a centerlink?

Musclerodz · 08-18-2005, 01:26 PM

Quote:

Originally Posted by Blunova

Lookin for a centerlink?

I'm lost. More description?

Mike

**zeusflash** · 08-17-2005, 11:26 PM

I'll take the fan and clutch. Let me know the total,I can do Paypal or MO/certified check. Let me know what you prefer.

Musclerodz · 08-18-2005, 01:29 PM

Quote:

Originally Posted by zeusflash

I'll take the fan and clutch. Let me know the total,I can do Paypal or MO/certified check. Let me know what you prefer.

$27.50 shipped. paypal is much easier and faster. You have PM.

Mike

Musclerodz · 08-19-2005, 05:30 PM

Quote:

Originally Posted by zeusflash

I'll take the fan and clutch. Let me know the total,I can do Paypal or MO/certified check. Let me know what you prefer.

Fan/clutch is boxed but I can't get it out till Monday. I will send then.

Mike

zachary2001 · 08-18-2005, 12:56 PM

What Kind Of Deal Would You Make Me On The Used Blazer Tank And The Motor? Would You Be Up For Any Trades?

Musclerodz · 08-18-2005, 01:32 PM

Quote:

Originally Posted by zachary2001

What Kind Of Deal Would You Make Me On The Used Blazer Tank And The Motor? Would You Be Up For Any Trades?

$250 for the pair. Trades depends on what you got. I have a short list in my first post, but I am sure I will need some other items along the way.

Mike

08-14-2005, 08:40 PM	#1
Musclerodz Senior Member Join Date: Aug 2005 Location: OKC, OK Posts: 2,364	Extra parts from my '69 K5 4 Sale (UPDATED 8/23) I am selling off the extras as I find I don't need them anymore from my restoration. I am sure I will have more to sell as I progress. 1. 350 motor with 2 barrel carb mated to TH350 tranny. Does NOT include transfer case. Both less than 20K since rebuild but sitting since '98, $300 2. Power steering pump put on right before Blazer was parked, cap fits loose, I think it needs a gasket, $35 3. Engine fan and clutch, (SOLD) 4. Radiator fan shroud 4WD, $15 5. New points distributer aftermarket OE replacement, (SOLD) 6. RH fender minor damage in front, fixable, no rust in the bottom, $25 7. Air cleaner OE, $15 8. Holley 4252-1 square bore 4 barrel, looks decent, been sitting awhile, $65 9. Early iron manifold to fit Holley above, front oil fill, (SOLD) 10 Front buckets, non original covers, drivers side torn, $250 11. Under dash heater assy with controls, $100 12. NOS heater only controls in the box, (SOLD) 13. NOS K5 side trim black, 8 of 10 pcs. missing same piece on both sides between door and rear wheel opening, still in original packaging, $250 14. Used slightly dented Blazer fuel tank with sender, $65 shipped 15. New steel fuel tank kit complete still in the box shipped to me, (SOLD) 16. '69-72 hood good shape $75 17. Gauge cluster with aftermarket tach, extra speedo and fuel guage, $25 18. Light bar with 4 lights, 2 are KC, $35 19. Steering box freshly rebuilt before truck was parked, $75 20. NOS 15x6 ralley spare, $40 (pic in post #50) As I find more stuff I will update it here. I take Paypal or MO or cash. I prefer not to ship the bigger stuff but will if need be. I am South of OKC, OK 30 min. if someone would like to pick anything up. Here is a few things I am willing to trade for: 1. Perfect or near Blazer or truck doors. 2. Perfect or near '67-'68 hood 3. Good 12 bolt POSI unit for 3.73+ gears 4. New hood hinges 5. Good '73 or later steering box to use with lift kit. 6. Good RH inner fender You can PM, email or post here for inqiures. Mike Last edited by Musclerodz; 08-24-2005 at 05:03 PM.

08-14-2005, 09:21 PM	#2
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	intake 9. Early iron manifold to fit Holley above, front oil fill, $35 i will take this.....can paypal ship to mark ramirez 2400 nan st aurora il 60504

08-14-2005, 11:09 PM	#4
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Cast Squrebore Intake Intake sold Need Addy To Send Mo.... Or E-mail To Paypal

08-16-2005, 11:54 PM	#9
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	What is the condition of the engine fan and clutch?(clutch tight/damaged blades) Same question on the OE aircleaner.(corrosion/dents) How much to ship to 83854? Thanks, Mike __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

08-17-2005, 12:58 PM	#11
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Doors The doors that you listed, do you have a original passenger side blazer door that is in good shape?

08-14-2005, 11:22 PM	#6
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	you got cash my friend.....thanks mark....the rage

08-17-2005, 01:41 AM	#13
Larry68GMC Registered User Join Date: Aug 2001 Location: Midwest City, OK Posts: 289	Can you get the numbers from the block and heads on the engine? 2 or 4 bolt? Thanks... __________________ 71 GMC LWB 350, Dart Pro1's 200/64cc,10.2:1 RPM AirGap, 224/234 @50 496/518 lift w/1.6 roller rockers, 2500 stall '05 Dodge 2500 Crew Cab 4x4, 4 inch lift and 35's CTD

08-17-2005, 06:26 PM	#15
zachary2001 Registered User Join Date: Aug 2005 Location: Celeste Texas Posts: 67	What Is You Low Dollar On The Motor I Don't Really Need The Transmission I Just Had My Rebuilt Always A Day Late Or A Dollar Short ...

08-17-2005, 07:35 PM	#17
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,059	Doors Got pictures of the blazer door with damaged spots and rusty areas?

08-17-2005, 11:08 PM	#19
Blunova Registered User Join Date: Dec 2000 Location: Noble, OK USA Posts: 125	Lookin for a centerlink? __________________ 69 C10 65 Chevy II

08-17-2005, 11:26 PM	#21
zeusflash Senior Member Join Date: Feb 2005 Location: Post Falls,Idaho Posts: 691	I'll take the fan and clutch. Let me know the total,I can do Paypal or MO/certified check. Let me know what you prefer. __________________ '69 3/4 ton 427 CST Pickup '71 CST Blazer '72 GMC 3/4 4x4

08-18-2005, 12:56 PM	#24
zachary2001 Registered User Join Date: Aug 2005 Location: Celeste Texas Posts: 67	What Kind Of Deal Would You Make Me On The Used Blazer Tank And The Motor? Would You Be Up For Any Trades?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.