Steering Whel Nut - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Wookiee · 01-19-2006, 08:27 PM

What size is the steering wheel retaining nut? Mine happened to be missing when I bought the truck, so I found out it's kinda hard to put the wheel back on without it. Truck is a '70 non-tilt.

**'68OrangeSunshine** · 01-20-2006, 07:23 AM

I'm not sure about the internal diameter or thread count, but I remember a 3/4" deepwell socket on a 3" extension and a breaker bar was the weapon of choice for tackling this gripe. So we know the nut size is 3/4" -- the steering shaft has to be about 1/2" or 9/16ths.
LMC lists them as P/N 34-0400 "Nut -Steering Column" for 45 cents.

01-19-2006, 08:27 PM	#1
Wookiee Registered User Join Date: Aug 2005 Location: Brentwood, TN Posts: 23	Steering Whel Nut What size is the steering wheel retaining nut? Mine happened to be missing when I bought the truck, so I found out it's kinda hard to put the wheel back on without it. Truck is a '70 non-tilt.

01-20-2006, 07:23 AM	#2
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,504	Re: Steering Whel Nut I'm not sure about the internal diameter or thread count, but I remember a 3/4" deepwell socket on a 3" extension and a breaker bar was the weapon of choice for tackling this gripe. So we know the nut size is 3/4" -- the steering shaft has to be about 1/2" or 9/16ths. LMC lists them as P/N 34-0400 "Nut -Steering Column" for 45 cents. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.