1982 GMC Hydro-Boost Core - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**RPOZ11** · 08-21-2005, 09:51 PM

Anyone have a need for this?
It was from a 1982 1-ton dually Camper Special with a 454/T400 411 rear gears...
It is a core, been sitting for a while and I am sure it will need to be R/R'd!
Worth?
Best offer takes it!

*bisquik65* · 08-21-2005, 10:21 PM

1st take the master cylinder off,so its will fit in a smaller box.. And i would give you $35 shipped ? to 28705 Let me know,Interested...i could use that...Thanks,Erick

**RPOZ11** · 08-21-2005, 10:31 PM

I dont know the shipping costs to you; I Use UPS...
www.ups.com
ground to you by weight, box size, and zip code destination charges

*bisquik65* · 08-21-2005, 10:38 PM

I would say,about 15 lbs without the master cyl,14 inches long,8 wide 8 high and my zip is 28705..

**RPOZ11** · 08-21-2005, 10:45 PM

Ok, well send that to me!
If the costs exceed reasonability, I will contact you first before shipping it!
SOLD!

*bisquik65* · 08-21-2005, 10:55 PM

Pm sent...with info

**RPOZ11** · 08-21-2005, 11:16 PM

For some reason I cant connect very fast right now, and I didnt see the PM...I will look a little later after I return from some eats!
Ciao!

*1FaastC10* · 08-22-2005, 01:10 AM

too bad i didnt see this yesterday, i just threw away a good set of lines for an o ring hydroboost setup. if someone is interested in a hydroboost pump (with 2 return fittings) i believe i've got one laying around, might even have a set of brackets for a small block still attached to it.

*bisquik65* · 08-22-2005, 01:15 PM

Mine be a big block 454

I have a 80 burb 3/4 4x4 that is now a pickup with a 9 foot flatbed,454/400/205 1 ton with dana 60 and 14 bolt rears,4.10 gears and am using a 1/2 85 brake booster...I just hauled in a load,total weight of truck,trailer and cars...14,300 lbs. and the small booster just wont get it done here in the mountains...I am getting it piece by piece..Thanks,Erick

08-21-2005, 09:51 PM	#1
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	1982 GMC Hydro-Boost Core Anyone have a need for this? It was from a 1982 1-ton dually Camper Special with a 454/T400 411 rear gears... It is a core, been sitting for a while and I am sure it will need to be R/R'd! Worth? Best offer takes it! Attached Images __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

08-21-2005, 10:21 PM	#2
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	1st take the master cylinder off,so its will fit in a smaller box.. And i would give you $35 shipped ? to 28705 Let me know,Interested...i could use that...Thanks,Erick Last edited by bisquik65; 08-21-2005 at 10:22 PM.

08-21-2005, 10:31 PM	#3
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	I dont know the shipping costs to you; I Use UPS... www.ups.com ground to you by weight, box size, and zip code destination charges __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

08-21-2005, 10:45 PM	#5
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	Ok, well send that to me! If the costs exceed reasonability, I will contact you first before shipping it! SOLD! __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

08-21-2005, 11:16 PM	#7
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	For some reason I cant connect very fast right now, and I didnt see the PM...I will look a little later after I return from some eats! Ciao! __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

08-21-2005, 10:38 PM	#4
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	I would say,about 15 lbs without the master cyl,14 inches long,8 wide 8 high and my zip is 28705..

08-21-2005, 10:55 PM	#6
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Pm sent...with info

08-22-2005, 01:10 AM	#8
1FaastC10 Account Suspended Join Date: Oct 2002 Location: Elkhart, IN Posts: 6,399	too bad i didnt see this yesterday, i just threw away a good set of lines for an o ring hydroboost setup. if someone is interested in a hydroboost pump (with 2 return fittings) i believe i've got one laying around, might even have a set of brackets for a small block still attached to it.

08-22-2005, 01:15 PM	#9
bisquik65 Account Suspended Join Date: Apr 2004 Location: N.C. high country Posts: 6,107	Mine be a big block 454 I have a 80 burb 3/4 4x4 that is now a pickup with a 9 foot flatbed,454/400/205 1 ton with dana 60 and 14 bolt rears,4.10 gears and am using a 1/2 85 brake booster...I just hauled in a load,total weight of truck,trailer and cars...14,300 lbs. and the small booster just wont get it done here in the mountains...I am getting it piece by piece..Thanks,Erick



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.