![]() |
|
![]() |
#1 |
Registered User
Join Date: Sep 2005
Location: colorado
Posts: 24
|
Wilwood brakes
I have the chance to buy a set of wilwood rotors and 4-piston calipers front and rear. Fronts are 13' and the rear's are 11'' They are 5 on 5 bolt pattern. The question is I want to put these on my 69'.. Front and rear drums currently. I would like to do the fronts first and worry about thr rears later. Would these work with a kit from ECE or something similiar minus the rotors/calipers? What else would I need. He only wants $550 for everything so that's why this came up..
|
![]() |
![]() |
![]() |
#2 |
Account Suspended
Join Date: Nov 2004
Location: Deer Park, Tx.
Posts: 2,524
|
Change out your ball joints to 73-87 style and outer tie rods I believe. Someone may correct me here and then you can add the disc brake spindles from 73-87 as well and install your disc brakes.
|
![]() |
![]() |
![]() |
#3 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,858
|
You are wanting to lower with ECE drop spindles?These spindles are mimmicks of factory(71/72) w/the spindle relocated.So they take stock 71/72 brakes.If the Wilwoods are designed for these trucks they`ll bolt on.Are these caliper/rotor sets?What vehicle are these brakes intended for?That`s where we need to start.
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
Bookmarks |
|
|