69 coil spring longbed in spokane, wa - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GenIIIShorty · 12-06-2005, 01:35 AM

FOR sale!!! Not title, looking for about $100 out of it. 2 decent 69-72 front fenders, decent 69-72 hood, etc, etc. no grille, but has core support, i'll go take pics tomorrow, i am basically paying storage on a truck, so i want to get rid of it. no bed, has a homemade wood flatbed. 6 lug all the way around, no clue if it has a posi or not. any other questions, let me know, and i will answer them as best as possible.

LUV2XCLR8 · 12-06-2005, 07:07 PM

Welcome back, here's a TTT for ya

GenIIIShorty · 05-18-2006, 01:30 AM

ok, this one is going back to the top! gonna take pictures tomorrow after work, and should have them uploaded.

GenIIIShorty · 05-18-2006, 08:36 PM

The Pictures!

GenIIIShorty · 05-20-2006, 11:45 AM

Ttt

EFI70Blazer · 05-20-2006, 10:10 PM

How would you rate the front fenders on a 1 to 10 scale? I am looking for some with very few dents and no or little rust. Let me know. I am mostly interested in the front clip, but the price is right for the whole truck.

Thanks,
Mike

GenIIIShorty · 05-20-2006, 10:12 PM

I'll go take a good hard look at them, but i'm pretty sure there are no dents and no cancer. Maybe some surface rust, though. I'll get back to you on Monday about it.

EDIT: Just looking at the pics, there appears to be a dent on the radius on the top of the passenger side fender.

GenIIIShorty · 05-23-2006, 08:51 PM

OK, here's the deal with the fenders:
Red circle: The fender cup is completely smashed on the passanger side. Needs a new cup
Yellow circle: Rot on both fenders in this area, no other rot anywhere, including fender lips.
Green circle:Small dent in radius of curve. About 3 or 4 inches long, 1/2 to 1 inch wide, and 1/4 to 1/2 inche deep at deepest point.
Otherwise, no damage to the fenders.

EFI70Blazer · 05-24-2006, 06:33 AM

Found some good fenders this weekend locally. Think i am going to pass on the truck, but TTT for ya.

GenIIIShorty · 05-24-2006, 10:21 PM

She's headed for the junkyard..........

Americanrider · 05-24-2006, 10:44 PM

What shape are the doors in? I can see the dent in the drivers but mainly concered w/ rusted bottoms.

thecatseye66 · 05-24-2006, 11:43 PM

I'll pick it up, so you don't have to tow it, but without a title, what else are you gonna do?
PM Sent

GenIIIShorty · 05-24-2006, 11:45 PM

I'll look the doors over real hard tomorrow and let you know.

GenIIIShorty · 05-24-2006, 11:48 PM

I've got a buddy with a trailer, some I'm not worried about transport. I posted it in the parts board, cuz that's all it's good for. The hood is in good shape, and it seems like the doors and fenders are fixable.

GenIIIShorty · 05-25-2006, 08:50 PM

There doesn't seem to be any rot, however, the PO cut holes in the door below the door panel for 6 1/2 inch speakers.

GenIIIShorty · 05-25-2006, 08:53 PM

Also, it's a high hump 4 spd cab, with the 4 spd. Appears to be an SM465 because it's heavily ribbed.

12-06-2005, 01:35 AM	#1
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	69 coil spring longbed in spokane, wa FOR sale!!! Not title, looking for about $100 out of it. 2 decent 69-72 front fenders, decent 69-72 hood, etc, etc. no grille, but has core support, i'll go take pics tomorrow, i am basically paying storage on a truck, so i want to get rid of it. no bed, has a homemade wood flatbed. 6 lug all the way around, no clue if it has a posi or not. any other questions, let me know, and i will answer them as best as possible. __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

12-06-2005, 07:07 PM	#2
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Re: 69 coil spring longbed in spokane, wa Welcome back, here's a TTT for ya __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

05-18-2006, 01:30 AM	#3
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	Re: 69 coil spring longbed in spokane, wa ok, this one is going back to the top! gonna take pictures tomorrow after work, and should have them uploaded. __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

05-18-2006, 08:36 PM	#4
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	Re: 69 coil spring longbed in spokane, wa The Pictures! __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

05-20-2006, 11:45 AM	#5
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	Re: 69 coil spring longbed in spokane, wa Ttt __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

05-20-2006, 10:10 PM	#6
EFI70Blazer Active Member Join Date: Apr 2006 Location: Pendleton, OR Posts: 243	Re: 69 coil spring longbed in spokane, wa How would you rate the front fenders on a 1 to 10 scale? I am looking for some with very few dents and no or little rust. Let me know. I am mostly interested in the front clip, but the price is right for the whole truck. Thanks, Mike __________________ Mike T. Oregon 70 GMC Jimmy 4x4 70 Camaro LS1 plans in the works 71 RS/SS Camaro numbers matching 86 Chevy Silverado SWB 4x4 (454 merlin heads, 3/4 running gear upgrade, Detroit lockers front and rear)

05-20-2006, 10:12 PM	#7
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	Re: 69 coil spring longbed in spokane, wa I'll go take a good hard look at them, but i'm pretty sure there are no dents and no cancer. Maybe some surface rust, though. I'll get back to you on Monday about it. EDIT: Just looking at the pics, there appears to be a dent on the radius on the top of the passenger side fender. __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3 Last edited by GenIIIShorty; 05-20-2006 at 10:13 PM.

05-23-2006, 08:51 PM	#8
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	Re: 69 coil spring longbed in spokane, wa OK, here's the deal with the fenders: Red circle: The fender cup is completely smashed on the passanger side. Needs a new cup Yellow circle: Rot on both fenders in this area, no other rot anywhere, including fender lips. Green circle:Small dent in radius of curve. About 3 or 4 inches long, 1/2 to 1 inch wide, and 1/4 to 1/2 inche deep at deepest point. Otherwise, no damage to the fenders. __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3 Last edited by GenIIIShorty; 05-24-2006 at 11:43 PM.

05-24-2006, 06:33 AM	#9
EFI70Blazer Active Member Join Date: Apr 2006 Location: Pendleton, OR Posts: 243	Re: 69 coil spring longbed in spokane, wa Found some good fenders this weekend locally. Think i am going to pass on the truck, but TTT for ya. __________________ Mike T. Oregon 70 GMC Jimmy 4x4 70 Camaro LS1 plans in the works 71 RS/SS Camaro numbers matching 86 Chevy Silverado SWB 4x4 (454 merlin heads, 3/4 running gear upgrade, Detroit lockers front and rear)

05-24-2006, 10:21 PM	#10
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	Re: 69 coil spring longbed in spokane, wa She's headed for the junkyard.......... __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

05-24-2006, 10:44 PM	#11
Americanrider Registered User Join Date: Dec 2004 Location: NW, WA. Posts: 1,421	Re: 69 coil spring longbed in spokane, wa What shape are the doors in? I can see the dent in the drivers but mainly concered w/ rusted bottoms.

05-24-2006, 11:43 PM	#12
thecatseye66 '68 C-20 396 CST CC Join Date: Mar 2005 Location: Spokane, WA Posts: 454	Re: 69 coil spring longbed in spokane, wa I'll pick it up, so you don't have to tow it, but without a title, what else are you gonna do? PM Sent __________________ 68 C-20 396/TH400 CST Custom Camper NOW W/DISC BRAKES 01 Jetta Turbo Daily Driver 84 Yamaha Virago 700 - Alaska to Florida Via Maine & Mexico

05-24-2006, 11:45 PM	#13
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	Re: 69 coil spring longbed in spokane, wa I'll look the doors over real hard tomorrow and let you know. __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

05-24-2006, 11:48 PM	#14
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	Re: 69 coil spring longbed in spokane, wa I've got a buddy with a trailer, some I'm not worried about transport. I posted it in the parts board, cuz that's all it's good for. The hood is in good shape, and it seems like the doors and fenders are fixable. __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

05-25-2006, 08:50 PM	#15
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	Re: 69 coil spring longbed in spokane, wa There doesn't seem to be any rot, however, the PO cut holes in the door below the door panel for 6 1/2 inch speakers. __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3



Register or Log In To remove these advertisements.

05-25-2006, 08:53 PM	#16
GenIIIShorty JUNK COLLECTOR!!!!! Join Date: Jan 2005 Location: Spokane, WA Posts: 514	Re: 69 coil spring longbed in spokane, wa Also, it's a high hump 4 spd cab, with the 4 spd. Appears to be an SM465 because it's heavily ribbed. __________________ baby The dark side! 2000 XLT PSD F-250 4x4! Offroad package 1970 C10 Short-step soon to be short fleet, maybe? Corvette in truck's clothing in work! Corvette IFS, IRS, TPI and Doug Nash 4+3

Register or Log In To remove these advertisements.