WTB: Clutch Linkage - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gennoy · 12-12-2005, 01:06 PM

Hello,

I am in need of some clutch linkage. I thought I had the right setup, but after putting it together it doesn't work. I look at my buddies 68 pickup and his clutch linkage is different than what I have. So now I am in the market for the right setup. Here is what I need:

-Rod that comes down from the pedal assembly through the firewall to the z-bar
-The z-bar itself
-Rod that goes from the z-bar to the clutch fork

This is the only thing left before taking my truck for a drive, so I would really appreciate it if someone has these parts.

Thanks!!

Rod · 12-12-2005, 03:07 PM

You best say what your exactly after....if it's 4x4 or a 2wd ...6 cylinder or eight cylinder, three speed standard on column, or 4 speed on floor. Things are different between those varieties.
Is this a mod your doing to truck to convert it to standard trans or was it standard trans to start with? If your modding one..you might not have even asked for enough.

Gennoy · 12-12-2005, 03:17 PM

It is for a 2wd with a 350 and four on the floor. I really think I have every other part. I thought I had the correct z-bar and two rods, but once I tried bolting it all up the sizes and positions of them all were incorrect. That's when I went over to my buddies house and checked out his setup and found it to be different than mine. I tried talking him out of his parts, but I guess he still likes driving his truck.

jgvallie · 12-12-2005, 05:21 PM

is it a truck four speed ? i have linkage for 68 6 cylinder four-speed let me know ?john

Gennoy · 12-12-2005, 05:23 PM

Quote:

Originally Posted by jgvallie

is it a truck four speed ? i have linkage for 68 6 cylinder four-speed let me know ?john

John, is there anyway you could send me a picture of your setup? I would know it if I saw it. Thanks!

EDIT: Nevermind, I think they are different for 6 cylinder setups. Mine is a V8 and I think it is specific to the engine. Thanks.

DR67 · 12-12-2005, 07:00 PM

I have the linkage from a v8 with three speed, really don't know if it will work

DR67

Gennoy · 12-12-2005, 08:03 PM

Quote:

Originally Posted by DR67

I have the linkage from a v8 with three speed, really don't know if it will work

DR67

PM Sent

Gennoy · 12-12-2005, 09:41 PM

Thanks Rod, that is exactly what I need. Plus I also need the bar going from the pedal assembly through the firewall down to the z-bar.

12-12-2005, 01:06 PM	#1
Gennoy Registered User Join Date: Nov 2005 Location: Antelope, CA Posts: 21	WTB: Clutch Linkage Hello, I am in need of some clutch linkage. I thought I had the right setup, but after putting it together it doesn't work. I look at my buddies 68 pickup and his clutch linkage is different than what I have. So now I am in the market for the right setup. Here is what I need: -Rod that comes down from the pedal assembly through the firewall to the z-bar -The z-bar itself -Rod that goes from the z-bar to the clutch fork This is the only thing left before taking my truck for a drive, so I would really appreciate it if someone has these parts. Thanks!! __________________ 1969 Chevrolet C-10 SWB

12-12-2005, 03:07 PM	#2
Rod Join Date: Dec 1999 Location: Eastern - Manitoba Canada, Winnipeg Posts: 4,369	Re: WTB: Clutch Linkage You best say what your exactly after....if it's 4x4 or a 2wd ...6 cylinder or eight cylinder, three speed standard on column, or 4 speed on floor. Things are different between those varieties. Is this a mod your doing to truck to convert it to standard trans or was it standard trans to start with? If your modding one..you might not have even asked for enough. __________________ Senior active founding member. 70 3/4 ton GMC Suburban 4x4 250/4 spd. 71 1/2 ton Suburban Chevy 4x4, 350/350 72 Chev 1 ton tow truck 402BB w/Holmes 440 wrecker on propane 2005 FLSTSCI Harley Springer 85 FXSB Harley Lowrider 72 Triumph 650 Bonneville 5spd "Poor people don't have hobbies" Quote from wife. Last edited by Rod; 12-12-2005 at 03:09 PM.

12-12-2005, 03:17 PM	#3
Gennoy Registered User Join Date: Nov 2005 Location: Antelope, CA Posts: 21	Re: WTB: Clutch Linkage It is for a 2wd with a 350 and four on the floor. I really think I have every other part. I thought I had the correct z-bar and two rods, but once I tried bolting it all up the sizes and positions of them all were incorrect. That's when I went over to my buddies house and checked out his setup and found it to be different than mine. I tried talking him out of his parts, but I guess he still likes driving his truck. __________________ 1969 Chevrolet C-10 SWB

12-12-2005, 05:21 PM	#4
jgvallie jgvallie Join Date: Nov 2004 Location: mid-michigan Posts: 106	Re: WTB: Clutch Linkage is it a truck four speed ? i have linkage for 68 6 cylinder four-speed let me know ?john

12-12-2005, 07:00 PM	#6
DR67 Registered User Join Date: Feb 2002 Location: Knoxville, Tn. USA Posts: 205	Re: WTB: Clutch Linkage I have the linkage from a v8 with three speed, really don't know if it will work DR67 __________________ Dave Knoxville,Tn.

12-12-2005, 09:41 PM	#8
Gennoy Registered User Join Date: Nov 2005 Location: Antelope, CA Posts: 21	Re: WTB: Clutch Linkage Thanks Rod, that is exactly what I need. Plus I also need the bar going from the pedal assembly through the firewall down to the z-bar. __________________ 1969 Chevrolet C-10 SWB



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.