Pic Request - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Striker169 · 11-16-2005, 08:24 PM

Can somone show me where the bottom of the kick pannel and floor meet is suposed to look like? Mine has a gap and I really dont think that it is susposed to be there.

Striker169 · 11-17-2005, 05:54 PM

comon nobody?

**Palf70Step** · 11-17-2005, 07:50 PM

I hope this is what you are looking for. First picture is my driverside kick panel before the patch, second is after patching it. The third and forth are same thing for passenger side.

Striker169 · 11-17-2005, 08:11 PM

YEAH thats exactly what I was looking for, so did you just buy that patch pannel and then cut the bottom?

**Palf70Step** · 11-17-2005, 08:46 PM

No..I didn't own a welder then. Some one that works with my wife did it for me. He just used some flat sheet stock that he cut to fit.

Striker169 · 11-17-2005, 09:38 PM

Have you painted it yet? any of after its painted

**Palf70Step** · 11-17-2005, 10:44 PM

No pictures of them,the areas are not painted per say. They have been spayed/painted/ with eastwood rust encaspulator. I am still working on the cab, so it is not ready for paint yeat.

**N2TRUX** · 11-17-2005, 10:56 PM

Some one is a pretty good welder, eh Bill.

**Palf70Step** · 11-17-2005, 11:17 PM

Quote:

Originally Posted by N2TRUX

Some one is a pretty good welder, eh Bill.

I wish I had even half the skills that guy had with metal and welding.

Striker169 · 11-17-2005, 11:01 PM

one other question where can I get patch pannels for around the vents?

mocwon · 11-17-2005, 11:08 PM

Quote:

Originally Posted by Striker169

one other question where can I get patch pannels for around the vents?

Go by Westbrook Metals off N. Lamar near Airport Blvd. and have them cut you a piece of 16 or 18 gauge steel big enough to cover the hole. If they won't cut a piece that small go by Lowes or Home Depot and buy a cut piece there. I know they have it. Make a pattern out of cardboard then whittle out the shape you need with a jig saw or cut off wheel and weld in.

Striker169 · 11-17-2005, 11:55 PM

Quote:

Originally Posted by mocwon

Go by Westbrook Metals off N. Lamar near Airport Blvd. and have them cut you a piece of 16 or 18 gauge steel big enough to cover the hole. If they won't cut a piece that small go by Lowes or Home Depot and buy a cut piece there. I know they have it. Make a pattern out of cardboard then whittle out the shape you need with a jig saw or cut off wheel and weld in.

what about the hole for the vent and then the like bend inward? or is that another part I would have to fix? Hmmm I will try to get the truck running and then Ill bring it by and show you. Maybe that is all if I can get it working

mocwon · 11-18-2005, 01:03 PM

Quote:

Originally Posted by Striker169

what about the hole for the vent and then the like bend inward? or is that another part I would have to fix? Hmmm I will try to get the truck running and then Ill bring it by and show you. Maybe that is all if I can get it working

That could also be fabbed but a patch panel or one cut out of a donor truck would be easier.

11-16-2005, 08:24 PM	#1
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Pic Request Can somone show me where the bottom of the kick pannel and floor meet is suposed to look like? Mine has a gap and I really dont think that it is susposed to be there.

11-17-2005, 05:54 PM	#2
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Re: Pic Request comon nobody?

11-17-2005, 07:50 PM	#3
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,816	Re: Pic Request I hope this is what you are looking for. First picture is my driverside kick panel before the patch, second is after patching it. The third and forth are same thing for passenger side. Attached Images __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-17-2005, 08:11 PM	#4
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Re: Pic Request YEAH thats exactly what I was looking for, so did you just buy that patch pannel and then cut the bottom?

11-17-2005, 08:46 PM	#5
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,816	Re: Pic Request No..I didn't own a welder then. Some one that works with my wife did it for me. He just used some flat sheet stock that he cut to fit. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-17-2005, 09:38 PM	#6
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Re: Pic Request Have you painted it yet? any of after its painted

11-17-2005, 10:44 PM	#7
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,816	Re: Pic Request No pictures of them,the areas are not painted per say. They have been spayed/painted/ with eastwood rust encaspulator. I am still working on the cab, so it is not ready for paint yeat. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

11-17-2005, 10:56 PM	#8
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Pic Request Some one is a pretty good welder, eh Bill. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

11-17-2005, 11:01 PM	#10
Striker169 Car O'Holic Join Date: Jan 2005 Location: Austin, Tx. Posts: 692	Re: Pic Request one other question where can I get patch pannels for around the vents?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.