Changing from a BBC to SBC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72armyswbtruck · 03-17-2006, 03:04 PM

OK, I am getting ready to put in a small block crate motor and want to use the newer style mounts and towers, What all will I have to do for this, Also I will be using a 400 tranny, Any suggestions? Thanks
Michael

*Billla* · 03-17-2006, 03:37 PM

Quote:

Originally Posted by 72armyswbtruck

OK, I am getting ready to put in a small block crate motor and want to use the newer style mounts and towers, What all will I have to do for this, Also I will be using a 400 tranny, Any suggestions? Thanks
Michael

I take it you sold your BBC? Man, I hated missing out on that

72armyswbtruck · 03-17-2006, 08:39 PM

Nope I still have it, don't worry, if the other guy doesn't buy it, I will still have it for a little while and YES IT IS STLL FOR SALE, check the for sale post.

corn · 03-17-2006, 08:50 PM

I had the 396 out of my '69 for a while & had a 350 in it with a 400th. It was a direct bolt in. I dont know anything about how exhaust manifolds fit because I was running chevelle headers...corn

72armyswbtruck · 03-17-2006, 08:58 PM

What about the drive shaft? And did you have to move the motor mounts forward or backwards? Did you use the newer style motor mounts?

corn · 03-17-2006, 10:38 PM

I pulled one engine out & bolted the other one in. Unbolted the motor mounts from the BBC, bolted them on SBC. Thats it...

low'n slow · 03-17-2006, 11:10 PM

I went the other way with my 78 K20. 350 to 454. required new exhaust head pipes and I had to lose the fan surround. I used the small block towers and mounts. Everything fit fine.

72armyswbtruck · 03-18-2006, 12:22 AM

Sweet, I think then that I might just keep these $200 set of 72 engine mounts and use them for the truck instead of selling them. I don't know though, $200 bones is $200 bones

HeavyD · 03-18-2006, 01:58 AM

Swap the mounts. Like you said they are worth something, and sb stands and mounts are dirt cheap. Use the extra $$ to buy other parts you need.

03-17-2006, 03:04 PM	#1
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Changing from a BBC to SBC OK, I am getting ready to put in a small block crate motor and want to use the newer style mounts and towers, What all will I have to do for this, Also I will be using a 400 tranny, Any suggestions? Thanks Michael __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

03-17-2006, 08:39 PM	#3
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: Changing from a BBC to SBC Nope I still have it, don't worry, if the other guy doesn't buy it, I will still have it for a little while and YES IT IS STLL FOR SALE, check the for sale post. __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

03-17-2006, 08:50 PM	#4
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Changing from a BBC to SBC I had the 396 out of my '69 for a while & had a 350 in it with a 400th. It was a direct bolt in. I dont know anything about how exhaust manifolds fit because I was running chevelle headers...corn

03-17-2006, 08:58 PM	#5
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: Changing from a BBC to SBC What about the drive shaft? And did you have to move the motor mounts forward or backwards? Did you use the newer style motor mounts? __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

03-17-2006, 10:38 PM	#6
corn Registered User Join Date: Dec 2003 Location: here Posts: 5,789	Re: Changing from a BBC to SBC I pulled one engine out & bolted the other one in. Unbolted the motor mounts from the BBC, bolted them on SBC. Thats it...

03-17-2006, 11:10 PM	#7
low'n slow Too Dumb To Know Better Join Date: Nov 2005 Location: Texas Posts: 882	Re: Changing from a BBC to SBC I went the other way with my 78 K20. 350 to 454. required new exhaust head pipes and I had to lose the fan surround. I used the small block towers and mounts. Everything fit fine.

03-18-2006, 12:22 AM	#8
72armyswbtruck Registered User Join Date: Feb 2004 Location: Idaho Posts: 4,034	Re: Changing from a BBC to SBC Sweet, I think then that I might just keep these $200 set of 72 engine mounts and use them for the truck instead of selling them. I don't know though, $200 bones is $200 bones __________________ "Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!"

03-18-2006, 01:58 AM	#9
HeavyD Senior Member Join Date: Sep 2004 Location: Wakaw, Sask, Canada Posts: 3,179	Re: Changing from a BBC to SBC Swap the mounts. Like you said they are worth something, and sb stands and mounts are dirt cheap. Use the extra $$ to buy other parts you need. __________________ "You can take the man out of PA, but you can't take PA out of the man"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.