gauging interest....anyone want to trade?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC69mnypit · 11-19-2005, 11:51 AM

I need body parts (bed and cab primarily) for my '69 GMC. Located in Central Kansas.

Since I've got my LS1 setup in it, I have a garage full of powertrain stuff I don't need:

283 Chevy engine. Was in the '69 when I bought it. Dirty, but ran. Numbers on the pad said '64 chevelle 2 barrel. Someone made it a 4 barrel.

402 Chevy engine. Bought this one, haven't heard it run, but was supposed to when it was pulled 1 year ago. It is out of a '71 chevy truck. Looks to have never been opened, except by me who pulled the oilpan. 2 bolt mains, looks good on the bottom end. Have spun it over via the starter, but not fired it. I dropped the HEI in the dist. hole. Has a new ISKY roller cam that goes with it.

350 chevy engine. 4 bolt mains, forged pistons, forged crank, .030 over. I put this in the '69 in place of the 283, before the LS1. Runs, needs freshened up.

Th400 tranny. Was in the '69 when I got it. Dirty, but worked very well. Firm shifts, no pause when going into reverse. Felt very strong.

If anyone is interested in trading for some good body parts I will post some pics, if you want more info I've got it, let me know.

-Brandon

justascatch · 11-19-2005, 12:14 PM

Crank up your 02 Silverado, hook up your trailer, bring all that engine stuff and let's trade. 7 cabs, 1 good LWB, 20 other trucks in parts.

GMC69mnypit · 11-19-2005, 12:19 PM

Quote:

Crank up your 02 Silverado, hook up your trailer, bring all that engine stuff and let's trade. 7 cabs, 1 good LWB, 20 other trucks in parts.

Yeah, I know, you've got the goods. Problem is, I've got no trailer....

cableguy0 · 11-19-2005, 12:25 PM

dont let not having a trailer stop you. you can rent a trailer reasonably from u haul. give them a call you might be surprised

GMC69mnypit · 11-19-2005, 12:46 PM

Some pics... The 283 isn't very photogenic, just an old dirty pretty complete sbc. Ramhorn manifolds, fuel pump, generator, carb dist., pulleys...all there

teeitup · 11-19-2005, 01:53 PM

I've got a nice 69 cab here, doors, fenders but no beds, I'd do some trading too. Thanks Randy

LUV2XCLR8 · 11-19-2005, 02:19 PM

Man oh man I would like to have the BB

*FormerMember* · 11-19-2005, 10:53 PM

I would be interested in the ISKY BBC roller cam, as I have a 402 core here with a set of BBC roller lifters and rockers I could install...

I also have a few cabs, but they're in CA. right now.

Swbman · 11-20-2005, 12:50 AM

Brandon, got the things you are looking for. interested in 402, do you have the brackets for it. Mike

GMC69mnypit · 11-20-2005, 01:22 AM

No, sorry Mike. All the big block stuff I have is what is pictured...

The p/n of the cam didn't come through on the resize. It's 396275/284

http://www.iskycams.com/pdfcatalog/2004-05/page112.pdf#search='396275%2F284'

11-19-2005, 11:51 AM	#1
GMC69mnypit !Women...!!!! Join Date: Jan 2005 Location: South of Hays, Kansas Posts: 40	gauging interest....anyone want to trade?? I need body parts (bed and cab primarily) for my '69 GMC. Located in Central Kansas. Since I've got my LS1 setup in it, I have a garage full of powertrain stuff I don't need: 283 Chevy engine. Was in the '69 when I bought it. Dirty, but ran. Numbers on the pad said '64 chevelle 2 barrel. Someone made it a 4 barrel. 402 Chevy engine. Bought this one, haven't heard it run, but was supposed to when it was pulled 1 year ago. It is out of a '71 chevy truck. Looks to have never been opened, except by me who pulled the oilpan. 2 bolt mains, looks good on the bottom end. Have spun it over via the starter, but not fired it. I dropped the HEI in the dist. hole. Has a new ISKY roller cam that goes with it. 350 chevy engine. 4 bolt mains, forged pistons, forged crank, .030 over. I put this in the '69 in place of the 283, before the LS1. Runs, needs freshened up. Th400 tranny. Was in the '69 when I got it. Dirty, but worked very well. Firm shifts, no pause when going into reverse. Felt very strong. If anyone is interested in trading for some good body parts I will post some pics, if you want more info I've got it, let me know. -Brandon __________________ '69 GMC 1/2T LWB 2WD '02 Silverado 2500HD 4X4 '79 ElCamino SS

11-19-2005, 12:14 PM	#2
justascatch Justascratch Join Date: Jun 2004 Location: OKC, OK Posts: 160	Re: gauging interest....anyone want to trade?? Crank up your 02 Silverado, hook up your trailer, bring all that engine stuff and let's trade. 7 cabs, 1 good LWB, 20 other trucks in parts. __________________ justascratch-OKC,OK

11-19-2005, 12:25 PM	#4
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	Re: gauging interest....anyone want to trade?? dont let not having a trailer stop you. you can rent a trailer reasonably from u haul. give them a call you might be surprised __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

11-19-2005, 12:46 PM	#5
GMC69mnypit !Women...!!!! Join Date: Jan 2005 Location: South of Hays, Kansas Posts: 40	Re: gauging interest....anyone want to trade?? Some pics... The 283 isn't very photogenic, just an old dirty pretty complete sbc. Ramhorn manifolds, fuel pump, generator, carb dist., pulleys...all there __________________ '69 GMC 1/2T LWB 2WD '02 Silverado 2500HD 4X4 '79 ElCamino SS

11-19-2005, 01:53 PM	#6
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: gauging interest....anyone want to trade?? I've got a nice 69 cab here, doors, fenders but no beds, I'd do some trading too. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

11-19-2005, 02:19 PM	#7
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,468	Re: gauging interest....anyone want to trade?? Man oh man I would like to have the BB __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

11-19-2005, 10:53 PM	#8
FormerMember Account Suspended Join Date: Feb 2004 Posts: 3,051	Re: gauging interest....anyone want to trade?? I would be interested in the ISKY BBC roller cam, as I have a 402 core here with a set of BBC roller lifters and rockers I could install... I also have a few cabs, but they're in CA. right now.

11-20-2005, 12:50 AM	#9
Swbman Senior Member Join Date: Mar 2004 Location: Tulsa,Oklahoma Posts: 606	Re: gauging interest....anyone want to trade?? Brandon, got the things you are looking for. interested in 402, do you have the brackets for it. Mike

11-20-2005, 01:22 AM	#10
GMC69mnypit !Women...!!!! Join Date: Jan 2005 Location: South of Hays, Kansas Posts: 40	Re: gauging interest....anyone want to trade?? No, sorry Mike. All the big block stuff I have is what is pictured... The p/n of the cam didn't come through on the resize. It's 396275/284 http://www.iskycams.com/pdfcatalog/2004-05/page112.pdf#search='396275%2F284' __________________ '69 GMC 1/2T LWB 2WD '02 Silverado 2500HD 4X4 '79 ElCamino SS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.