The NO dash pad all steel look - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*wolfthing2000* · 04-13-2006, 11:21 PM

I know someone out there has prolly done this, so haow about opinions on the dash with out it's pad with maybe filled in lightening holes ( I guess that' s ehat they must be for lack of any other terms) I think it might look cool butnhas anyone done it??

*wolfthing2000* · 04-13-2006, 11:24 PM

Any pictures are greatly appreciated.

Thank you.

*wolfthing2000* · 04-14-2006, 09:24 AM

ttt

TravisH · 04-14-2006, 09:25 AM

I've welded up the holes but the work is still in progress. no pics though

petsudeh · 04-14-2006, 09:53 AM

Ive seen an all steel dash that was rounded in the same shape as the original dash. Looked very cool

*wolfthing2000* · 04-14-2006, 11:14 AM

aNY PICS ANYONE??????

*wolfthing2000* · 04-14-2006, 12:08 PM

ttt

ChevLoRay · 04-14-2006, 12:30 PM

Not that I plan to run into anything with my truck, but from experience I can testify that any padding on the leading edge of the dash is waaaaaaay better than no padding at all. I will grant that it can look nice, if done properly. But, the experience side of me can recall that a friend of mine, whose nearly-new '65 SS Impala was propelled into the rear end of my '54 Ford, and who subsequently had 11 of his front teeth broken off flush with the gums, would say to leave the dash pad. His replacement '65 SS had a padded dash. Oh, he got between his girlfriend and SHE helped to drive his open mouth onto the dash. I have no idea what he might have been trying to say, unless "Oh......" was starting to come out of his mouth. Never did ask him about that part.

Do what you like...it's your truck.

*wolfthing2000* · 04-14-2006, 02:07 PM

any pics????

**Bowtie468** · 04-14-2006, 03:39 PM

Hey Wolfthing, i have been entertaining the thought myself. I think it looks pretty cool, myself !!

*wolfthing2000* · 04-14-2006, 04:40 PM

ttt

Joe67 · 04-14-2006, 04:40 PM

I like that look too.
There were some pics in this thread:
http://67-72chevytrucks.com/vboard/s...d.php?t=117382

*wolfthing2000* · 04-14-2006, 11:21 PM

The only pics I could glean from that link were the 2 tone red and that is it the others won't come up. any more pics are appreciated. I don't realy care for the lightening hole look.

I need a beer!

woodridge · 04-14-2006, 11:33 PM

How about this?

*wolfthing2000* · 04-14-2006, 11:36 PM

Not exactly what I had in mind, but that is exactly cool for sure!!!!

woodridge · 04-14-2006, 11:42 PM

The guy that owns this truck said he changes the dash in every thing he's ever built. Not what I would do but it is kinda cool.

Rollie396 · 04-14-2006, 11:57 PM

I think it'd look great!Just do it.If it doesn't look like you expected,then put a pad on.simple.

*wolfthing2000* · 04-15-2006, 08:17 AM

And there you have it!

LUV2XCLR8 · 04-15-2006, 08:25 AM

I would like to see one w/ the holes filled in myself

1LoC10 · 04-15-2006, 09:13 AM

heres a couple

JAKES 68GMC · 04-15-2006, 09:57 AM

There's a dash you don't see every day.

FRENCHBLUE72 · 04-15-2006, 04:26 PM

How far along is that right hand drive truck????? Hey ken why didnt you plug all the holes??

1LoC10 · 04-15-2006, 07:11 PM

Quote:

Originally Posted by FRENCHBLUE72

How far along is that right hand drive truck????? Hey ken why didnt you plug all the holes??

i think he just swapped the gove box and bezel just for the hell of it.. i could be wrong though.. but it still has the pedals on the correct side

04-13-2006, 11:21 PM	#1
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	The NO dash pad all steel look I know someone out there has prolly done this, so haow about opinions on the dash with out it's pad with maybe filled in lightening holes ( I guess that' s ehat they must be for lack of any other terms) I think it might look cool butnhas anyone done it??

04-13-2006, 11:24 PM	#2
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Re: The NO dash pad all steel look Any pictures are greatly appreciated. Thank you.

04-14-2006, 09:24 AM	#3
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Re: The NO dash pad all steel look ttt

04-14-2006, 09:25 AM	#4
TravisH Registered User Join Date: Mar 2005 Location: Alberta Posts: 316	Re: The NO dash pad all steel look I've welded up the holes but the work is still in progress. no pics though

04-14-2006, 09:53 AM	#5
petsudeh Registered User Join Date: Mar 2006 Location: New Mexico Posts: 17	Re: The NO dash pad all steel look Ive seen an all steel dash that was rounded in the same shape as the original dash. Looked very cool

04-14-2006, 11:14 AM	#6
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Re: The NO dash pad all steel look aNY PICS ANYONE??????

04-14-2006, 12:08 PM	#7
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Re: The NO dash pad all steel look ttt

04-14-2006, 12:30 PM	#8
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: The NO dash pad all steel look Not that I plan to run into anything with my truck, but from experience I can testify that any padding on the leading edge of the dash is waaaaaaay better than no padding at all. I will grant that it can look nice, if done properly. But, the experience side of me can recall that a friend of mine, whose nearly-new '65 SS Impala was propelled into the rear end of my '54 Ford, and who subsequently had 11 of his front teeth broken off flush with the gums, would say to leave the dash pad. His replacement '65 SS had a padded dash. Oh, he got between his girlfriend and SHE helped to drive his open mouth onto the dash. I have no idea what he might have been trying to say, unless "Oh......" was starting to come out of his mouth. Never did ask him about that part. Do what you like...it's your truck. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

04-14-2006, 02:07 PM	#9
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Re: The NO dash pad all steel look any pics????

04-14-2006, 03:39 PM	#10
Bowtie468 Senior Member Join Date: Jun 2002 Location: Cecilia, Louisiana Posts: 1,638	Re: The NO dash pad all steel look Hey Wolfthing, i have been entertaining the thought myself. I think it looks pretty cool, myself !! __________________ Chris click here to see my buildpage http://67-72chevytrucks.com/vboard/s...d.php?t=394656 ---------------------------------- 1979 C10 Silverado Big10 SWB Factory 454/400 Cardinal Red/Santa Fe Tan (original paint) 1969 Camaro X44 LS swap 1968 C10 SWB Fleetside (SOLD) 468BBC MultiPort TPI / Dynamic EFI P4 Black/Black 1963 Nova SS convertible (SOLD) 194 I6/ PowerGlide

04-14-2006, 04:40 PM	#11
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Re: The NO dash pad all steel look ttt

04-14-2006, 04:40 PM	#12
Joe67 67 is sold Join Date: Apr 2001 Location: Troy, Michigan Posts: 6,738	Re: The NO dash pad all steel look I like that look too. There were some pics in this thread: http://67-72chevytrucks.com/vboard/s...d.php?t=117382 __________________ Joe - Formerly 67c10step ------------------------------- 1967 Chevy Stepside - ECE 4/6, fuelcell, 5lug - SOLD gr8lakes - My ebay auctions Click here to order forum apparel :: Click here to become a subscribing member

04-14-2006, 11:21 PM	#13
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Re: The NO dash pad all steel look The only pics I could glean from that link were the 2 tone red and that is it the others won't come up. any more pics are appreciated. I don't realy care for the lightening hole look. I need a beer!

04-14-2006, 11:33 PM	#14
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: The NO dash pad all steel look How about this? Attached Images __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

04-14-2006, 11:36 PM	#15
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Re: The NO dash pad all steel look Not exactly what I had in mind, but that is exactly cool for sure!!!!



Register or Log In To remove these advertisements.

04-14-2006, 11:42 PM	#16
woodridge Senior Member Join Date: Feb 2005 Location: Maynardville, Tn Posts: 3,030	Re: The NO dash pad all steel look The guy that owns this truck said he changes the dash in every thing he's ever built. Not what I would do but it is kinda cool. __________________ SEMA Network- Protect our Hobby! 71 C30 in pieces, starting to come together. Click here for A Place For Tennessee Truck Enthusiest To Meet

04-14-2006, 11:57 PM	#17
Rollie396 someday it will be done! Join Date: Sep 2004 Location: Lloydminster,AB. Canada Posts: 1,620	Re: The NO dash pad all steel look I think it'd look great!Just do it.If it doesn't look like you expected,then put a pad on.simple. __________________ '72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics

04-15-2006, 08:17 AM	#18
wolfthing2000 Account Suspended Join Date: Oct 2004 Posts: 1,276	Re: The NO dash pad all steel look And there you have it!

04-15-2006, 08:25 AM	#19
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,484	Re: The NO dash pad all steel look I would like to see one w/ the holes filled in myself __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Tow Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

04-15-2006, 09:13 AM	#20
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: The NO dash pad all steel look heres a couple __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

04-15-2006, 09:57 AM	#21
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,212	Re: The NO dash pad all steel look There's a dash you don't see every day.

04-15-2006, 04:26 PM	#22
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,608	Re: The NO dash pad all steel look How far along is that right hand drive truck????? Hey ken why didnt you plug all the holes?? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Register or Log In To remove these advertisements.