![]() |
|
![]() |
#1 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
![]()
In looking at a 69 C-10 short bed I noticed that there were holes in the frame that I had not seen in other truck frames. There are two 1" holes on each frame rail and they are located toward the front part of the frame. The punched holes are at the e-brake rod location, (one on each side of the the rod mounting dimple) on the passengers side. There is a duplicate pair of holes on the driver's side and there is a dimple similiar to the e-brake rod mounting as on the pasenger's side.
Anyone know what they are for? They look like factory holes. Jim Last edited by JimKshortstep4x4; 04-09-2006 at 05:40 AM. |
![]() |
![]() |
![]() |
#2 |
Registered User
![]() Join Date: Feb 2004
Location: Idaho
Posts: 4,034
|
Re: Frame holes
Check some of the earlier post there was a diagram posted with the frame and hole locations
__________________
"Remember, They can Kill You, but they can't eat You, That's against the law!!!!!!!!!" |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
Re: Frame holes
Thanks for the reply.
These holes are not in any of our (10) trucks and they don't show up on the frame prints in the Assembly Manual. They definitely appear to be factory punched and I am wondering if they were fixturing holes for subsequent operations on the rails. Jim |
![]() |
![]() |
![]() |
#4 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,923
|
Re: Frame holes
got any pictures. I am curious. I have some holes around where my emergency brake cables go through the frame rails, but not sure which ones you are talking about.
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Feb 2006
Location: Lilburn Georgia
Posts: 1,240
|
Re: Frame holes
it sounds like a 4x4 frame and the holes are for the hangers and the dimples are for the shock mounts post some pictures and someone will verify Mike
|
![]() |
![]() |
![]() |
#6 |
The LuvShack Garage
Join Date: Jan 2004
Location: Maple Grove, TN (West Side)
Posts: 30,477
|
Re: Frame holes
![]() ![]()
__________________
Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
![]()
I will try to come up with a picture!
The truck is 50 miles away so it may be a few days before I can get to it. Jim |
![]() |
![]() |
![]() |
Bookmarks |
|
|