Why is my truck sitting so high? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69ride · 03-27-2006, 02:19 PM

What the heck? After I put stock springs back I the front end of the truck it now sits at 33.5". The springs seem to be sittin in the holders correct. According to LMC the truck should be at 32". Would the back being still at the lowered height affect this. The back is at 31" because I haven't had time to put the stock springs back in. Why is the front so high or is it?

*rage'nrat638* · 03-27-2006, 03:56 PM

well most springs take a set after a few months.just call them and make sure you got the correct number..

67ChevyRedneck · 03-27-2006, 04:00 PM

What size tire are you running? It's easy to pick up an extra 1 1/2" if the tires you are using are taller than the one's LMC is using to figure the height with. I don't have the catalog here at work, but I think they list the tire size they are using. My guess is that your tire size is larger than theirs

Also, rage,nrat is right, drive it around for a bit and they will most likely settle a 1/2 or so.

69ride · 03-27-2006, 04:07 PM

They tires are either 265 or 275/60/15. The springs were out of a scrapped truck so they should be settled. Is there a HD spring that wouldn't squat as much maybe this is what I got from the junker.

67ChevyRedneck · 03-27-2006, 04:18 PM

I put V-8 springs in my 67 out of a 71GMC (I think they had 1 more coil over the ones in my truck) but I didn't notice any difference in ride height (I also put a V-8 engine in my truck). I went to the LMC website and they didn't list a tire size (I thought they did

) but they show the back sitting 2" higher than the front. Get your rear springs in and see if the difference is about 2". with these old trucks nothing will be perfect.

BowTieMan · 03-27-2006, 06:10 PM

I have HD coils in my 70 c/10 and it sits as high as the 3/4 ton 72 in the parking lot at school. And with the engine out my truck raised about an inch at the most.

rigon4 · 03-27-2006, 06:22 PM

I know that a 1969 with stock V-8 has 19 loops and a 1971 with stock I-6 has 22 loops so I would look into something like that.

Longhorn Man · 03-27-2006, 06:50 PM

your springs will still settle. They are setteling into the pockets.

**special-K** · 03-28-2006, 09:08 AM

Coil springs vary....

03-27-2006, 02:19 PM	#1
69ride All Go, No Show Join Date: Jul 2003 Location: Creighton SK Posts: 286	Why is my truck sitting so high? What the heck? After I put stock springs back I the front end of the truck it now sits at 33.5". The springs seem to be sittin in the holders correct. According to LMC the truck should be at 32". Would the back being still at the lowered height affect this. The back is at 31" because I haven't had time to put the stock springs back in. Why is the front so high or is it? __________________ 69 LWB Rebuilt 283, aluminum intake, edelbrock carb, Mild Melling Cam, HEI.

03-27-2006, 03:56 PM	#2
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: Why is my truck sitting so high? well most springs take a set after a few months.just call them and make sure you got the correct number.. Last edited by rage'nrat638; 03-27-2006 at 03:58 PM.

03-27-2006, 04:00 PM	#3
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Why is my truck sitting so high? What size tire are you running? It's easy to pick up an extra 1 1/2" if the tires you are using are taller than the one's LMC is using to figure the height with. I don't have the catalog here at work, but I think they list the tire size they are using. My guess is that your tire size is larger than theirs Also, rage,nrat is right, drive it around for a bit and they will most likely settle a 1/2 or so. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 03-27-2006 at 04:02 PM.

03-27-2006, 04:07 PM	#4
69ride All Go, No Show Join Date: Jul 2003 Location: Creighton SK Posts: 286	Re: Why is my truck sitting so high? They tires are either 265 or 275/60/15. The springs were out of a scrapped truck so they should be settled. Is there a HD spring that wouldn't squat as much maybe this is what I got from the junker. __________________ 69 LWB Rebuilt 283, aluminum intake, edelbrock carb, Mild Melling Cam, HEI. Last edited by 69ride; 03-27-2006 at 04:07 PM.

03-27-2006, 04:18 PM	#5
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: Why is my truck sitting so high? I put V-8 springs in my 67 out of a 71GMC (I think they had 1 more coil over the ones in my truck) but I didn't notice any difference in ride height (I also put a V-8 engine in my truck). I went to the LMC website and they didn't list a tire size (I thought they did ) but they show the back sitting 2" higher than the front. Get your rear springs in and see if the difference is about 2". with these old trucks nothing will be perfect. __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications!

03-27-2006, 06:10 PM	#6
BowTieMan Registered User Join Date: Dec 2003 Location: Glendale Arizona Posts: 747	Re: Why is my truck sitting so high? I have HD coils in my 70 c/10 and it sits as high as the 3/4 ton 72 in the parking lot at school. And with the engine out my truck raised about an inch at the most. __________________ "A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo

03-27-2006, 06:22 PM	#7
rigon4 Registered User Join Date: Mar 2006 Location: east syracuse ny Posts: 371	Re: Why is my truck sitting so high? I know that a 1969 with stock V-8 has 19 loops and a 1971 with stock I-6 has 22 loops so I would look into something like that.

03-27-2006, 06:50 PM	#8
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	Re: Why is my truck sitting so high? your springs will still settle. They are setteling into the pockets.

03-28-2006, 09:08 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Why is my truck sitting so high? Coil springs vary.... __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.