Gaskets for Edelbrock carb/intake? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

muddpile · 12-09-2005, 12:33 AM

I am going to be needing the gaskets for my edelbrock carb and intake swap on my 350, but am not sure what to get. The engine is an early 80's 350, the intake is a non-EGR edelbrock performer, and the carb is an edelbrock performer 600CFM. I need the gaskets for the sides, the one for under the distributor and the one for under the carb. I like Fel-Pro gaskets, but am not sure what set to get. Anyone have any model numbers or anything? Thanks!

jsbgump · 12-09-2005, 01:17 AM

just get the stock felpro gaskets for a early model sbc

**pjmoreland** · 12-09-2005, 05:01 AM

Edelbrock now sells intake manifold gaskets designed specifically for their intake manifolds. Before they started selling gaskets, they recommended using thick gaskets made by Mr. Gasket or Felpro. They recommended against using the thin blue gaskets that Felpro makes because they aren't squishy enough for the aluminum manifold.

67chevemall · 12-09-2005, 09:37 AM

Mr Gasket is the man!

wink_tim · 12-09-2005, 03:58 PM

I use a Felpro #1205 with my Edelbrock intake, just throw away the cork end strips and use a nice bead of RTV, should work just fine.

GMan69 · 12-09-2005, 10:16 PM

Use the Edelbrock #9266 divided heat insulator gasket to mount your carb.
I installed one of these on Putter's and one on mine. He has a 1406 on a Performer intake and I have a 1406 on a Performer RPM. We both had problems with hot restarts, but not now.

muddpile · 12-10-2005, 12:54 AM

So, if I order the edelbrock #9266 carb gasket and the #7201 intake gasket set, that should be all I need correct? I never use those rubber or cork front rear gaskets, as they always seem to leak. A nice thick bead of RTV seems to do as well as anything in that situation.

Winktim, is that felpro #1205 a thick gasket or thin? I've used the blue felpro thin gaskets before, but have never used the thick ones.

67chevemall · 02-02-2006, 01:45 PM

Quote:

Originally Posted by GMan69

Use the Edelbrock #9266 divided heat insulator gasket to mount your carb.
I installed one of these on Putter's and one on mine. He has a 1406 on a Performer intake and I have a 1406 on a Performer RPM. We both had problems with hot restarts, but not now.

I change my mind! This is the way to go!

70c10 · 02-02-2006, 01:56 PM

I just bought an edelbrock gasket (thick) to try under my Demon. Haven't installed yet.

muddpile · 02-03-2006, 01:17 AM

I ended up going with the Felpro Performance Intake gasket set and a 1" phenolic carb spacer with a thin gasket on top and bottom. Haven't had a chance to put it all on yet, but it looks like quality stuff.

muddpile · 12-10-2005, 02:21 AM

I assume pretty well any SBC gasket set will work, its just some likely work better with the way aluminum shape shifts.

12-09-2005, 01:17 AM	#2
jsbgump Gone Fishing Join Date: Aug 2005 Location: Fort Worth, Texas 76135 Posts: 12,361	Re: Gaskets for Edelbrock carb/intake? just get the stock felpro gaskets for a early model sbc __________________ 68 Chevy Short Fleetside LSX Swap Under Way 3.73 posi 2.5/4 drop Frame of resto has been started 2022 Hyundai Tucson Limited 2019 Chevy Traverse Redline Edition Wifes Ride Build Thread http://67-72chevytrucks.com/vboard/s...=1#post3483616

12-09-2005, 05:01 AM	#3
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,786	Re: Gaskets for Edelbrock carb/intake? Edelbrock now sells intake manifold gaskets designed specifically for their intake manifolds. Before they started selling gaskets, they recommended using thick gaskets made by Mr. Gasket or Felpro. They recommended against using the thin blue gaskets that Felpro makes because they aren't squishy enough for the aluminum manifold.

12-09-2005, 09:37 AM	#4
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: Gaskets for Edelbrock carb/intake? Mr Gasket is the man! __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

12-09-2005, 03:58 PM	#5
wink_tim Registered User Join Date: Jun 2003 Location: Rowlett, TX Posts: 120	Re: Gaskets for Edelbrock carb/intake? I use a Felpro #1205 with my Edelbrock intake, just throw away the cork end strips and use a nice bead of RTV, should work just fine. __________________ 67 SWB

12-09-2005, 10:16 PM	#6
GMan69 Registered User Join Date: Mar 2001 Location: Hernando, MS USA Posts: 1,152	Re: Gaskets for Edelbrock carb/intake? Use the Edelbrock #9266 divided heat insulator gasket to mount your carb. I installed one of these on Putter's and one on mine. He has a 1406 on a Performer intake and I have a 1406 on a Performer RPM. We both had problems with hot restarts, but not now. __________________ George Morgan Hernando, MS '69 C-10 swb fleetside '72 GMC swb Stepside Last edited by GMan69; 12-09-2005 at 10:18 PM.

12-09-2005, 12:33 AM	#1
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Gaskets for Edelbrock carb/intake? I am going to be needing the gaskets for my edelbrock carb and intake swap on my 350, but am not sure what to get. The engine is an early 80's 350, the intake is a non-EGR edelbrock performer, and the carb is an edelbrock performer 600CFM. I need the gaskets for the sides, the one for under the distributor and the one for under the carb. I like Fel-Pro gaskets, but am not sure what set to get. Anyone have any model numbers or anything? Thanks! __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

12-10-2005, 12:54 AM	#7
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Re: Gaskets for Edelbrock carb/intake? So, if I order the edelbrock #9266 carb gasket and the #7201 intake gasket set, that should be all I need correct? I never use those rubber or cork front rear gaskets, as they always seem to leak. A nice thick bead of RTV seems to do as well as anything in that situation. Winktim, is that felpro #1205 a thick gasket or thin? I've used the blue felpro thin gaskets before, but have never used the thick ones. __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open Last edited by muddpile; 12-10-2005 at 12:55 AM.

02-02-2006, 01:56 PM	#9
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: Gaskets for Edelbrock carb/intake? I just bought an edelbrock gasket (thick) to try under my Demon. Haven't installed yet. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

02-03-2006, 01:17 AM	#10
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Re: Gaskets for Edelbrock carb/intake? I ended up going with the Felpro Performance Intake gasket set and a 1" phenolic carb spacer with a thin gasket on top and bottom. Haven't had a chance to put it all on yet, but it looks like quality stuff. __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open

12-10-2005, 02:21 AM	#11
muddpile Registered User Join Date: Dec 2004 Location: Saskatchewan, Canada Posts: 1,371	Re: Gaskets for Edelbrock carb/intake? I assume pretty well any SBC gasket set will work, its just some likely work better with the way aluminum shape shifts. __________________ 1964 Chevy Short Fleet: Tornado 1972 Chevy C10: Fast Orange Secondaries Wide Open



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.