![]() |
|
![]() |
#1 |
Registered User
Join Date: Mar 2004
Location: Aviano, Italy
Posts: 221
|
Front end components
The time has come to do my front end rebuild. Kit or single part buy? Brand? Anybody use the Autozone Duralast stuff?
How about a new P/S box? I'd like something a little quicker. |
![]() |
![]() |
![]() |
#2 |
Senior Member
![]() Join Date: Mar 2001
Location: Cedar Park, TX
Posts: 686
|
Re: Front end components
Might want to stick to MOOG parts...there are two lines of these. autozone sells the cheaper version. They have nylon internals (I would stay away from these) and get the upper end version, at least if you plan to keep the truck more than a year. As far as a quicker ratio PS box...AGR makes a very nice unit.
__________________
71 Chevy C-10 SWB Fleetside RamJet-350/4L60e & Compushift/3.73Posi See it at www.prismnet.com/~grzanich |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Dec 2004
Location: Southern Pines NC
Posts: 3,853
|
Re: Front end components
I agree, the price difference isn't that much. The higher quality ones will save you down the road.........if you keep it greased
|
![]() |
![]() |
![]() |
#4 |
Registered User
Join Date: Mar 2004
Location: Aviano, Italy
Posts: 221
|
Re: Front end components
Anybody use the www.espo.com stuff? I agree about using the upper end stuff. I see kits for around $325 or so and can't believe it is upper end Moog.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Apr 2005
Location: metro Phoenix, AZ
Posts: 241
|
Re: Front end components
Howdy:
Just did a major front end refit myself late in '05. Locally, shopped at Advance Auto Parts, bought mostly TRW/ Federal Mogul, had maybe a couple of Moog($$$) pieces. Didn't have to wait more than 24hrs for any of the parts to arrive at my local store. Will post again in around 20 years (if I remember) to let you all know how the replacement parts held up. cowboy33713 |
![]() |
![]() |
![]() |
#6 |
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,738
|
Re: Front end components
I used the front end rebuild kit from www.p-s-t.com for my project. Shipped to my door for $190 or so
![]() |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Mar 2005
Location: Arizona
Posts: 260
|
Re: Front end components
What all was included in the P S T package for $190? Online it does not say exactly, or at least it did not show on my computer.
__________________
65 SWB 454 350T |
![]() |
![]() |
![]() |
#8 |
Registered User
![]() Join Date: Feb 2004
Location: Idaho
Posts: 4,034
|
Re: Front end components
HMN, $200 bucks for all those components? I just might have to jump on that
__________________
"Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!" |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Mar 2004
Location: Aviano, Italy
Posts: 221
|
Re: Front end components
I see that deal as well. Any name on the components? Generic? I am curious what they use at Espo and P-S-T.
|
![]() |
![]() |
![]() |
#10 |
67 is sold
Join Date: Apr 2001
Location: Troy, Michigan
Posts: 6,738
|
Re: Front end components
PST uses a few different brands, give them a call, they have excellent customer service. I'm sure if you want MOOG it will cost you more then that.
My kit included a full set of rubber bushings, inner tie rods (I added outers I believe), nuts & pins. I also bought their sway bar bushings and poly rear trailing arms bushings. That kit came with everything but the tie rod sleeves for some reason, I picked them up at the local auto parts store.
__________________
Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member Last edited by Joe67; 04-10-2006 at 07:26 AM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|