Por Patch - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevyboy55 · 11-19-2005, 07:54 PM

Has anyone used pro 15's Por Patch? I sandblasted the rear window opening & have some rust holes ranging from pin holes to pencil lead sized holes. I was looking on POR's web site and saw por patch, looks interesting. Thanks, Mike

RICHARD MORGAN · 11-19-2005, 10:19 PM

I'm in the same situation. I ran across this article. you might find it helpful.

http://www.highperformancepontiac.co...306pon_shield/

Richard

**FRENCHBLUE72** · 11-20-2005, 12:21 AM

I have never used the por patch but if its anything like the por-15 it should work really well.

chevyboy55 · 11-20-2005, 12:58 AM

Thanks Richard

Solver · 11-20-2005, 01:57 AM

I have used the stuff and was very happy with the results.
Had some pin holes in a cab floor and it fixed them very well.
The stuff has the consistency of toothpaste and dries super hard.
I guess I wouldn't use it on a visible panel repair because it won't sand at all but on a lip or floor it should work great for you

cdowns · 11-20-2005, 09:13 AM

i tried out a tube of it/expensive!!!/ used it to patch a crack in an abs plastic gas tank on the mower has worked fine 2years no leak// as noted a ***** to sand for a smooth finish surface//think you'd be better off with something like evercoats metal-to-metal filler if its going to need to be smooted out for final finish

11-19-2005, 07:54 PM	#1
chevyboy55 Senior Member Join Date: Aug 2004 Location: Kelso,Wa Posts: 3,637	Por Patch Has anyone used pro 15's Por Patch? I sandblasted the rear window opening & have some rust holes ranging from pin holes to pencil lead sized holes. I was looking on POR's web site and saw por patch, looks interesting. Thanks, Mike

11-19-2005, 10:19 PM	#2
RICHARD MORGAN Registered User Join Date: Jan 2004 Location: HERNDON VA Posts: 216	Re: Por Patch I'm in the same situation. I ran across this article. you might find it helpful. http://www.highperformancepontiac.co...306pon_shield/ Richard

11-20-2005, 12:21 AM	#3
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,604	Re: Por Patch I have never used the por patch but if its anything like the por-15 it should work really well. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-20-2005, 12:58 AM	#4
chevyboy55 Senior Member Join Date: Aug 2004 Location: Kelso,Wa Posts: 3,637	Re: Por Patch Thanks Richard

11-20-2005, 01:57 AM	#5
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	Re: Por Patch I have used the stuff and was very happy with the results. Had some pin holes in a cab floor and it fixed them very well. The stuff has the consistency of toothpaste and dries super hard. I guess I wouldn't use it on a visible panel repair because it won't sand at all but on a lip or floor it should work great for you __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

11-20-2005, 09:13 AM	#6
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: Por Patch i tried out a tube of it/expensive!!!/ used it to patch a crack in an abs plastic gas tank on the mower has worked fine 2years no leak// as noted a ***** to sand for a smooth finish surface//think you'd be better off with something like evercoats metal-to-metal filler if its going to need to be smooted out for final finish __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY Last edited by cdowns; 11-20-2005 at 09:15 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.