Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
04-19-2006, 10:43 PM | #1 |
short sell Ford stock
Join Date: Aug 2005
Location: Houston, Texas
Posts: 104
|
Replacing the rubber dust boots on my ball joints
I used a pickle fork to take my front drum brake spindles off and i ruined the rubber part of the ball joints. I was wondering if i could just replace those and it will be fine. I would replace the ball joints but haveing them pressed in and grinding the old rivets out seems like too much work to replace a perfectly good ball joint. Suggestions please. thanks.,
|
04-19-2006, 10:46 PM | #2 |
User #12137
Join Date: Apr 2004
Location: kingsport,upper east tenn
Posts: 11,598
|
Re: Replacing the rubber dust boots on my ball joints
if ya got a napa local they should have just the rubber part ya need and yes you can just replace the rubber part of it
|
04-19-2006, 10:55 PM | #3 |
Cantankerous Geezer
Join Date: Aug 2002
Location: Bel Aire, KS
Posts: 6,264
|
Re: Replacing the rubber dust boots on my ball joints
You can usually find them in the Help section at a parts store. Help is now a name brand of general replacement parts.
__________________
Fred There is no such thing as too much cam...just not enough engine. |
04-19-2006, 11:24 PM | #4 |
18 Till I Die
Join Date: Mar 2005
Location: Alberta, Canada
Posts: 1,522
|
Re: Replacing the rubber dust boots on my ball joints
Energy Suspension has them in red if you want to get fancy.
__________________
2011 GMC Acadia 1969 GMC BBC LS7 2007 GMC Crew Duramax 1987 Camaro Iroc 350 Tuned Port Injection 42000Km 1987 Chevrolet Silverado 350 TBI 1987 Chevrolet Silverado 350 TBI(yes 2) Take me drunk, I'm too home... |
Bookmarks |
|
|