![]() |
|
![]() |
#1 |
Senior Member
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
|
Starting on the Body
Well, I'm now starting to take this "Rig" apart, and start the body work and paint. At least I don't have any rust to deal with that I can see. Just sand, sand, sand....Hope to have this in paint by spring. Still haven't decided on what color yet.........
__________________
1997 GMC Sierra Ext 1965 Mustang |
![]() |
![]() |
![]() |
#2 |
Tot Roddin'
Join Date: Apr 2005
Location: Mid-MO
Posts: 24,461
|
Re: Starting on the Body
Good luck on the body work and painting. Keep us posted with information on the rebuild.
__________________
-Nate ![]() 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package) |
![]() |
![]() |
![]() |
#3 |
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,857
|
Re: Starting on the Body
Steve,
If you need any help sanding let me know and I will try to get up there and give you a hand. You have my number.
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 1,534
|
Re: Starting on the Body
70GMCer, Where on earth, ah, I mean Maryland did you find a rust free truck like that? Nice GMC! Good luck with the body work. I have been considering dual exhaust exiting before the wheel like yours, do you plan to keep it that way...any problems with smoke / heat on the tires?
__________________
'72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction. ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#5 |
18 Till I Die
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
|
Re: Starting on the Body
Hey Sweet. I ran Exhast like that for years and never had a problem, Thought Id toss that in
__________________
2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home... ![]() |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Dec 2004
Location: Green Bay, WI
Posts: 44
|
Re: Starting on the Body
That's the way i run my exhaust, sometimes it seems to bother people who pull up alongside of me, maybe I'll add flame throwers
![]() |
![]() |
![]() |
![]() |
#7 | |
Registered User
![]() Join Date: Aug 2005
Location: Central Illinois
Posts: 187
|
Re: Starting on the Body
Quote:
|
|
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
|
Re: Starting on the Body
You should see the color in person....awful.... Anyway, I got this off a guy in central Pa. He said this was always a farm truck. The rockers are all solid as is the floors and mounts. Only rust I have seen is the right inner finder under the battery, and on the bed floor is a 1" rust hole near the tailgate. This would be a good candidate for a frame off, but I just don't want to tie this project up any longer than I have too. I haven't decided if I'm going to change the exhaust yet or not. I haven't had any problems with heat coming out at that point and sounds great with the Hedmen headers and Hedmen mufflers.
I'll keep the pics coming as I go along. Hey Jim, you're always welcome to come up......if anything, just to hang out and tell lies..(BSing) hehe
__________________
1997 GMC Sierra Ext 1965 Mustang |
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
|
Re: Starting on the Body
More updated pics......so far, no rust holes to repair.......hoping to get the rest of the truck in primer this weekend......
__________________
1997 GMC Sierra Ext 1965 Mustang |
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
|
Re: Starting on the Body
1 more for today........
__________________
1997 GMC Sierra Ext 1965 Mustang |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Nov 2003
Location: Alexandria, VA
Posts: 1,534
|
Re: Starting on the Body
Good job man, progress pictures are always nice, thanks. I need a reliable camera so I can do the same. My project is actually regressing with the fog and humidity here lately, I can watch rust form on my stuff.
__________________
'72 GMC SWB C1500 Custom, frame-off in progress. 383 SBC, 9:1CR, Comp Cams XE262H, Scat internal balanced crank, Eagle SIR 6" rods, Keith Black dish pistons, Dart Iron Eagle 72/180 heads, Weiand Stealth intake, Stewart stage I water pump, Holley 4bbl vac sec, TH350 with B&M Shift Improver Kit. 12 bolt positraction. ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#12 |
I miss this truck.
Join Date: Dec 2001
Location: Lexington, KY U.S.A.
Posts: 2,863
|
Re: Starting on the Body
That truck would be a great frame-up. I agree. Nice dog, too.
__________________
'07 GMC Acadia SLT. Sweet ride. '08 Crew Cab Z-71 short bed. Really like this truck A LOT. |
![]() |
![]() |
![]() |
#13 |
Senior Member
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
|
Re: Starting on the Body
I just don't want to tie the truck up that long for a frame off. Again, I'm hoping to get this in paint by spring. That's assuming that my Golden Retriever will stay out of the way.....hehe.....he likes to help relocating tools and such....
__________________
1997 GMC Sierra Ext 1965 Mustang |
![]() |
![]() |
![]() |
#14 |
67-72 Addict!
Join Date: Feb 2002
Location: The TAX State!
Posts: 7,857
|
Re: Starting on the Body
Steve, I'll see if I can get up there this weekend to give you a hand. I'm supposed to be helping my buddy put a tranny in a Camry this weekend and I'm waiting for him to call me for the time.
__________________
Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads |
![]() |
![]() |
![]() |
#15 |
Senior Member
Join Date: Apr 2005
Location: Joppa, Maryland
Posts: 4,408
|
Re: Starting on the Body
Hum........I would much rather sand a truck......give me a call.....
I have to go out in the morning.....will be back around 11:00....
__________________
1997 GMC Sierra Ext 1965 Mustang Last edited by 70GMCer; 01-13-2006 at 08:36 PM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|