Still looking for good cab in Missouri - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RShaips · 12-18-2005, 10:20 AM

I know, nothing close to me but thought I'd post again. Anyway need a good 69-72 cab, high hump, low hump, a/c or not doesn't matter. Thanks

**lolife99** · 12-18-2005, 03:46 PM

How good of cab are you looking for? This board is a good source,... but you probably won't find it in Missouri. Expect to replace rockers and cab corners at the very minimum.

RShaips · 12-18-2005, 07:45 PM

Well, of course I am looking for a perfect cab! But I am well aware of what is available. Don't mind paying for a good one, if I can find it.

**lolife99** · 12-18-2005, 09:11 PM

sorry,... I had to go to Colorado to get mine AZ cab. Hope I didn't offend you.

RShaips · 12-19-2005, 12:14 AM

No problem! I'll find what I'm looking for eventually. Thanks

RShaips · 12-26-2005, 09:57 PM

Still here

**JDL** · 12-28-2005, 10:15 PM

I might sale mine

RShaips · 12-28-2005, 11:12 PM

PM sent

RicksTrucks · 12-29-2005, 07:30 PM

I will be picking up a 67 small window soon.

RShaips · 12-29-2005, 07:53 PM

The truck is a 72 I really need a 69-72 cab. Thanks anyway

crews · 12-29-2005, 08:04 PM

Sine we are "neighbors"...keep in mind I travel around quite a bit and can help bring you one if you find something you like that is out of state.

Just thought I would extend the offer...I know finding a "good" cab in this state is going to be tough.....

**t korinek** · 12-30-2005, 12:52 AM

I have 2 nice non air cabs $400 each, in AZ both low hump.

**too much stuff** · 12-30-2005, 11:26 AM

I have a better than average minnesota cab that will need some work. $400 for whats left of the truck with cab. In northern MN. 72 also.

Putter · 12-30-2005, 01:08 PM

Drive on down to Jackson, MS. I have a '69 cab and a complete '71 truck. Both are non-air. Plus we have a junk yard with several...that's SEVERAL complete trucks in there.
You can take either one of mine for $300 (no doors included)
'69 has pin holes in the rockers and corners, but needs driver's kick panel starting several inches below the vent.
'71 I haven't really looked over but there is a hole in the floor on the driver's side.
Below are two pics I have of the cab....I can take better ones, but just to give you a rough idea.....that is the '69 cab in the background.

DTerry · 02-12-2006, 02:36 PM

Quote:

Originally Posted by Putter

...You can take either one of mine for $300 (no doors included)....

Is this because:
1. you'd want more with the doors, and won't separate?
2. you're selling them separately?
3. there not for sale?
4. none of they above, I'm shipping them to DTerry at no cost?
c'mon please pick number 4!!!

I think he's gonna pick the dreaded 3!!!

(D)

justascatch · 02-12-2006, 05:49 PM

Once again, come to Oklahoma. Worth the drive. Two great cabs. One exc bed floor LWB. SWB ? I have one. Can't get anyone to see the land of the REDMAN. Call, I'll get you to visit !!! 405-788-5001

454_72_4X4 · 02-12-2006, 06:20 PM

Quote:

Originally Posted by justascatch

Once again, come to Oklahoma. Worth the drive. Two great cabs. One exc bed floor LWB. SWB ? I have one. Can't get anyone to see the land of the REDMAN. Call, I'll get you to visit !!! 405-788-5001

justascatch, Did you have a thread about these cabs? I think I remember it if it was you. I'll do a search. I might be coming down to Tulsa anyway.

Do you have any pics? That's a long drive for an unseen cab.
Bed floor, I need the long bed.

My email is tbaker@nemr.net if you need it to send pics.

justascatch · 02-12-2006, 07:56 PM

A long drive for what you're looking for ? And you live in MO ? I have several MN, IA, MI people drive every month to see and buy from me, but the board members want 45 pics, 3yr-36,000 mile warranty and sleep with my wife !!! The $ 150 cabs are gone...I part 5-10 67-72 trucks a month, sell in bulk and try to help board members when I can. I just got tired of the "still looking for a good cab" ...sorry, RShaips

CHUCKER · 12-31-2005, 03:31 AM

i have a 71 cab low hump i'll take $100.00. does need some work

RShaips · 01-09-2006, 12:05 PM

How much work does it need?

Putter · 01-09-2006, 12:42 PM

Quote:

Originally Posted by RShaips

How much work does it need?

That sounded a lot like....
"Yo mama is so fat....."
{crowd} - "HOW FAT IS SHE?????"

RShaips · 01-09-2006, 12:46 PM

Yea I know, Yours looks decent, just too far for me!

larry may · 01-10-2006, 09:24 PM

Quote:

Originally Posted by RShaips

Yea I know, Yours looks decent, just too far for me!

I have one down the road south from you . If you want to look at it . Will get you my phone number.

724x4a/cchevy · 01-09-2006, 10:32 PM

you might talk to ron manes www.manestruckparts.com He usually has some good used parts. tell him "tow hook justin" sent ya (inside joke between me and ron)

MISTERSHOTGUN · 01-09-2006, 10:50 PM

I,m looking for a good cab as well only in east Texas not missouri. hopefully one with a title but one without will be ok if condition is nice. floor and rocker and cab corner rust would be expected and easy to fix. hopefully i'll find one without rust under the cowl or around the front windshield must be a big window.. any help here would be nice. thanks

12-18-2005, 10:20 AM	#1
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Still looking for good cab in Missouri I know, nothing close to me but thought I'd post again. Anyway need a good 69-72 cab, high hump, low hump, a/c or not doesn't matter. Thanks

12-18-2005, 03:46 PM	#2
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,702	Re: Still looking for good cab in Missouri How good of cab are you looking for? This board is a good source,... but you probably won't find it in Missouri. Expect to replace rockers and cab corners at the very minimum. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-18-2005, 07:45 PM	#3
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Still looking for good cab in Missouri Well, of course I am looking for a perfect cab! But I am well aware of what is available. Don't mind paying for a good one, if I can find it.

12-18-2005, 09:11 PM	#4
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,702	Re: Still looking for good cab in Missouri sorry,... I had to go to Colorado to get mine AZ cab. Hope I didn't offend you. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-19-2005, 12:14 AM	#5
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Still looking for good cab in Missouri No problem! I'll find what I'm looking for eventually. Thanks

12-26-2005, 09:57 PM	#6
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Still looking for good cab in Missouri Still here

12-28-2005, 10:15 PM	#7
JDL Senior Member Join Date: Sep 2000 Location: Agency IA. Posts: 1,852	Re: Still looking for good cab in Missouri I might sale mine __________________ 72 Chevy short step side with 454 air and tilt. 72 nova project car 63 chevy II drag car Agency Iowa

12-28-2005, 11:12 PM	#8
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Still looking for good cab in Missouri PM sent

12-29-2005, 07:30 PM	#9
RicksTrucks Senior Member Join Date: Jan 2005 Location: Claremore, OK 74017 Posts: 2,639	Re: Still looking for good cab in Missouri I will be picking up a 67 small window soon. __________________ 68 Short Stepside C-10 69 SWB C-10 70 Flatbed C-20 70 LWB C-20 BB402 70 LWB C-10 CST 70 LWB C-10 CST 71 Short Stepside Cheyenne C-10 72 LWB C-10 72 Blazer 4x4 4spd 95 Jeep Cherokee 4x4

12-29-2005, 07:53 PM	#10
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Still looking for good cab in Missouri The truck is a 72 I really need a 69-72 cab. Thanks anyway

12-29-2005, 08:04 PM	#11
crews It just doesn't matter Join Date: Apr 2001 Location: Huntington Beach, Ca Posts: 1,660	Re: Still looking for good cab in Missouri Sine we are "neighbors"...keep in mind I travel around quite a bit and can help bring you one if you find something you like that is out of state. Just thought I would extend the offer...I know finding a "good" cab in this state is going to be tough..... __________________ 05 Chevy Silverado..... A rogue BMW guy.... If you don't like me- TAKE A NUMBER; There are people ahead of you!!

12-30-2005, 12:52 AM	#12
t korinek Truckin' Krazy Join Date: May 2000 Location: mesa az Posts: 6,194	Re: Still looking for good cab in Missouri I have 2 nice non air cabs $400 each, in AZ both low hump. Attached Images __________________ Dealer for: American Auto Wire Precision weatherstripping Dakota Digital Trim parts Carpets Truck World seat covers & Many others Chevy Parts locator in Mesa AZ!

12-30-2005, 11:26 AM	#13
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,810	Re: Still looking for good cab in Missouri I have a better than average minnesota cab that will need some work. $400 for whats left of the truck with cab. In northern MN. 72 also. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

12-30-2005, 01:08 PM	#14
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Still looking for good cab in Missouri Drive on down to Jackson, MS. I have a '69 cab and a complete '71 truck. Both are non-air. Plus we have a junk yard with several...that's SEVERAL complete trucks in there. You can take either one of mine for $300 (no doors included) '69 has pin holes in the rockers and corners, but needs driver's kick panel starting several inches below the vent. '71 I haven't really looked over but there is a hole in the floor on the driver's side. Below are two pics I have of the cab....I can take better ones, but just to give you a rough idea.....that is the '69 cab in the background. Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 12-30-2005 at 01:15 PM.

02-12-2006, 05:49 PM	#16
justascatch Justascratch Join Date: Jun 2004 Location: OKC, OK Posts: 160	Re: Still looking for good cab in Missouri Once again, come to Oklahoma. Worth the drive. Two great cabs. One exc bed floor LWB. SWB ? I have one. Can't get anyone to see the land of the REDMAN. Call, I'll get you to visit !!! 405-788-5001 __________________ justascratch-OKC,OK



Register or Log In To remove these advertisements.

02-12-2006, 07:56 PM	#18
justascatch Justascratch Join Date: Jun 2004 Location: OKC, OK Posts: 160	Re: Still looking for good cab in Missouri A long drive for what you're looking for ? And you live in MO ? I have several MN, IA, MI people drive every month to see and buy from me, but the board members want 45 pics, 3yr-36,000 mile warranty and sleep with my wife !!! The $ 150 cabs are gone...I part 5-10 67-72 trucks a month, sell in bulk and try to help board members when I can. I just got tired of the "still looking for a good cab" ...sorry, RShaips __________________ justascratch-OKC,OK

12-31-2005, 03:31 AM	#19
CHUCKER Registered User Join Date: Jun 2000 Location: LEE'S SUMMIT, MO. USA Posts: 246	Re: Still looking for good cab in Missouri i have a 71 cab low hump i'll take $100.00. does need some work __________________ 1972 K/20,4X4,454, dark olive 1937 General motors truck (big project) 2005 gmc envoy (wife's) 2003 2500hd ls, crewcab, 4x4, 360, hd 4spd automatic trans., Lee's summit, MO. S.E. of Kansas City,MO

01-09-2006, 12:05 PM	#20
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Still looking for good cab in Missouri How much work does it need?

01-09-2006, 12:46 PM	#22
RShaips Senior Member Join Date: Jun 2002 Location: Augusta Missouri Posts: 804	Re: Still looking for good cab in Missouri Yea I know, Yours looks decent, just too far for me!

01-09-2006, 10:32 PM	#24
724x4a/cchevy Self-proclaimed LED man Join Date: Nov 2003 Location: Harrisburg, Missouri Posts: 1,021	Re: Still looking for good cab in Missouri you might talk to ron manes www.manestruckparts.com He usually has some good used parts. tell him "tow hook justin" sent ya (inside joke between me and ron)

01-09-2006, 10:50 PM	#25
MISTERSHOTGUN Registered User Join Date: Apr 2005 Posts: 95	Re: Still looking for good cab in Missouri I,m looking for a good cab as well only in east Texas not missouri. hopefully one with a title but one without will be ok if condition is nice. floor and rocker and cab corner rust would be expected and easy to fix. hopefully i'll find one without rust under the cowl or around the front windshield must be a big window.. any help here would be nice. thanks

Register or Log In To remove these advertisements.