![]() |
|
![]() |
#1 |
Registered User
Join Date: Dec 2003
Location: here
Posts: 5,789
|
spindle flip?!?!
I was talking to some guy last night & we were talking about my 2 trucks. I told him I had drop spindles & springs on my 84 & just springs on my 69 because I didnt want to have to change my 6 bolt wheels. He started in on how in the "old days" they used to flip the drum brake spindles over & swap them side to side. I told him that couldnt be done because the ball joints were different sizes & it just wont work. He SWORE it worked, so I just spaced it off & let him talk. Am I full of crap or was he?...corn
|
![]() |
![]() |
![]() |
#2 |
I am a Referee of life.
Join Date: Jun 2000
Location: Greensboro N.C.
Posts: 13,993
|
Re: spindle flip?!?!
I can see it working.That's because they used to use kingpins on a straight axle.I think the ball joints and clearance would both cause problems on the trucks.The crossmember would be about where your tie rod needs to be.I wish someone would come up with a bolt on style R&P unit for our trucks.I get the we used to thing a lot but usually if you get to talking to the person they haven't in years or they only heard that's what was being done.
__________________
The 47-present Chevrolet and GMC Truck Message Board Network,it's owners,moderators,members,and associates of any type should not be held responsible for my opinion. You can't fix stupid,not even with duct tape. "My appearance is due to the fact that "GOD" does punish you for having too much fun!" Barrett-Jackson has perfected alchemy,they make rust into gold! "You can lead a horse to water but you can't saddle a duck" "Cleverly disguised as a 'Responsible Adult' "Sometimes your Knight in shining armor is just a retard in tinfoil" Last edited by PanelDeland; 10-23-2005 at 03:07 PM. |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Jan 2003
Location: daytonabeach
Posts: 22,956
|
Re: spindle flip?!?!
yeah what he said we did that on the old ford axels
__________________
71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Dec 2003
Location: here
Posts: 5,789
|
Re: spindle flip?!?!
Maybe thats what he was talking about. I took it he meant on the 67-72 trucks. Too bad it wouldnt work. Id like to have the drop in the spindle & keep the 6 bolt drums. Thanks guys...corn
|
![]() |
![]() |
![]() |
Bookmarks |
|
|