Anyone ever used another rear??? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Doug76 · 02-11-2006, 01:07 AM

Tried to do a search on this but didnt find anything..Has anyone tried or experimented with different rears such as a 10 bolt out of a camaro or an 8.8 out of a mustang? and yes I know a 12 bolt is a stronger rear i dont want to debate this.

**Ron 586** · 02-11-2006, 01:55 AM

Quote:

Originally Posted by Doug76

Tried to do a search on this but didnt find anything..Has anyone tried or experimented with different rears such as a 10 bolt out of a camaro or an 8.8 out of a mustang? and yes I know a 12 bolt is a stronger rear i dont want to debate this.

I have had good luck with the 4 that I have pounded on. One is in a 78 Camaro with a stout 350 engine, 350 trans with 4500 stall ACC converter, 456 gears in a locked 8.5 rearend. Another is in a 81 Camaro with a mild built 400 s.b. engine, 350 trans with a 3500 stall converter, 456 gears locked 8.5 rearend. Both transmissions had B&M shift kits installed when built. I ran 10 inch slicks on both with no problems. The other 2 were street cars that saw drag strip action from time to time. A year or so back one of the hot rod books that I get ran story on building them up for hi horsepower cars and said they would live. Yes I would have rather had a 12 bolt but hard to find and I didn't want to have to mortage my house for race car parts. If you got em, use em. Ron. (Mr Round Tuit)

ClemsonChevy · 02-11-2006, 10:45 AM

RON586, Do you still have the 78 or 81 Camaro? If so, could you measure the width from backing plate to backing plate on the rear end? I had an 80 Trans Am that had the 4 wheel disc brakes and the rears were vented rotors. I am wondering about using one of these under our trucks!

PS: I have a 72 C20 with rear leafs, so the swap would prolly be fairly easy.

**Ron 586** · 02-11-2006, 04:43 PM

I still have both of them. We got about 5 inches of snow last night so it will be a week or so before I can get to them but will get the information to you as soon as I can. Sorry if this is a hijack. Ron (Mr Round Tuit)

**Ron 586** · 02-14-2006, 07:35 PM

Quote:

Originally Posted by ClemsonChevy

RON586, Do you still have the 78 or 81 Camaro? If so, could you measure the width from backing plate to backing plate on the rear end? I had an 80 Trans Am that had the 4 wheel disc brakes and the rears were vented rotors. I am wondering about using one of these under our trucks!

PS: I have a 72 C20 with rear leafs, so the swap would prolly be fairly easy.

81 camaro 10 bolt 55 inches bp to bp.

EyeH8the24 · 02-11-2006, 04:51 PM

s-10 blazer rears work well too.......think they r 52 or 53 from backing plate to backing plate

cell · 02-11-2006, 07:11 PM

I have read that you can use the rear end off of an impala SS '94 through '96, which has disc brakes, and a 3.08 posi. The caprice cop cars had a similar beefy disc brake rear end, but it wasn't as wide as the SS rear end. This is what will be going in my truck (I will be putting in a cummins 4BT diesel engine with a tko-500 tranny. the 3.08 rear end with 29.5" tires will put me at 71 mph at torque peak (which is usually also the point of lowest brake specific fuel consumption) in 5th gear - perfect!).

see impalassforum.com - they have a parts forum.

LUV2XCLR8 · 02-14-2006, 08:13 PM

Quote:

Originally Posted by cell

I have read that you can use the rear end off of an impala SS '94 through '96, which has disc brakes, and a 3.08 posi. The caprice cop cars had a similar beefy disc brake rear end, but it wasn't as wide as the SS rear end. This is what will be going in my truck (I will be putting in a cummins 4BT diesel engine with a tko-500 tranny. the 3.08 rear end with 29.5" tires will put me at 71 mph at torque peak (which is usually also the point of lowest brake specific fuel consumption) in 5th gear - perfect!).

see impalassforum.com - they have a parts forum.

That sounds insane, be sure to take lots of pic's

ClemsonChevy · 02-14-2006, 09:22 PM

TY, Ron! I'll measure the two in my trucks to see if theres a difference or if so how short the Maro/AMs Tran would be.

cell · 02-15-2006, 02:29 AM

Quote:

Originally Posted by LUV2XCLR8

That sounds insane, be sure to take lots of pic's

Oh, I will! My cummins 4BT parts catalog and maintenance manual just arrived today. I am so psyched!

phantom dually · 02-11-2006, 07:27 PM

I put a Dana 60 rear into my 92 truck. A little fab work was required though.

Chevrolet4x4s · 02-14-2006, 08:03 PM

Just remember that some of the Camaro 10-bolts were 7.5 inch ring gear where as the truck(corprate)10-bolts were 8.5 inch ring gears
Hope this helps,
Shane

Jim_PA · 02-15-2006, 08:31 AM

Quote:

Originally Posted by Chevrolet4x4s

Just remember that some of the Camaro 10-bolts were 7.5 inch ring gear where as the truck(corprate)10-bolts were 8.5 inch ring gears
Hope this helps,
Shane

Yeah, 82+. Avoid these unless you want to just buy 20 or 30 and change them out like underwear.

ClemsonChevy · 02-16-2006, 02:00 AM

Quote:

Originally Posted by Jim_PA

Yeah, 82+. Avoid these unless you want to just buy 20 or 30 and change them out like underwear.

I wear a pair of underwear for 3 weeks...........

Yeah, the disc rear on my trans am was an '80 with WS6 susp. and rear vented rotors.

02-11-2006, 01:07 AM	#1
Doug76 This S&*! Is expensive! Join Date: Feb 2005 Location: Mechanicsville,Va Posts: 57	Anyone ever used another rear??? Tried to do a search on this but didnt find anything..Has anyone tried or experimented with different rears such as a 10 bolt out of a camaro or an 8.8 out of a mustang? and yes I know a 12 bolt is a stronger rear i dont want to debate this.

02-11-2006, 10:45 AM	#3
ClemsonChevy 8 vehicles only 4 that run Join Date: Feb 2006 Location: Clemson, SC Posts: 236	Re: Anyone ever used another rear??? RON586, Do you still have the 78 or 81 Camaro? If so, could you measure the width from backing plate to backing plate on the rear end? I had an 80 Trans Am that had the 4 wheel disc brakes and the rears were vented rotors. I am wondering about using one of these under our trucks! PS: I have a 72 C20 with rear leafs, so the swap would prolly be fairly easy. Last edited by ClemsonChevy; 02-11-2006 at 10:47 AM.

02-11-2006, 04:43 PM	#4
Ron 586 RIP Mr Ron Join Date: Dec 2005 Location: Big Sandy, Tn. 38221 Posts: 8,166	Re: Anyone ever used another rear??? I still have both of them. We got about 5 inches of snow last night so it will be a week or so before I can get to them but will get the information to you as soon as I can. Sorry if this is a hijack. Ron (Mr Round Tuit)

02-11-2006, 04:51 PM	#6
EyeH8the24 Registered User Join Date: Dec 2004 Location: beulah,alabama Posts: 1,075	Re: Anyone ever used another rear??? s-10 blazer rears work well too.......think they r 52 or 53 from backing plate to backing plate

02-11-2006, 07:11 PM	#7
cell Active Member Join Date: Nov 2005 Location: Austin Posts: 217	Re: Anyone ever used another rear??? I have read that you can use the rear end off of an impala SS '94 through '96, which has disc brakes, and a 3.08 posi. The caprice cop cars had a similar beefy disc brake rear end, but it wasn't as wide as the SS rear end. This is what will be going in my truck (I will be putting in a cummins 4BT diesel engine with a tko-500 tranny. the 3.08 rear end with 29.5" tires will put me at 71 mph at torque peak (which is usually also the point of lowest brake specific fuel consumption) in 5th gear - perfect!). see impalassforum.com - they have a parts forum.

02-14-2006, 09:22 PM	#9
ClemsonChevy 8 vehicles only 4 that run Join Date: Feb 2006 Location: Clemson, SC Posts: 236	Re: Anyone ever used another rear??? TY, Ron! I'll measure the two in my trucks to see if theres a difference or if so how short the Maro/AMs Tran would be. __________________ 95 2500 350 w/ 3.73 72 GMC 1500 SWB stepside 65 Chevy C10 SWB stepside 72 Chevy C10 LWB fleetside

02-11-2006, 07:27 PM	#11
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Re: Anyone ever used another rear??? I put a Dana 60 rear into my 92 truck. A little fab work was required though. __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

02-14-2006, 08:03 PM	#12
Chevrolet4x4s Registered User Join Date: Nov 2005 Location: WV Posts: 227	Re: Anyone ever used another rear??? Just remember that some of the Camaro 10-bolts were 7.5 inch ring gear where as the truck(corprate)10-bolts were 8.5 inch ring gears Hope this helps, Shane __________________ 1993 K1500 350 5 speed 1985 K10 Silverado Vortec 406 5 speed (in body shop) "I been drivin' this '85 pickup truck Them buddies of mine call it a bucket of rust She's a little beat up but she still runs like the wind Yeah, kinda like me I been banged and bruisedBeen around the block a time or two But I'm runnin' like new goin' places I never been No, I ain't broke I'm just broken in" 1963 Dodge Townwagon(its amazng what 30 years and zero miles will do to a vehicle ) Member#20327



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.