1971 C-10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RyanG · 02-22-2006, 10:20 PM

I recently bauhgt a 71 Long Bed. I got to tearing apart the dash and found that the plastic piece attached to the gauges has a break in the copper. I have been trying to find one with no luck. Can any one tell me where to go for parts that are hard to find.

MDC · 02-22-2006, 10:23 PM

Welcome to the board. Any of the vendors here will have the printed circuit board

jsbgump · 02-22-2006, 10:28 PM

And welcome to the board

Quote:

Originally Posted by MDC

Welcome to the board. Any of the vendors here will have the printed circuit board

Longhorn Man · 02-22-2006, 10:24 PM

Do you have the guages or the dummy light set up?
PM sent.

Welcome to the board.

RyanG · 02-22-2006, 10:28 PM

I have all the gauges but I am not sure what you are saying about the dummy lights. I am waiting on the circuit board or what ever it is called so that I can put my dash back together.

RyanG · 02-22-2006, 10:29 PM

Thanks for the welcome fellas

truckguy1971 · 02-22-2006, 10:52 PM

nice truck, same one i have, mines got a motor swap too a oldsmobile 455

02-22-2006, 10:20 PM	#1
RyanG Registered User Join Date: Feb 2006 Location: Gilbert, Az Posts: 180	1971 C-10 I recently bauhgt a 71 Long Bed. I got to tearing apart the dash and found that the plastic piece attached to the gauges has a break in the copper. I have been trying to find one with no luck. Can any one tell me where to go for parts that are hard to find.

02-22-2006, 10:23 PM	#2
MDC Registered User Join Date: Oct 2005 Location: N Texas Posts: 727	Re: 1971 C-10 Welcome to the board. Any of the vendors here will have the printed circuit board __________________ 67 C10 Shortbed 327 05 F150 4x4 NO APPOLOGIES 's 02 Xpress X19 02 Yamaha VMax 150 www.xpressboats.com Nothing says 'poor craftmanship' like wrinkles in your duct tape

02-22-2006, 10:24 PM	#4
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: 1971 C-10 Do you have the guages or the dummy light set up? PM sent. Welcome to the board.

02-22-2006, 10:28 PM	#5
RyanG Registered User Join Date: Feb 2006 Location: Gilbert, Az Posts: 180	Re: 1971 C-10 I have all the gauges but I am not sure what you are saying about the dummy lights. I am waiting on the circuit board or what ever it is called so that I can put my dash back together.

02-22-2006, 10:29 PM	#6
RyanG Registered User Join Date: Feb 2006 Location: Gilbert, Az Posts: 180	Re: 1971 C-10 Thanks for the welcome fellas

02-22-2006, 10:52 PM	#7
truckguy1971 Registered User Join Date: Feb 2006 Location: Ontario, Canada Posts: 33	Re: 1971 C-10 nice truck, same one i have, mines got a motor swap too a oldsmobile 455 __________________ 1971 Chevrolet c10, 455 c.i.d. 1988 GMC c2500, 350 c.i.d. 2006 Honda Foreman 500



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.