|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
10-12-2005, 10:53 AM
|
#1 |
|
JMR Offroad
Join Date: Mar 2003
Location: Oregon
Posts: 85
|
64 stepside bed wood help
The 64 shortbed stepside I'm working on was missing the under-bed supports for the wood to bolt to. I've gotten new ones and need some dimensions on where to put them in. Can someone get me some dimensions from the tailgate area forward on where these should be located?
|
|
|
|
10-13-2005, 01:17 PM
|
#2 |
|
Truck Parts Mfg.
 
Join Date: Jul 2005
Location: Oklahoma City, OK
Posts: 697
|
Cross Sill locations
There are three cross sills and two reinforcing strips. They will align with holes in the angle strips, measured forward from the rear end of the wood as follows. Cross sill at 17 5/8", reinforcing strip at 32 3/4", reinforcing strip at 52 3/8", cross sill at 63 3/8", Cross sill at 74 3/4". If you find these dimensions slightly different than your angle strips, use your existing hole locations. Be sure the cross sills have the 1" riser welded on them to support them at the right height.
Mar-Ktech
__________________
GET MAR-K Quality! Restoration and Custom Pickup Parts for Chevy, GMC, Ford, Dodge and Custom Trucks |
|
|
|
|
10-13-2005, 06:33 PM
|
#3 |
|
JMR Offroad
Join Date: Mar 2003
Location: Oregon
Posts: 85
|
Sweet, thanks for the info.
|
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
