Please post picks of front/rear rollpans - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bowtie67 · 12-29-2005, 08:13 AM

I would like to see some picks of both the front and rear or any roll pans, prefferably on stepsides. Be it custom made or purchased through any vendor. Would also like to know how much of an ordeal you went through to install them. Thanks Bowtie

krue · 12-29-2005, 09:38 AM

Putter's the man to see for rear rollpan. He made one that matches the back of the stepside fender. Really looks good. I'll see if I can find a link.

Putter · 12-29-2005, 10:03 AM

Here is my roll pan. Hand made by your's truely. This is not the finished product. I can't find any pics of that (Krue took some while following me one day). Keep in mind that I when these were taken, I had not done ANY body work to the bed to make it pretty yet.
Anyway, since these photos, I have cut in 15" LED taillights (one on each side) that mount from the inside so they sit flush with the surface.

The first one is with no pan, just so you can see the difference....

Putter · 12-29-2005, 10:08 AM

Oh, sorry...I didn't answer the question part of the post...
The frame ends were going to touch the rollpan, so I had to trim them at an angle to make the pan fit. I only removed about two inches at the bottom of the frame rail and cut at an angle to zero inches at the top. Basically cut off a small triangle.
Mounting it was simply drilling three holes on each side in the fender's lip and bolting her up. Could have been done with two bolts on each side, but I wanted it to stay put.
You could also weld it on, but there was always the possibility of wanting to remove the fender later, so I bolted mine on.

***THE BOLT YOU SEE HANGING DOWN IN THE THIRD PHOTO IS FROM THE TANK STRAP...NOT THE ROLLPAN.***

Bowtie67 · 12-29-2005, 11:54 AM

I actually saw your truck in another post and that is why I had posted to see some other picks as well, yours does look like a very clean simple setup. I agree about bolting it on as well, you never know if you'll ever have to take it off to do other things later.

Putter · 12-29-2005, 12:07 PM

I contacted Sir Michaels and offered to send them one if they would produce them for me. They never got back to me, so....at least I have something different.

matthufham · 12-29-2005, 02:10 PM

some are board members, dial up beware.

FRENCHBLUE72 · 12-29-2005, 02:03 PM

Heres a front pan...

matthufham · 12-29-2005, 02:11 PM

matthufham · 12-29-2005, 02:12 PM

smbrouss70 · 12-29-2005, 02:19 PM

Quote:

Originally Posted by rick980

I have a 72 front roll pan but don't have it on yet, hell I don't have fenders on the truck yet LOL. I am not sure how I am gonna mount this thing either my guess is a couple screws on the fenders from inner side of rollpan. hoping it doesn't require any frame trimming cuz it will not be happening, a bumper will be goin back instead.

I never put one on, but I'm pretty sure you have to cut off your front frame horns to put a front pan on.

93Z71 · 12-29-2005, 05:08 PM

1968GMC · 12-29-2005, 05:51 PM

mine

12-29-2005, 08:13 AM	#1
Bowtie67 Registered User Join Date: Jan 2004 Location: NH Posts: 2,266	Please post picks of front/rear rollpans I would like to see some picks of both the front and rear or any roll pans, prefferably on stepsides. Be it custom made or purchased through any vendor. Would also like to know how much of an ordeal you went through to install them. Thanks Bowtie __________________ 1967 C10 - SWBSS Pro Street 427sbc, 700R4 & 4.10 Gears 1948 Chevy FleetMaster Coupe, LS1, (almost done) 1950 Chevy StyleLine Coupe 250/6 3x2 Dueces 2009 Toyota Tundra 1996 Harley RoadKing "I maybe getting old, but I can still burn rubber with the best of them" Last edited by Bowtie67; 12-29-2005 at 08:16 AM.

12-29-2005, 09:38 AM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Please post picks of front/rear rollpans Putter's the man to see for rear rollpan. He made one that matches the back of the stepside fender. Really looks good. I'll see if I can find a link. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-29-2005, 10:03 AM	#3
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Please post picks of front/rear rollpans Here is my roll pan. Hand made by your's truely. This is not the finished product. I can't find any pics of that (Krue took some while following me one day). Keep in mind that I when these were taken, I had not done ANY body work to the bed to make it pretty yet. Anyway, since these photos, I have cut in 15" LED taillights (one on each side) that mount from the inside so they sit flush with the surface. The first one is with no pan, just so you can see the difference.... Attached Images __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 12-29-2005 at 10:04 AM.

12-29-2005, 10:08 AM	#4
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Please post picks of front/rear rollpans Oh, sorry...I didn't answer the question part of the post... The frame ends were going to touch the rollpan, so I had to trim them at an angle to make the pan fit. I only removed about two inches at the bottom of the frame rail and cut at an angle to zero inches at the top. Basically cut off a small triangle. Mounting it was simply drilling three holes on each side in the fender's lip and bolting her up. Could have been done with two bolts on each side, but I wanted it to stay put. You could also weld it on, but there was always the possibility of wanting to remove the fender later, so I bolted mine on. *THE BOLT YOU SEE HANGING DOWN IN THE THIRD PHOTO IS FROM THE TANK STRAP...NOT THE ROLLPAN.* __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket** Last edited by Putter; 12-29-2005 at 10:10 AM.

12-29-2005, 11:54 AM	#5
Bowtie67 Registered User Join Date: Jan 2004 Location: NH Posts: 2,266	Re: Please post picks of front/rear rollpans I actually saw your truck in another post and that is why I had posted to see some other picks as well, yours does look like a very clean simple setup. I agree about bolting it on as well, you never know if you'll ever have to take it off to do other things later. __________________ 1967 C10 - SWBSS Pro Street 427sbc, 700R4 & 4.10 Gears 1948 Chevy FleetMaster Coupe, LS1, (almost done) 1950 Chevy StyleLine Coupe 250/6 3x2 Dueces 2009 Toyota Tundra 1996 Harley RoadKing "I maybe getting old, but I can still burn rubber with the best of them"

12-29-2005, 12:07 PM	#6
Putter More Cowbell.... Join Date: Mar 2004 Location: Puckett, MS Posts: 3,569	Re: Please post picks of front/rear rollpans I contacted Sir Michaels and offered to send them one if they would produce them for me. They never got back to me, so....at least I have something different. __________________ *There once was a member from Puckett.....Who ( fill in the blank blank blank* ) bucket**

12-29-2005, 02:10 PM	#7
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: Please post picks of front/rear rollpans some are board members, dial up beware.

12-29-2005, 02:03 PM	#8
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Please post picks of front/rear rollpans Heres a front pan... Attached Images __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

12-29-2005, 02:11 PM	#9
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: Please post picks of front/rear rollpans Last edited by matthufham; 12-29-2005 at 02:13 PM.

12-29-2005, 02:12 PM	#10
matthufham Registered User Join Date: Feb 2005 Location: Carl Junction, Missouri Posts: 2,061	Re: Please post picks of front/rear rollpans Last edited by matthufham; 12-29-2005 at 02:17 PM.

12-29-2005, 05:08 PM	#12
93Z71 Registered User Join Date: Dec 2005 Location: Portsmouth, Ohio Posts: 124	Re: Please post picks of front/rear rollpans __________________ Brandon- 1966 Bel Air more door 1968 C/10 Shop Truck: SWB Project coming soon 1996 Silverado Z71 Rest In Peace Mom 5/11/58-12/2/09 RIP Grandma and Grandpa Amanda Royster 9/21/87-2/5/06 Last edited by 93Z71; 12-29-2005 at 05:13 PM.

12-29-2005, 05:51 PM	#13
1968GMC love my truck Join Date: May 2001 Location: aylmer QC Posts: 648	Re: Please post picks of front/rear rollpans mine Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.