Hopefully better pictures of the Sub and Panel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Classic Heartbeat** · 07-13-2002, 12:32 PM

Here is a better picture of the Sub.

**Classic Heartbeat** · 07-13-2002, 12:33 PM

Here is the Sub with one of the recipiants of the parts.

**Classic Heartbeat** · 07-13-2002, 12:46 PM

Here is the recipient of the front disk brakes, power brakes and possi rear.

*racedvl* · 07-13-2002, 11:33 PM

That poor burb.......

I wish I could find one that clean around here......

ebfabman · 07-13-2002, 11:43 PM

I see the hoods off the panel, been workin on it?

**Classic Heartbeat** · 07-14-2002, 04:00 AM

Jason, realy it isn't as clean as it looks in these pictures. It probly could be restored, but I realy need the parts for my two 67s.... The BB 402, front/rear air, power steering, front inner roof panel, drivers side A pillar, and lots of other small parts will go into my panel..... The front disk brake crossmember, power brakes, possi and possi rear end will go into the 67 C20. I may put the front clip on one of my 72 4X4s.

ebfabman, The angle that the Panel is setting at makes it tough to see the unpainted Cowl induction hood I put on it.... I have been doing some work on it but mostly collecting parts. I think that I have about everything for it now and it's just a matter of doing it. I have a 72 1/2 ton burb chassis in the shop that I bought just for the panel and I will be painting, lowering, installing the BB 402 and etc getting it ready for the panel. I need to take the panel to get the inner roof section and drivers side A-piller replaced then the firewall painted Cadilac white diamond so I can start installing the air stuff from the 72 burb on it. Thanks for asking. WES www.ClassicHeartbeat.com

*racedvl* · 07-14-2002, 11:51 AM

This is what I would concider a parts truck. This was my old 72 burb back in 95, when I was in high school.

*racedvl* · 07-14-2002, 11:52 AM

Sorry forgot the pic......

*racedvl* · 07-14-2002, 11:53 AM

Here is another pic...

71402BB · 07-14-2002, 12:13 PM

What happen to it racedvl?

chevy2racr · 07-14-2002, 01:34 PM

Wes, Why don't you take some of those parts that might be ader to get, but sell that burb to someone without totally tearin it apart, or you could give me whatsleft when ur done
:-D
Bryce

*racedvl* · 07-14-2002, 11:21 PM

I sent that poor old truck to the crusher I think sometime in '99.

The guage bezel, and the radaitor are in my 69 now. I also saved the booster, and the p/s gear box. I saved the spindles as well. I had blowen the engine, it needed a clutch, and a new master. And at the time, i was not addicted to these trucks like I am now, plus I was not too good at turning wrenches then. : (

Longhorn Man · 07-14-2002, 11:26 PM

Don't feel too bad Jason...imagine the rust on it today if it was still your daily driver.

*racedvl* · 07-14-2002, 11:29 PM

Ya know the kicker of it that if I could turn wrenches then, I would most likely still be drivin it today.......

07-13-2002, 12:32 PM	#1
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Hopefully better pictures of the Sub and Panel Here is a better picture of the Sub. __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 10-04-2007 at 06:30 PM.

07-13-2002, 12:33 PM	#2
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Here is the Sub with one of the recipiants of the parts. __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 10-04-2007 at 06:30 PM.

07-13-2002, 12:46 PM	#3
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Here is the recipient of the front disk brakes, power brakes and possi rear. __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys Last edited by Classic Heartbeat; 10-04-2007 at 06:30 PM.

07-14-2002, 04:00 AM	#6
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Jason, realy it isn't as clean as it looks in these pictures. It probly could be restored, but I realy need the parts for my two 67s.... The BB 402, front/rear air, power steering, front inner roof panel, drivers side A pillar, and lots of other small parts will go into my panel..... The front disk brake crossmember, power brakes, possi and possi rear end will go into the 67 C20. I may put the front clip on one of my 72 4X4s. ebfabman, The angle that the Panel is setting at makes it tough to see the unpainted Cowl induction hood I put on it.... I have been doing some work on it but mostly collecting parts. I think that I have about everything for it now and it's just a matter of doing it. I have a 72 1/2 ton burb chassis in the shop that I bought just for the panel and I will be painting, lowering, installing the BB 402 and etc getting it ready for the panel. I need to take the panel to get the inner roof section and drivers side A-piller replaced then the firewall painted Cadilac white diamond so I can start installing the air stuff from the 72 burb on it. Thanks for asking. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

07-14-2002, 11:52 AM	#8
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Sorry forgot the pic...... Attached Images

07-13-2002, 11:33 PM	#4
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	That poor burb....... I wish I could find one that clean around here......

07-13-2002, 11:43 PM	#5
ebfabman Registered User Join Date: Nov 2001 Location: Concord, NC Posts: 2,488	I see the hoods off the panel, been workin on it?

07-14-2002, 11:51 AM	#7
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	This is what I would concider a parts truck. This was my old 72 burb back in 95, when I was in high school.

07-14-2002, 11:53 AM	#9
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Here is another pic... Attached Images

07-14-2002, 12:13 PM	#10
71402BB now thats a true COON DOG Join Date: Nov 2000 Location: Franconia, NH Posts: 1,977	What happen to it racedvl? __________________ current project 67 402BB stout th350 3.08's with a locker. Plan on tubs 18.5's out back! (thanks Burnsman!) 71 SWB Stepside, was a 250, now is a 402 Big Block with 4 speed and 3.73's ( was crushed by a tree, bed sold, motor pulled) was my first truck!... oh well... 72 LWB 4x4 350 4-speed 3.08's posi wearing army olive drab green (SOLD!) 68 BURB 50TH LOOKALIKE work in progress, soon to have 250-I6 with a 3-speed on the tree 4.11's and posi ( currently sitting in back yard tarped awaiting time, $$$, and lots of love!) 67 1 TON- work truck 396 sm 420 4-speed, flat bed 4.57 gears "big red" (my first landscape truck, very rusty and crusty! but still gets the job done when needed!)

07-14-2002, 01:34 PM	#11
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	Wes, Why don't you take some of those parts that might be ader to get, but sell that burb to someone without totally tearin it apart, or you could give me whatsleft when ur done :-D Bryce __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

07-14-2002, 11:21 PM	#12
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	I sent that poor old truck to the crusher I think sometime in '99. The guage bezel, and the radaitor are in my 69 now. I also saved the booster, and the p/s gear box. I saved the spindles as well. I had blowen the engine, it needed a clutch, and a new master. And at the time, i was not addicted to these trucks like I am now, plus I was not too good at turning wrenches then. : (

07-14-2002, 11:26 PM	#13
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Don't feel too bad Jason...imagine the rust on it today if it was still your daily driver.

07-14-2002, 11:29 PM	#14
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Ya know the kicker of it that if I could turn wrenches then, I would most likely still be drivin it today.......



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.