|
|
|
11-06-2005, 02:47 PM
|
#1 |
|
Senior Member
 
Join Date: Sep 2005
Location: NE
Posts: 363
|
Eaton info
I need some part #'s for the hub bearings and seals for my brothers Eaton.I've tryed going to the parts store with the old #'s that are on the bearings and they are
 and won't try to look they up.I also was wondering if 9/16" studs will go right into the same hole I took the 1/2" out of.I knew at one time but I've forgotten.
__________________
01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel. |
|
|
|
11-06-2005, 02:57 PM
|
#2 |
|
One of the First
Join Date: Jan 2000
Location: St. Augustine,FL.
Posts: 4,059
|
Re: Eaton info
What kind of rear end is it? HO52 or HO72. Got any pictures? I have the bearing and seal numbers (NAPA) wrote down somewhere.
|
|
|
|
|
11-06-2005, 03:03 PM
|
#3 |
|
Senior Member
Join Date: Sep 2005
Location: NE
Posts: 363
|
Re: Eaton info
It's a h072 3rd w/ Detroit and load bolt,h072 70"wsm housing,and h052 63" hubs. They all look the same,except for the one I shaved for more ground clearance
 .
__________________
01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel. |
|
|
|
|
11-06-2005, 03:19 PM
|
#4 |
|
Account Suspended
Join Date: Oct 2004
Posts: 1,276
|
Re: Eaton info
I agree, Napa should be able to help.
|
|
|
|
|
11-06-2005, 03:48 PM
|
#5 |
|
Senior Member
Join Date: Sep 2005
Location: NE
Posts: 363
|
Re: Eaton info
Napa is where I went.Our local store sucks.
__________________
01 2500 Duramax,6spd,4x4,Not stock. Estimated 550rwhp/1100rwfp on fuel only. 03 3500 Duramax,6spd,4x4,Pac-Brake,not stock Estimated 500rwhp/1000rwfp fuel only 67 K10 in many pieces Little Brothers truck 67 K20 Cummins 12V/NV4500/205, D60/Eaton w/ Detroit,37" Xterrains,crossover steering, Future plans,Twins and lots of fuel. |
|
|
|
|
11-06-2005, 04:51 PM
|
#6 |
|
One of the First
Join Date: Jan 2000
Location: St. Augustine,FL.
Posts: 4,059
|
Re: Eaton info
Alright, I'm not at home to verify but, I had these parts boxes in my truck.
In the brake hub there is 2 sets of bearings and one seal. Seal # 28426 (NAPA) I'm not sure if this is the front wheel bearings or not. I belive its the rear  .Bearing & Race # 362-A and 368-A / KB-116302 (NAPA) Bearing & Race # 382 and 388 / KD- 11786Y (NAPA) Hope this gets it done! |
|
|
|
|
11-06-2005, 04:40 PM
|
#7 |
|
Registered User
Join Date: Jun 2004
Location: Beeville, Texas
Posts: 1,943
|
Re: Eaton info
I've heard you can also get stuff for these axles at carquest, but napa is probably cheaper.
__________________
RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck |
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
