Saw an S-10 pulling a 1967 fleetside - The 1947 - Present Chevrolet & GMC Truck Message Board Network

low'n slow · 03-26-2006, 10:54 PM

It was Friday night heading east from North Platte, Neb. Was making 80 mph. It was dark, so didn't get a good look at it.

mburgert · 03-26-2006, 11:14 PM

Quote:

Originally Posted by low'n slow

It was Friday night heading east from North Platte, Neb. Was making 80 mph. It was dark, so didn't get a good look at it.

Sounds like something us nebraskans would do

1967k30 · 03-26-2006, 11:58 PM

Quote:

Originally Posted by mburgert

Sounds like something us nebraskans would do

It does doesn't it. Like racing a ricer in my D-Max with a trailer in tow.

al's71gmc · 03-26-2006, 11:43 PM

Are you sure the 67 wasn't pushing the s10? LOL

69face · 03-26-2006, 11:54 PM

believe it or not i pulled a 1987 3/4 suburban with my 305v8 81 el camino. people were stopping and cheering me on. lol!

wibilly · 03-27-2006, 12:57 AM

i once seen i chrysler mini van pulling a large skidsteer. only in wisconson would you see somthing like that

qksilver · 03-27-2006, 09:22 PM

Don't forget NC, and some parts of tenn, kentucky and west Virginia!
Get er done!

**Palf70Step** · 03-27-2006, 09:53 PM

If the s10 was a 4.3, it'll pull quite a bit. Of course wether I clain Mississippi or my original home of Pennsylvania, we all have crazy folks that do things like that. I have see much worse combos (even some that I didn't have nothing to do with

)

muddyole 69 · 03-27-2006, 10:21 PM

pulled an 80 mailbu with the s10 that belonged to my brother had to make a panic stop the dolly jack knifed and redecorated the bedide in a big way with the bumper of the mali ouch !!! never pull that stunt again

later Mike

68gmcdually · 03-27-2006, 10:33 PM

Geez, I used my '90 S-15 4.3l today for a dump run, had a little over 500 kgs on the trailer (approx. 1,100 lbs.) and that was enough of a load for it. Lots of power just short in the braking, suspension dept.

Chevrolet4x4s · 03-27-2006, 10:38 PM

Or it could have been like the black s-10 around here with the Corvette 350
Shane

....It Is West Virginia after all

northcountry67 · 03-27-2006, 10:49 PM

Maybe the S-10 was a 3/4 ton with a V8, lol

chevymad · 03-28-2006, 12:40 AM

I once saw a chrysler minivan pulling a 3 axle equipment trailer(like my dad's weighs 3500lbs) with an 84 or so ford F250 4x4 diesel on top of it. The whole mess was heading south on I5.. Scared the hell outa me..

edmonton72 · 03-28-2006, 02:59 AM

my dad had a 1997 cheyenne 1500 with a 4.3, 5-speed, 3.42 rear end and it towed a 30ft trailer that weighed 4000-5000lbs pretty good. those 4.3s are pretty good motors, just a 350 with 2 cylinders chopped off. My dad sold that truck to my cousin and im going to be driving that truck this summer, YEAH!

03-26-2006, 10:54 PM	#1
low'n slow Too Dumb To Know Better Join Date: Nov 2005 Location: Texas Posts: 883	Saw an S-10 pulling a 1967 fleetside It was Friday night heading east from North Platte, Neb. Was making 80 mph. It was dark, so didn't get a good look at it.

03-26-2006, 11:43 PM	#4
al's71gmc 4 eyed fever Join Date: Jul 2005 Location: Eureka, Nevada Posts: 500	Re: Saw an S-10 pulling a 1967 fleetside Are you sure the 67 wasn't pushing the s10? LOL __________________ 1971 GMC 2500 4x4 1972 GMC Sierra Grande 1/2 t 4x4-#1 son's truck. Recently completed resto. 4 YO daughter," Daddy, I like your truck better than Mom's." (2000 F350-ranch truck) Smart kid!!

03-26-2006, 11:54 PM	#5
69face Registered User Join Date: Feb 2006 Location: northridge Posts: 534	Re: Saw an S-10 pulling a 1967 fleetside believe it or not i pulled a 1987 3/4 suburban with my 305v8 81 el camino. people were stopping and cheering me on. lol!

03-27-2006, 12:57 AM	#6
wibilly Senior Member Join Date: Nov 2005 Location: northwestern wi Posts: 2,111	Re: Saw an S-10 pulling a 1967 fleetside i once seen i chrysler mini van pulling a large skidsteer. only in wisconson would you see somthing like that __________________ common sense isn't so common anymore

03-27-2006, 09:22 PM	#7
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: Saw an S-10 pulling a 1967 fleetside Don't forget NC, and some parts of tenn, kentucky and west Virginia! Get er done!

03-27-2006, 09:53 PM	#8
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,249	Re: Saw an S-10 pulling a 1967 fleetside If the s10 was a 4.3, it'll pull quite a bit. Of course wether I clain Mississippi or my original home of Pennsylvania, we all have crazy folks that do things like that. I have see much worse combos (even some that I didn't have nothing to do with ) __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

03-27-2006, 10:21 PM	#9
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: Saw an S-10 pulling a 1967 fleetside pulled an 80 mailbu with the s10 that belonged to my brother had to make a panic stop the dolly jack knifed and redecorated the bedide in a big way with the bumper of the mali ouch !!! never pull that stunt again later Mike __________________ hav'n fun be'n me Last edited by muddyole 69; 03-27-2006 at 10:22 PM.

03-27-2006, 10:33 PM	#10
68gmcdually Registered User Join Date: Feb 2004 Location: Fenelon Falls, ON Canada Posts: 1,454	Re: Saw an S-10 pulling a 1967 fleetside Geez, I used my '90 S-15 4.3l today for a dump run, had a little over 500 kgs on the trailer (approx. 1,100 lbs.) and that was enough of a load for it. Lots of power just short in the braking, suspension dept. __________________ James Bellwood 1968 930 Extend-A-Cab Dually 5.7l, 5 speed,

03-27-2006, 10:38 PM	#11
Chevrolet4x4s Registered User Join Date: Nov 2005 Location: WV Posts: 227	Re: Saw an S-10 pulling a 1967 fleetside Or it could have been like the black s-10 around here with the Corvette 350 Shane ....It Is West Virginia after all __________________ 1993 K1500 350 5 speed 1985 K10 Silverado Vortec 406 5 speed (in body shop) "I been drivin' this '85 pickup truck Them buddies of mine call it a bucket of rust She's a little beat up but she still runs like the wind Yeah, kinda like me I been banged and bruisedBeen around the block a time or two But I'm runnin' like new goin' places I never been No, I ain't broke I'm just broken in" 1963 Dodge Townwagon(its amazng what 30 years and zero miles will do to a vehicle ) Member#20327

03-27-2006, 10:49 PM	#12
northcountry67 Registered User Join Date: Dec 2005 Location: Lengby, Minnesota Posts: 225	Re: Saw an S-10 pulling a 1967 fleetside Maybe the S-10 was a 3/4 ton with a V8, lol

03-28-2006, 12:40 AM	#13
chevymad Registered User Join Date: Jan 2001 Location: skamokawa, WA, USA Posts: 527	Re: Saw an S-10 pulling a 1967 fleetside I once saw a chrysler minivan pulling a 3 axle equipment trailer(like my dad's weighs 3500lbs) with an 84 or so ford F250 4x4 diesel on top of it. The whole mess was heading south on I5.. Scared the hell outa me.. __________________ 70 C10 long fleet, 355/200 4r, 6 lug disc conversion, 3" drop 70 gmc changed to 67/8 chevy, 454 with voodoo cam, th400, all 74 running gear.. in progress

03-28-2006, 02:59 AM	#14
edmonton72 Nothings as cool as my 72 Join Date: May 2005 Location: Edmonton, AB, Kanuckastan Posts: 181	Re: Saw an S-10 pulling a 1967 fleetside my dad had a 1997 cheyenne 1500 with a 4.3, 5-speed, 3.42 rear end and it towed a 30ft trailer that weighed 4000-5000lbs pretty good. those 4.3s are pretty good motors, just a 350 with 2 cylinders chopped off. My dad sold that truck to my cousin and im going to be driving that truck this summer, YEAH! __________________ 1972 C10 Longbox In the middle of body off restoration Rebuilt 355, turbo 400, 3.42 12-bolt Rolling chassis finally done and cab mounted. Now onto sanding, bondo and more sanding.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.