67-72 step notch?? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bagged74 · 01-14-2006, 12:10 AM

anyone know who makes a notch for 67-72 trucks other than the small bolt in one? Im looking for something along the lines of a weld in step notch. any help would be appreciated. Thanks

67Fleet · 01-14-2006, 12:45 AM

Suicide Doors has a pretty good variety. Or any good shop can fab something up for you.

el curioso · 01-14-2006, 02:39 PM

https://www.baganddrag.com/categoryN...?categoryId=10

bagged74 · 01-14-2006, 09:11 PM

neither of those places appear to have one that is curved the same as the frame on a coil sprung truck.

67Fleet · 01-14-2006, 09:19 PM

Doesn't matter. It's a weld in, you can cut and weld it any way you want!

bagged74 · 01-14-2006, 09:22 PM

I understand that. I work in a shop that builds street rods. I can do the fabrication if I wanted to. I was just looking for something that would save me the time/ trouble of building it.

BigShoe24 · 01-15-2006, 02:46 AM

Bagged74, check out kpcomponents.com they offer a step notch that is tappered as is your frame. I have been looking for the same thing for my own truck. Im not sure how tall it is though. If you find out please let me know.

a squarecan · 01-15-2006, 02:33 PM

I do not know of anyone making a 63-72 specific step notch, but I know a number of people have used the standard 8 piece step notch that Jason along with many others sell and just weld it in. The only down fall to this is that your notch will sit something like this.. \ / Now it is not that drastic and after looking at a few I kinda like the look. I know there is someone on the board that has a 66 long bed he did this way. I have decided I am just going to cut my frame off right behind the first bed mount and make the rest. We will see though cause I may get lazy and just build a notch and weld it in at an angle.

Hope this helps some
Keith

Inthuwind · 01-15-2006, 09:29 PM

I bought a notch from Western Chasis that welds in. It's like they took a short piece of 6 inch steel pipe and cut it in half. I'm cutting my frame to put it in.

project76 · 01-15-2006, 09:52 PM

As mentioned above
http://www.kpcomponents.com/default.asp?S=503&A=E&PKV=SN-2|0

I have this notch installed, fit was pretty good.

BigShoe24 · 01-16-2006, 12:54 AM

Project76, Was wondering how tall this notch is from kp, Could you possibly measure from the bottom of the original frame to the bottom of the new step notch. Thanks for the help. Just want to make sure that I will have enough room to go low.

project76 · 01-16-2006, 08:44 AM

Quote:

Originally Posted by BigShoe24

Project76, Was wondering how tall this notch is from kp, Could you possibly measure from the bottom of the original frame to the bottom of the new step notch. Thanks for the help. Just want to make sure that I will have enough room to go low.

The notch is 7.5" from the bottom of the factory rail. Not sure if its gonna get me low enough yet or not with my 29" tires. Waiting on some 3" blocks i ordered to come in, since the frame rails and trailing arms are hitting now.

bagged74 · 01-16-2006, 12:55 AM

I think its 8 inches, but i wouldnt swear to it.

01-14-2006, 12:10 AM	#1
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	67-72 step notch?? anyone know who makes a notch for 67-72 trucks other than the small bolt in one? Im looking for something along the lines of a weld in step notch. any help would be appreciated. Thanks

01-14-2006, 12:45 AM	#2
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	Re: 67-72 step notch?? Suicide Doors has a pretty good variety. Or any good shop can fab something up for you. __________________ -Bret 67 short-fleet sold!

01-14-2006, 02:39 PM	#3
el curioso Registered User Join Date: Dec 2004 Location: El paso, Tx. Posts: 428	Re: 67-72 step notch?? https://www.baganddrag.com/categoryN...?categoryId=10

01-14-2006, 09:11 PM	#4
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	Re: 67-72 step notch?? neither of those places appear to have one that is curved the same as the frame on a coil sprung truck.

01-14-2006, 09:19 PM	#5
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	Re: 67-72 step notch?? Doesn't matter. It's a weld in, you can cut and weld it any way you want! __________________ -Bret 67 short-fleet sold!

01-14-2006, 09:22 PM	#6
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	Re: 67-72 step notch?? I understand that. I work in a shop that builds street rods. I can do the fabrication if I wanted to. I was just looking for something that would save me the time/ trouble of building it.

01-15-2006, 02:46 AM	#7
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: 67-72 step notch?? Bagged74, check out kpcomponents.com they offer a step notch that is tappered as is your frame. I have been looking for the same thing for my own truck. Im not sure how tall it is though. If you find out please let me know.

01-15-2006, 02:33 PM	#8
a squarecan Registered User Join Date: Mar 2004 Location: Portland, Oregon Posts: 232	Re: 67-72 step notch?? I do not know of anyone making a 63-72 specific step notch, but I know a number of people have used the standard 8 piece step notch that Jason along with many others sell and just weld it in. The only down fall to this is that your notch will sit something like this.. \ / Now it is not that drastic and after looking at a few I kinda like the look. I know there is someone on the board that has a 66 long bed he did this way. I have decided I am just going to cut my frame off right behind the first bed mount and make the rest. We will see though cause I may get lazy and just build a notch and weld it in at an angle. Hope this helps some Keith

01-15-2006, 09:29 PM	#9
Inthuwind Straight jacket required Join Date: Oct 2003 Location: OKC, OK Posts: 882	Re: 67-72 step notch?? I bought a notch from Western Chasis that welds in. It's like they took a short piece of 6 inch steel pipe and cut it in half. I'm cutting my frame to put it in. __________________ 1968 C10 Short Stepper 350/350 A/C P/S P/B Front disc 3/5 static/ 12bolt rear 3:73 1979 Pontiac Trans Am 10th Anniversary/455/4spd 2011 H-D Street Glide - CAMMED n lowered Dad always said,"Son, if you can't be good...be good at it."

01-15-2006, 09:52 PM	#10
project76 Registered User Join Date: Nov 2004 Location: Cecil County Maryland Posts: 135	Re: 67-72 step notch?? As mentioned above http://www.kpcomponents.com/default.asp?S=503&A=E&PKV=SN-2\|0 I have this notch installed, fit was pretty good. __________________ Brandon project 67 swb bagged on 20" Coddingtons

01-16-2006, 12:54 AM	#11
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: 67-72 step notch?? Project76, Was wondering how tall this notch is from kp, Could you possibly measure from the bottom of the original frame to the bottom of the new step notch. Thanks for the help. Just want to make sure that I will have enough room to go low. Last edited by BigShoe24; 01-19-2006 at 05:09 PM.

01-16-2006, 12:55 AM	#13
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	Re: 67-72 step notch?? I think its 8 inches, but i wouldnt swear to it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.