Trans linkage update, Help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

slam33 · 07-09-2002, 10:29 PM

Ok some of you guys know that I posted a message the other day looking for a linkage piece. the one that bolts to the trans on a turbo 350. Well they must be hard to come by becuse nobody seems to have one. Well I just spent a few hours and made one out of 1/4 steel stock, ya nice and big. Here's what I need, can someone post a pic of the piece showing the square hole I have to put in this thing. I need to know the position of the square, as they are usually tilted off center. Or can someone tell me the position of this piece when the trans is in park, I should be able to figure it out that way too.

Thanks guys

slam33 · 07-09-2002, 10:32 PM

Here's the pic I forgot to post

slam33 · 07-10-2002, 10:42 AM

Anyone? Just tell me what position the piece is in when the trans is in park. Front tab at 9 o'clock, 10, 11. Help me out here

7069684X4 · 07-10-2002, 11:08 AM

I'm at work, If no help by the time I get home then I'crawl under mine and look for ya.

slam33 · 07-10-2002, 11:17 AM

Thanks 7069684X4

slam33 · 07-10-2002, 10:02 PM

ttt

6869704X4 · 07-10-2002, 10:10 PM

OK, with the trannie in park the top of the bracket is angled toward the back of the trannie about 10 degrees.

slam33 · 07-10-2002, 10:13 PM

Thanks 6869704X4, that should get me there

HEAVY CHEVY · 07-10-2002, 11:10 PM

Slam33 I posted on the other one so I'll make this one short.
That piece is VERY HARD to FIND.
I posted not too long ago for that same piece and notta.
You need to contact DESERT RAT he may have that piece you need.

slam33 · 07-11-2002, 09:14 AM

Well I have done a lot of searching and might have found 2 of them from different people. I got some call backs on other parts and they think they have them.

My thanks again to 7069684X4 for his reponse

07-09-2002, 10:29 PM	#1
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	Trans linkage update, Help Ok some of you guys know that I posted a message the other day looking for a linkage piece. the one that bolts to the trans on a turbo 350. Well they must be hard to come by becuse nobody seems to have one. Well I just spent a few hours and made one out of 1/4 steel stock, ya nice and big. Here's what I need, can someone post a pic of the piece showing the square hole I have to put in this thing. I need to know the position of the square, as they are usually tilted off center. Or can someone tell me the position of this piece when the trans is in park, I should be able to figure it out that way too. Thanks guys __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

07-09-2002, 10:32 PM	#2
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	Here's the pic I forgot to post Attached Images __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

07-10-2002, 10:42 AM	#3
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	Anyone? Just tell me what position the piece is in when the trans is in park. Front tab at 9 o'clock, 10, 11. Help me out here __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

07-10-2002, 11:17 AM	#5
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	Thanks 7069684X4 __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

07-10-2002, 10:02 PM	#6
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	ttt __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

07-10-2002, 11:08 AM	#4
7069684X4 Registered User Join Date: Jul 2002 Location: Fla Posts: 29	I'm at work, If no help by the time I get home then I'crawl under mine and look for ya.

07-10-2002, 10:10 PM	#7
6869704X4 Registered User Join Date: Jul 2002 Location: SE NM Posts: 769	OK, with the trannie in park the top of the bracket is angled toward the back of the trannie about 10 degrees. __________________ The more I learn about women, the more I love my truck.

07-10-2002, 10:13 PM	#8
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	Thanks 6869704X4, that should get me there __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

07-10-2002, 11:10 PM	#9
HEAVY CHEVY BOWTIE FOREVER Join Date: Mar 2002 Location: Sanford,N.C. 23770 Posts: 273	Slam33 I posted on the other one so I'll make this one short. That piece is VERY HARD to FIND. I posted not too long ago for that same piece and notta. You need to contact DESERT RAT he may have that piece you need. __________________ 69 C-10 SHORT FLEET BED 350 4-BOLT/400 turbo upper & lower molding 65 IMPALA 2-DR 283/POWERGLIDE 66 IMPALA 2-DR hopefully 283/350 ~ CAMELTOE ROCKS ~

07-11-2002, 09:14 AM	#10
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	Well I have done a lot of searching and might have found 2 of them from different people. I got some call backs on other parts and they think they have them. My thanks again to 7069684X4 for his reponse __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.