|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
10-05-2005, 10:35 PM
|
#1 |
|
Senior Member
 Join Date: Mar 2001
Location: Cedar Park, TX
Posts: 686
|
OEM/STOCK hi-press power steering hose part number needed.
Folks, I have installed a ramjet-350 w/serpentine belt system...have tried a couple different AC_Delco power steering hoses and nothing is aligning up correctly. This is a 71 2wd swb...
I am asking if anyone has a good part number that they have tried and it works. This serpentine system puts the P/S pump in almost the same position as the stock v-grove system. FYI: I am using the original type of fittings (inverted flare, not the newer saginaw metric type) If anyone has pics, that would be even better. If I cant find a suitable replacement, will end up have some made, but...would much prefer an off the shelf part. THANX in advance
__________________
71 Chevy C-10 SWB Fleetside RamJet-350/4L60e & Compushift/3.73Posi See it at www.prismnet.com/~grzanich Last edited by BubbaGreen; 10-05-2005 at 10:36 PM. |
|
|
|
10-06-2005, 12:06 AM
|
#2 |
|
Watch out for your cornhole !
Join Date: Jun 2003
Location: Azle, Texas
Posts: 14,162
|
I don't understand why you can't use the stock hose if the pump is in pretty much the same as stock position, and you're using the stock flare type of fittings.
__________________
I'm on the Instagram- @Gearhead_Kevin |
|
|
|
|
10-06-2005, 09:37 AM
|
#3 |
|
Senior Member
Join Date: Mar 2001
Location: Cedar Park, TX
Posts: 686
|
I did try a stock hose and the bends dont line up properly, ACDelco part.
The ends of the hose are correct.
__________________
71 Chevy C-10 SWB Fleetside RamJet-350/4L60e & Compushift/3.73Posi See it at www.prismnet.com/~grzanich |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
