Bucket seat track disassembly? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

burbman69 · 09-30-2005, 09:27 PM

Do the bucket seat sliders come apart for service? I am cleaning and painting the seat track and I can't seem to get the sliders apart. anyone know how?
thanks

86swb · 09-30-2005, 10:35 PM

ttt

86swb · 10-01-2005, 09:25 AM

Sorry, I guess no one really knows. If they did you would have gotton an answer. You do not get ignored on here. If someone knows an answer to a question you ask they will answer you. Hope you here from someone who might know. I do not know the answer to your question. Maby they do not come apart. If still no answer, just paint and grease. That is what I would do.

burbman69 · 10-01-2005, 10:11 AM

Thanks for your reply and I always appreciate the input from the board. I know that I am not being ignored. Iam down to two choices Dynamite or leave it alone and grease. maybe ill leave it alone!

Thanks

junkyardjohn · 10-01-2005, 11:34 AM

I USUALLY JUST SPRAY THEM OUT GOOD WITH CARB. CLEANER OR BRAKE CLEANER & RELUBE THEM WITH SOME AROSAL WHITE LITHIUM GREASE AFTER I PIANT THEM. IT'S BEEN AWHILE , BUT IT SEEMS TO ME THAT THERE IS A COUPLE OF RIVITS HOLDING THEM TOGETHER. SORRY ABOUT NOT RESPONDING SOONER, BUT I TRY NOT TO SEEM LIKE A KNOW IT ALL, & GIVE OTHER PEOPLE A CHANCE TO ANSWER. (UNLESS THEY ARE HANDING OUT SOME BUNK ADVICE.

JOHN

burbman69 · 10-01-2005, 11:50 AM

Thanks for your reply John. It looks like the rivets would have to be ground off to get the rollers out as they are not the POP rivet type. I think I will take your advice and clean paint and relube. Thanks again for the reply!

farside847 · 10-03-2005, 12:05 PM

My sliders were from a 69 style bucket seat, they are held together by rivits that would need to be drilled out to take apart. So, I kept mine in one piece, cleaned them up, and lubed it up good with grease.

09-30-2005, 09:27 PM	#1
burbman69 Registered User Join Date: Feb 2005 Location: MOORESVILLE,NC Posts: 8	Bucket seat track disassembly? Do the bucket seat sliders come apart for service? I am cleaning and painting the seat track and I can't seem to get the sliders apart. anyone know how? thanks __________________ If it's worth doing it's worth overdoing! 1969 1/2 ton Suburban 1970 C/20 NEW PROJECT!

09-30-2005, 10:35 PM	#2
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	ttt __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

10-01-2005, 09:25 AM	#3
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Sorry, I guess no one really knows. If they did you would have gotton an answer. You do not get ignored on here. If someone knows an answer to a question you ask they will answer you. Hope you here from someone who might know. I do not know the answer to your question. Maby they do not come apart. If still no answer, just paint and grease. That is what I would do. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS Last edited by 86swb; 10-01-2005 at 09:26 AM.

10-01-2005, 10:11 AM	#4
burbman69 Registered User Join Date: Feb 2005 Location: MOORESVILLE,NC Posts: 8	Thanks for your reply and I always appreciate the input from the board. I know that I am not being ignored. Iam down to two choices Dynamite or leave it alone and grease. maybe ill leave it alone! Thanks __________________ If it's worth doing it's worth overdoing! 1969 1/2 ton Suburban 1970 C/20 NEW PROJECT!

10-01-2005, 11:34 AM	#5
junkyardjohn Registered User Join Date: Aug 2001 Location: SOMERSET KY. Posts: 6,425	I USUALLY JUST SPRAY THEM OUT GOOD WITH CARB. CLEANER OR BRAKE CLEANER & RELUBE THEM WITH SOME AROSAL WHITE LITHIUM GREASE AFTER I PIANT THEM. IT'S BEEN AWHILE , BUT IT SEEMS TO ME THAT THERE IS A COUPLE OF RIVITS HOLDING THEM TOGETHER. SORRY ABOUT NOT RESPONDING SOONER, BUT I TRY NOT TO SEEM LIKE A KNOW IT ALL, & GIVE OTHER PEOPLE A CHANCE TO ANSWER. (UNLESS THEY ARE HANDING OUT SOME BUNK ADVICE. JOHN __________________ junkyardjohn 69 1 TON TOW TRUCK // 84 4WD CUCV BLAZER// 85 1 TON 4WD STAKE TRUCK// 86 M1031 5/4 TON 4WD CUCV// ALOT OF OLD TRUCKS FOR ONE OLD MAN TO DRIVE. THERES ROOM FOR ALL OF GODS CREATURES RIGHT NEXT TO MY MASHED POTATOES// LIFE MEMBER OF P.E.T.A (PEOPLE EATING TASTY ANIMALS) DON'T RENT U-HAUL ALWAYS TELL THE TRUTH IT WILL AMAZE PART OF THE PEOPLE & ASTONISH THE REST

10-01-2005, 11:50 AM	#6
burbman69 Registered User Join Date: Feb 2005 Location: MOORESVILLE,NC Posts: 8	Thanks for your reply John. It looks like the rivets would have to be ground off to get the rollers out as they are not the POP rivet type. I think I will take your advice and clean paint and relube. Thanks again for the reply! __________________ If it's worth doing it's worth overdoing! 1969 1/2 ton Suburban 1970 C/20 NEW PROJECT!

10-03-2005, 12:05 PM	#7
farside847 Registered User Join Date: Feb 2005 Location: Bay Area, California Posts: 995	My sliders were from a 69 style bucket seat, they are held together by rivits that would need to be drilled out to take apart. So, I kept mine in one piece, cleaned them up, and lubed it up good with grease. __________________ 1971 Chevy C10 Shortbed Stepside, 307v8 3-on-the-tree



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.