Anniversery Model? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

6T8 · 10-14-2005, 02:08 PM

Wondering if 68 I just picked up for parts is anniversery model? Vin starts out CS148Z . Has the gold color paint underneath. Was repainted white. 6cyl stick. Glovebox is missing. Bought it for front clip. Lucked out rust free Az cab frame longbed and front clip. Any info appreciated

Thanks........Rick ps pic's this weekend

LUV2XCLR8 · 10-14-2005, 04:24 PM

Need to look at the glovebox options to be sure

More info in this thread - http://207.44.196.117/vboard/showthread.php3?t=176422

Longhorn Man · 10-14-2005, 04:40 PM

what does the seat look like? What about the steering wheel and dash pad and visors?
The VIN won't tell you anything like that.

stllookn · 10-14-2005, 05:51 PM

Might check to see if the build sheet is in the seat...that will tell you. If the lower section of the fenders and doors are white and the upper portion is gold then it could well be an Anniversary truck. Check my avatar.

**special-K** · 10-15-2005, 09:18 AM

Check all that out.Gold/White paint was in the color line-up for all models.Here`s a non-50th`68:

6T8 · 10-15-2005, 12:15 PM

Seats are long gone and cab is full of cholla cactus, Added bonus truck tilt / with correct steering wheel. Thanks for the info, I'll post any new developments.Rick

stllookn · 10-16-2005, 02:23 AM

Special K, That is a great looking 50th color scheme...even if it is not a true 50th...someone did a great job on that one. Thanks for the pic...it is motivation for me.

**special-K** · 10-16-2005, 08:14 AM

Hey Rick,I believe that tilt is probably not original to that truck.They were introduced in`69 and were black.This was when they changed the steering wheels,too.Is your wheel a 3-spoke/round horn button?

Longhorn Man · 10-16-2005, 10:43 AM

special k...while it isn't documented.. the tilt did in fact start in 68. Most likely it was for late 68 build dates, but I have seen a few option sheets and build sheets on 68's that included it.

6T8 · 10-16-2005, 01:55 PM

Not the original steering column. This is black automatic column. Originally a 3speed. Later 69-72 wheel also. Thanks for info......Rick

10-14-2005, 02:08 PM	#1
6T8 Active Member Join Date: Dec 2004 Location: Tucson, AZ Posts: 233	Anniversery Model? Wondering if 68 I just picked up for parts is anniversery model? Vin starts out CS148Z . Has the gold color paint underneath. Was repainted white. 6cyl stick. Glovebox is missing. Bought it for front clip. Lucked out rust free Az cab frame longbed and front clip. Any info appreciated Thanks........Rick ps pic's this weekend

10-14-2005, 04:24 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Need to look at the glovebox options to be sure More info in this thread - http://207.44.196.117/vboard/showthread.php3?t=176422 __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

10-14-2005, 05:51 PM	#4
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Might check to see if the build sheet is in the seat...that will tell you. If the lower section of the fenders and doors are white and the upper portion is gold then it could well be an Anniversary truck. Check my avatar. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

10-15-2005, 09:18 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Check all that out.Gold/White paint was in the color line-up for all models.Here`s a non-50th`68: __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-16-2005, 02:23 AM	#7
stllookn Saving 1 truck at a time! Join Date: Aug 2001 Location: Kent, WA Posts: 6,465	Re: Anniversery Model? Special K, That is a great looking 50th color scheme...even if it is not a true 50th...someone did a great job on that one. Thanks for the pic...it is motivation for me. __________________ '68 C20 Longhorn 50th Anniversary 400/TH400 '68 C20 Longhorn 50th Anniversary 468/TH400w/buckets '72 C20 Halfhorn (Longhorn w/o cab and front clip) '69 Flxible Cruiser (look up ugly in the dictionary)

10-14-2005, 04:40 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	what does the seat look like? What about the steering wheel and dash pad and visors? The VIN won't tell you anything like that.

10-15-2005, 12:15 PM	#6
6T8 Active Member Join Date: Dec 2004 Location: Tucson, AZ Posts: 233	Seats are long gone and cab is full of cholla cactus, Added bonus truck tilt / with correct steering wheel. Thanks for the info, I'll post any new developments.Rick

10-16-2005, 08:14 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: Anniversery Model? Hey Rick,I believe that tilt is probably not original to that truck.They were introduced in`69 and were black.This was when they changed the steering wheels,too.Is your wheel a 3-spoke/round horn button? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-16-2005, 10:43 AM	#9
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: Anniversery Model? special k...while it isn't documented.. the tilt did in fact start in 68. Most likely it was for late 68 build dates, but I have seen a few option sheets and build sheets on 68's that included it.

10-16-2005, 01:55 PM	#10
6T8 Active Member Join Date: Dec 2004 Location: Tucson, AZ Posts: 233	Re: Anniversery Model? Not the original steering column. This is black automatic column. Originally a 3speed. Later 69-72 wheel also. Thanks for info......Rick



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.