1972 VIN Frame Location - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**RPOZ11** · 09-18-2005, 07:50 PM

Never really tried to locate this before. I knew it was somewhere, but it wasn't until I removed my cab off of the frame that I finally located it!
You will see in my image below that it is located under the cab on the top of the frame before the rear cab mount.
All that was stamped was the : 2SXXXXXX The year, Plant build initial (I assume!) and the last 6 digits of the VIN...
I am unsure on other years here from 67-71 but this is where mine is located on my 1972!
Hope this helps someone!

**RPOZ11** · 09-18-2005, 07:52 PM

Besides the Frame location and the metal VIN plate riveted on the door jamb, is there a stamped VIN on any of our Cabs?
My Camaros have them stamped on the firewall inside of the heater core cover.
I have yet to find one on the cab on these trucks...Anyone?

RicksTrucks · 09-18-2005, 08:17 PM

Don't know of any on the cab. My 68 has it stamped on the top of the frame, on the driver's side, between the motor mounts and the steering box.

4tiresngas · 09-18-2005, 08:24 PM

My 69 has it stamped the same place RicksTrucks mentioned.

gonebad2 · 09-18-2005, 08:33 PM

My 67 is stamped on the frame under the cab on the drivers side as well as on the frame by the steering box. It was made at the Fremont plant if that makes a difference.

**hilljob26** · 09-18-2005, 08:35 PM

my 72 has it the same (on the front by the steering box,it took me awhile to find it,i had to have mine inspected and had to have 2 vin #'s and thats the only way i could get it tagged.you might check there as well

**RPOZ11** · 09-18-2005, 08:50 PM

Quote:

Originally Posted by hilljob26

my 72 has it the same (on the front by the steering box,it took me awhile to find it,i had to have mine inspected and had to have 2 vin #'s and thats the only way i could get it tagged.you might check there as well

HillJob26...You are right!
I found the VIN stamped there on the top of the frame under the power steering lines!
Thanx!!

Longhorn Man · 09-20-2005, 02:21 PM

I have always been told that they all had numbers in both locations, however, there was word on here a few years ago of 67's not having ANY numbers????

09-18-2005, 07:50 PM	#1
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	1972 VIN Frame Location Never really tried to locate this before. I knew it was somewhere, but it wasn't until I removed my cab off of the frame that I finally located it! You will see in my image below that it is located under the cab on the top of the frame before the rear cab mount. All that was stamped was the : 2SXXXXXX The year, Plant build initial (I assume!) and the last 6 digits of the VIN... I am unsure on other years here from 67-71 but this is where mine is located on my 1972! Hope this helps someone! Attached Images __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

09-18-2005, 07:52 PM	#2
RPOZ11 72 BB C30 Super LongHorn Join Date: Nov 2002 Location: Chavez Ravine Posts: 1,606	VIN locations... Besides the Frame location and the metal VIN plate riveted on the door jamb, is there a stamped VIN on any of our Cabs? My Camaros have them stamped on the firewall inside of the heater core cover. I have yet to find one on the cab on these trucks...Anyone? __________________ 72 BB C/30 Longhorn Super HO72 No-Spin, #'s matching, Tilt, Tach, AC, AM/FM HO72 build : http://67-72chevytrucks.com/vboard/s...d.php?t=714492 2017 SS

09-18-2005, 08:17 PM	#3
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,640	Don't know of any on the cab. My 68 has it stamped on the top of the frame, on the driver's side, between the motor mounts and the steering box. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

09-18-2005, 08:24 PM	#4
4tiresngas An American Soldier Join Date: Feb 2005 Location: Grumolo D' Abadessee, Italy Posts: 503	My 69 has it stamped the same place RicksTrucks mentioned. __________________ Dan dan.brue@us.army.mil

09-18-2005, 08:33 PM	#5
gonebad2 Merciless Butcher Join Date: Oct 2003 Location: CC Nevada Posts: 1,447	My 67 is stamped on the frame under the cab on the drivers side as well as on the frame by the steering box. It was made at the Fremont plant if that makes a difference. __________________ Your Bought And Sold....I Got Your Soul!

09-18-2005, 08:35 PM	#6
hilljob26 Registered User Join Date: Dec 2004 Location: Gypsum Kansas 67448 Posts: 1,681	my 72 has it the same (on the front by the steering box,it took me awhile to find it,i had to have mine inspected and had to have 2 vin #'s and thats the only way i could get it tagged.you might check there as well __________________ 21 2500hd duramax 58 apache HILLJOB GRAPHIX--for all your graphic needs My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=542497 LS ENGINE SWAP INFORMATION THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=377348 4l60 to an NP205 http://67-72chevytrucks.com/vboard/s...43#post3697343

09-20-2005, 02:21 PM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	I have always been told that they all had numbers in both locations, however, there was word on here a few years ago of 67's not having ANY numbers????



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.