Heads up, will be parting a 71 burb - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**too much stuff** · 10-23-2005, 07:57 PM

I will probably part this one out, but it won't happen quick. ( its hunting season ya know) If you see something of interest, ask and i will post a price. Someone from calif. (i think) was looking for the upper trim, so they can have first option on that. A few smaller pieces are spoken for also. 1/2 ton 2wd. I will probably keep the posi, and engine and tranny are gone. Body panels are about shot, rear interior panels i am hanging onto also for now.

mkundo · 10-23-2005, 11:47 PM

I would like to have the two (2) front seat swirl mounts that bolt the buckets
to the floor.
Thanks MK

Tobasko · 10-24-2005, 05:45 AM

Hello,

I like the overriders and the taillights. If they r in good shape.. And if ur willing to ship to the Netherlands (europe)

**Hart_Rod** · 10-24-2005, 10:10 AM

How good is the liftgate? Roofrack? and how much?

Rob

**too much stuff** · 10-24-2005, 10:45 AM

Let me check these parts out and see what condition they are in.

tobasko, what are the overriders?

The liftgate has rust. i think the roof rack had a slight bend in one rail.

I bought this one a week ago and only had time to dump it off at storage and snap a few pics. That is why i have to look it over again and let you guys know. Eric

earl87gta · 10-24-2005, 11:41 AM

Put me in line for the front seats uper trim and rear pannel trim.
Thanks Earl

qksilver · 10-24-2005, 12:41 PM

Looks good.............I would be interested in the chrome below the glass and the roof rack ....,,,,,,,shipped! It was a nice ride the last time but way to far north for a southern boy!
Thanks,
Steve

**too much stuff** · 10-24-2005, 02:58 PM

The guy from calif. contacted me and will get first dibs on the upper chrome.
Steve, c'mon back. Just make sure you have more room this time.
I will look it over in the next couple days.

Tobasko · 10-24-2005, 04:28 PM

TMS, I ment the bumper guards...

396 SS · 10-24-2005, 07:15 PM

I am looking for rear door panels ,That are not rusty and what would it cost to ship the back seat to Oklahoma 74932

mkundo · 10-24-2005, 07:19 PM

Heads Up,
I have sent you an PM with information on parts needed.
Thanks MK

Paul72 · 10-25-2005, 06:53 PM

Eric,

What shape is the inner & outer grill in?

What the price on those?

Thanks!

Paul

**too much stuff** · 10-27-2005, 12:15 AM

I took some pics today. I will post them with some prices in the morning.

shelby987 · 10-29-2005, 11:15 AM

What price are you looking for for the dash and the heater control? What gauges does the dash have? Is the heater control non A/C?.
Would like to be first in line if the price is right, thanks!

**too much stuff** · 10-29-2005, 08:35 PM

Shelby, The dash has the 5 gauges, (no tach) I think there was a little surface rust on a gauge or two.$25 It also has a non a/c control in it. If all the arms are good, $25 plus shipping on both. I will be gone for a week but i can look them over when i get back if you want. Eric

**70STOVEBOLT** · 10-31-2005, 02:40 PM

How about the steering wheel? What shape, how much, and how much to ship to 46562 (IN)?

**too much stuff** · 11-04-2005, 11:28 PM

70stovebolt. The steering wheel is pretty rough.

**70STOVEBOLT** · 11-05-2005, 08:10 AM

Ok, thanks anyway.

bud45 · 11-05-2005, 09:37 AM

If it has coil suspension, what does it look like? Are the coils really depressed or are they still standing up pretty good?How much to Satsuma, AL 36572? E-mail me at: bud45@bellsouth.net

**too much stuff** · 11-05-2005, 11:44 AM

Bud,It has been parked on the edge of a swamp since 92. I can look, but i would think you could find better closer to home. Let me know if you want me to look. Eric

bud45 · 11-11-2005, 01:38 AM

Eric, if it's been there that long, then it may not be worth the trouble; thanks for the heads-up! Bud

Tobasko · 11-11-2005, 03:43 AM

Sorry for late reply...
The bumper guards look 2 rough 4 me.. And shipping only the taillights is not really a great idea (extra costs).

Thank you anyway.

*Don Loverink* · 11-16-2005, 12:38 AM

How much for the steering column Too Much??

**too much stuff** · 11-16-2005, 12:49 AM

Don, $60 if you want to come and pull it...

10-23-2005, 07:57 PM	#1
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,795	Heads up, will be parting a 71 burb I will probably part this one out, but it won't happen quick. ( its hunting season ya know) If you see something of interest, ask and i will post a price. Someone from calif. (i think) was looking for the upper trim, so they can have first option on that. A few smaller pieces are spoken for also. 1/2 ton 2wd. I will probably keep the posi, and engine and tranny are gone. Body panels are about shot, rear interior panels i am hanging onto also for now. Attached Images __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-23-2005, 11:47 PM	#2
mkundo Registered User Join Date: Feb 2004 Location: Ca. Posts: 366	Re: Heads up, will be parting a 71 burb I would like to have the two (2) front seat swirl mounts that bolt the buckets to the floor. Thanks MK __________________ Dan

10-24-2005, 05:45 AM	#3
Tobasko Registered User Join Date: Apr 2005 Location: The Netherlands Posts: 56	Re: Heads up, will be parting a 71 burb Hello, I like the overriders and the taillights. If they r in good shape.. And if ur willing to ship to the Netherlands (europe)

10-24-2005, 10:10 AM	#4
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Heads up, will be parting a 71 burb How good is the liftgate? Roofrack? and how much? Rob __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

10-24-2005, 10:45 AM	#5
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,795	Re: Heads up, will be parting a 71 burb Let me check these parts out and see what condition they are in. tobasko, what are the overriders? The liftgate has rust. i think the roof rack had a slight bend in one rail. I bought this one a week ago and only had time to dump it off at storage and snap a few pics. That is why i have to look it over again and let you guys know. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-24-2005, 11:41 AM	#6
earl87gta Senior Member Join Date: Dec 2003 Location: Kingsport TN Posts: 4,641	Re: Heads up, will be parting a 71 burb Put me in line for the front seats uper trim and rear pannel trim. Thanks Earl __________________ Earl 68 2500 4x4 GMC Burb

10-24-2005, 12:41 PM	#7
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Heads up, will be parting a 71 burb Looks good.............I would be interested in the chrome below the glass and the roof rack ....,,,,,,,shipped! It was a nice ride the last time but way to far north for a southern boy! Thanks, Steve

10-24-2005, 02:58 PM	#8
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,795	Re: Heads up, will be parting a 71 burb The guy from calif. contacted me and will get first dibs on the upper chrome. Steve, c'mon back. Just make sure you have more room this time. I will look it over in the next couple days. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-24-2005, 04:28 PM	#9
Tobasko Registered User Join Date: Apr 2005 Location: The Netherlands Posts: 56	Re: Heads up, will be parting a 71 burb TMS, I ment the bumper guards...

10-24-2005, 07:15 PM	#10
396 SS Registered User Join Date: Feb 2005 Location: Cameron, Ok. Posts: 112	Re: Heads up, will be parting a 71 burb I am looking for rear door panels ,That are not rusty and what would it cost to ship the back seat to Oklahoma 74932

10-24-2005, 07:19 PM	#11
mkundo Registered User Join Date: Feb 2004 Location: Ca. Posts: 366	Re: Heads up, will be parting a 71 burb Heads Up, I have sent you an PM with information on parts needed. Thanks MK __________________ Dan

10-25-2005, 06:53 PM	#12
Paul72 Registered User Join Date: Sep 2003 Location: Waterloo, IA Posts: 1,147	Re: Heads up, will be parting a 71 burb Eric, What shape is the inner & outer grill in? What the price on those? Thanks! Paul __________________ '72 Chevy K20 - 383/4sp/205 - SOLD after 41 years in the family Next project - K/5 Tahoe (71 Blazer on 99 Tahoe chassis) Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=789958

10-27-2005, 12:15 AM	#13
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,795	Re: Heads up, will be parting a 71 burb I took some pics today. I will post them with some prices in the morning. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

10-29-2005, 11:15 AM	#14
shelby987 Registered User Join Date: Mar 2005 Location: Just outside Durham, NC Posts: 894	Re: Heads up, will be parting a 71 burb What price are you looking for for the dash and the heater control? What gauges does the dash have? Is the heater control non A/C?. Would like to be first in line if the price is right, thanks!

10-29-2005, 08:35 PM	#15
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,795	Re: Heads up, will be parting a 71 burb Shelby, The dash has the 5 gauges, (no tach) I think there was a little surface rust on a gauge or two.$25 It also has a non a/c control in it. If all the arms are good, $25 plus shipping on both. I will be gone for a week but i can look them over when i get back if you want. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto



Register or Log In To remove these advertisements.

10-31-2005, 02:40 PM	#16
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,429	Re: Heads up, will be parting a 71 burb How about the steering wheel? What shape, how much, and how much to ship to 46562 (IN)?

11-04-2005, 11:28 PM	#17
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,795	Re: Heads up, will be parting a 71 burb 70stovebolt. The steering wheel is pretty rough. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-05-2005, 08:10 AM	#18
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,429	Re: Heads up, will be parting a 71 burb Ok, thanks anyway.

11-05-2005, 09:37 AM	#19
bud45 Registered User Join Date: Nov 2004 Location: Satsuma, AL Posts: 72	Re: Heads up, will be parting a 71 burb If it has coil suspension, what does it look like? Are the coils really depressed or are they still standing up pretty good?How much to Satsuma, AL 36572? E-mail me at: bud45@bellsouth.net

11-05-2005, 11:44 AM	#20
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,795	Re: Heads up, will be parting a 71 burb Bud,It has been parked on the edge of a swamp since 92. I can look, but i would think you could find better closer to home. Let me know if you want me to look. Eric __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

11-11-2005, 01:38 AM	#21
bud45 Registered User Join Date: Nov 2004 Location: Satsuma, AL Posts: 72	Re: Heads up, will be parting a 71 burb Eric, if it's been there that long, then it may not be worth the trouble; thanks for the heads-up! Bud

11-11-2005, 03:43 AM	#22
Tobasko Registered User Join Date: Apr 2005 Location: The Netherlands Posts: 56	Re: Heads up, will be parting a 71 burb Sorry for late reply... The bumper guards look 2 rough 4 me.. And shipping only the taillights is not really a great idea (extra costs). Thank you anyway.

11-16-2005, 12:38 AM	#23
Don Loverink Account Suspended Join Date: Dec 2003 Location: Brainerd, Minnesota Posts: 1,063	Re: Heads up, will be parting a 71 burb How much for the steering column Too Much??

11-16-2005, 12:49 AM	#24
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,795	Re: Heads up, will be parting a 71 burb Don, $60 if you want to come and pull it... __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

Register or Log In To remove these advertisements.