Magna Flow Exaust - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72CKBURB · 04-26-2006, 08:51 PM

Is anybody running this exaust yet? I just got mine today. Was wondering how you like it, and how the fit and install went? What did you pay for it? Got mine for $420. Seemed like a good deal.

jamesi20 · 04-26-2006, 09:39 PM

I have the same kit...haven't done the install yet but have magnaflow on my rumble bee and they sound great...just a deep rumble no "cackle" like some others I have heard

roughedup72 · 04-26-2006, 10:42 PM

thats sweet. Where did you get from and will it fit a longbed?

72CKBURB · 04-26-2006, 11:16 PM

Quote:

Originally Posted by roughedup72

thats sweet. Where did you get from and will it fit a longbed?

I got it off of ebay. I think the guy will take $400 shipped. It says it will fit a c20.
http://cgi.ebay.com/ebaymotors/66-72...spagenameZWDVW

mplex2000 · 04-26-2006, 11:39 PM

Seems pretty cheap if it's all stainless - is it?

72CKBURB · 04-26-2006, 11:43 PM

Quote:

Originally Posted by mplex2000

Seems pretty cheap if it's all stainless - is it?

Thats what Magna Flow says. stainless. I will take a magnet to it tomorrow and see.

mplex2000 · 04-26-2006, 11:50 PM

I've always used their mufflers but have always fabbed my own exhausts. That's sweet if it is!

*bskylerj* · 04-27-2006, 01:46 AM

The pictures look like the mufflers and the pipes are polished. did they arrive to you all polished?????

72CKBURB · 04-27-2006, 10:08 AM

Quote:

Originally Posted by bskylerj

The pictures look like the mufflers and the pipes are polished. did they arrive to you all polished?????

Just the mufflers are polished. I think I will try and polish the pipes up a little before I put it on.

1LoC10 · 04-27-2006, 01:53 AM

Looks awesome, anyway to get a sound clip when you get it on?
LMC has that kit
http://www.lmctruck.com/icatalog/cb/0095.html

72CKBURB · 04-27-2006, 10:09 AM

Quote:

Originally Posted by 1LoC10

Looks awesome, anyway to get a sound clip when you get it on?
LMC has that kit
http://www.lmctruck.com/icatalog/cb/0095.html

I will try and get a sound clip. It will be going behind a LT1 so I hope it sounds pretty good.

ChevyDude · 04-27-2006, 10:26 AM

Looks great...love to hear about the fit!

vfx3dartist · 04-27-2006, 02:45 PM

That looks great! Are you running headers? I would like to get the same setup, but currently I'm all stock...wondering how it will hook up.

-jOe

72CKBURB · 04-27-2006, 10:04 PM

Quote:

Originally Posted by vfx3dartist

That looks great! Are you running headers? I would like to get the same setup, but currently I'm all stock...wondering how it will hook up.

-jOe

I am running some shorties, looking for some long tubes that will fit.

jamesi20 · 04-27-2006, 09:06 PM

they advertise them as stainless but it can't be too much stainless or a real low grade stainless as a magnet sticks to them pretty good

72CKBURB · 04-27-2006, 10:09 PM

Quote:

Originally Posted by jamesi20

they advertise them as stainless but it can't be too much stainless or a real low grade stainless as a magnet sticks to them pretty good

Yup

took a magnet to them today. Stuck like glue. I have a Borla exhaust on my camaro. It is high quality no magnet is stickin to it. Magna flow does say stainless on there site as well but not what kind though. I will just have to see how well it holds up. For the price I am still happy though. And it should still last and look better than the steel pipes.

**Bowtie468** · 04-27-2006, 10:51 PM

Quote:

Originally Posted by 72CKBURB

Yup

took a magnet to them today. Stuck like glue. I have a Borla exhaust on my camaro. It is high quality no magnet is stickin to it. Magna flow does say stainless on there site as well but not what kind though. I will just have to see how well it holds up. For the price I am still happy though. And it should still last and look better than the steel pipes.

It is a complete stainless system, as they advertise. Just different grades of steel.Mufflers should be 304 stainless. The tubing you have there is 409 stainless, which has a much higher metallic content. Thats why the magnet stuck like glue to it. You're still much better off than an aluminized mild steel system A complete 304 stainless system would probably run around $ 800-1000.

FRENCHBLUE72 · 04-27-2006, 10:05 PM

I had magnaflows on my 350 and dumped them for flows they had a wierd dunk dunk dunk noise at certian rpms..

epthree04 · 04-27-2006, 10:38 PM

yeah magnaflows sound good if there is an xpipe. magnaflows straight through sound like crap imo. thats why im going with flowmaster but if i were doing an xpipe, hpipe, etc i would choose magnaflow for sure!

mplex2000 · 04-29-2006, 10:39 AM

Looks like I won't be buying that one then. I can do one in all 304 for a little less, including using their x pipe and stainless header reducers. Can't decide if I want to dump in front of axle or get some nice tips and go out in front of the rear wheels..

I've always liked the magnaflow ovals, has anyone used the round ones? Looking at the 6 inch diameter in either 14 or 16 inch length.

I want some good noise, but not a rediculous amount..

MACO · 04-29-2006, 12:50 PM

I have a Magnaflow system on order and it should be here next week. I will be installing it on my truck with a new set of Hooker headers. I am interested to see how it fits and sounds.

4x4Poet · 05-01-2006, 08:31 AM

You could have the pipes locally ceramic powder coated for ~100. Do it in high luster silver and it will look great, emit less heat, and not rust unless scratched.

vfx3dartist · 05-17-2006, 04:54 PM

Hey Guys - Any updates on the installs?

-j

**53burb** · 05-19-2006, 05:25 AM

Classic Trucks or Custom Classic Trucks has a feature on this exhaust system featured in this months magazine. I will try to get a link later.

vfx3dartist · 05-23-2006, 09:36 PM

Found the classic trucks install online...seems pretty cool, but the headers are a bit pricey. I'm sure they are worth it though.

http://classictrucks.com/tech/0607cl..._installation/

-j

04-26-2006, 08:51 PM	#1
72CKBURB Registered User Join Date: Nov 2005 Location: Utah Posts: 9	Magna Flow Exaust Is anybody running this exaust yet? I just got mine today. Was wondering how you like it, and how the fit and install went? What did you pay for it? Got mine for $420. Seemed like a good deal. Attached Images

04-26-2006, 09:39 PM	#2
jamesi20 Senior Member Join Date: May 2002 Location: NORTHEAST OHIO Posts: 493	Re: Magna Flow Exaust I have the same kit...haven't done the install yet but have magnaflow on my rumble bee and they sound great...just a deep rumble no "cackle" like some others I have heard

04-26-2006, 10:42 PM	#3
roughedup72 Senior Member Join Date: Oct 2005 Location: south carolina Posts: 658	Re: Magna Flow Exaust thats sweet. Where did you get from and will it fit a longbed? __________________ 1972 chevy cheyenne 10,nothing special at the moment,Its a work in progress, Working on the engine, paint and body,engine, paint and body,now its the suspenion, ahh hell I'm about tired of working on it. Maybe it will be a rat rod.

04-26-2006, 11:39 PM	#5
mplex2000 Registered User Join Date: Jul 2005 Location: DFW Posts: 463	Re: Magna Flow Exaust Seems pretty cheap if it's all stainless - is it?

04-26-2006, 11:50 PM	#7
mplex2000 Registered User Join Date: Jul 2005 Location: DFW Posts: 463	Re: Magna Flow Exaust I've always used their mufflers but have always fabbed my own exhausts. That's sweet if it is!

04-27-2006, 01:46 AM	#8
bskylerj Account Suspended Join Date: Dec 2005 Location: SPOKANE, WASHINGTON Posts: 1,001	Re: Magna Flow Exaust The pictures look like the mufflers and the pipes are polished. did they arrive to you all polished?????

04-27-2006, 01:53 AM	#10
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: Magna Flow Exaust Looks awesome, anyway to get a sound clip when you get it on? LMC has that kit http://www.lmctruck.com/icatalog/cb/0095.html __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

04-27-2006, 10:26 AM	#12
ChevyDude Senior Member Join Date: Jun 2003 Location: Westminster, CO Posts: 3,071	Re: Magna Flow Exaust Looks great...love to hear about the fit!

04-27-2006, 02:45 PM	#13
vfx3dartist Registered User Join Date: Nov 2005 Location: San Diego Posts: 22	Re: Magna Flow Exaust That looks great! Are you running headers? I would like to get the same setup, but currently I'm all stock...wondering how it will hook up. -jOe

04-27-2006, 09:06 PM	#15
jamesi20 Senior Member Join Date: May 2002 Location: NORTHEAST OHIO Posts: 493	Re: Magna Flow Exaust they advertise them as stainless but it can't be too much stainless or a real low grade stainless as a magnet sticks to them pretty good

04-27-2006, 10:05 PM	#18
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Magna Flow Exaust I had magnaflows on my 350 and dumped them for flows they had a wierd dunk dunk dunk noise at certian rpms.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-27-2006, 10:38 PM	#19
epthree04 Registered User Join Date: Apr 2006 Location: Tucson Posts: 86	Re: Magna Flow Exaust yeah magnaflows sound good if there is an xpipe. magnaflows straight through sound like crap imo. thats why im going with flowmaster but if i were doing an xpipe, hpipe, etc i would choose magnaflow for sure!

04-29-2006, 10:39 AM	#20
mplex2000 Registered User Join Date: Jul 2005 Location: DFW Posts: 463	Re: Magna Flow Exaust Looks like I won't be buying that one then. I can do one in all 304 for a little less, including using their x pipe and stainless header reducers. Can't decide if I want to dump in front of axle or get some nice tips and go out in front of the rear wheels.. I've always liked the magnaflow ovals, has anyone used the round ones? Looking at the 6 inch diameter in either 14 or 16 inch length. I want some good noise, but not a rediculous amount..

04-29-2006, 12:50 PM	#21
MACO Registered User Join Date: Sep 2005 Location: British Columbia CANADA Posts: 118	Re: Magna Flow Exaust I have a Magnaflow system on order and it should be here next week. I will be installing it on my truck with a new set of Hooker headers. I am interested to see how it fits and sounds. __________________ 1969 C20 Customer Camper CST, 396, TH400, Factory A/C, Olive Green.

05-01-2006, 08:31 AM	#22
4x4Poet Registered User Join Date: Nov 2004 Location: "Under Montana skies." Posts: 1,836	Re: Magna Flow Exaust You could have the pipes locally ceramic powder coated for ~100. Do it in high luster silver and it will look great, emit less heat, and not rust unless scratched. __________________ '71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup.



Register or Log In To remove these advertisements.

05-17-2006, 04:54 PM	#23
vfx3dartist Registered User Join Date: Nov 2005 Location: San Diego Posts: 22	Re: Magna Flow Exaust Hey Guys - Any updates on the installs? -j

05-19-2006, 05:25 AM	#24
53burb Senior Member Join Date: May 2004 Location: Queen Creek, AZ Posts: 1,010	Re: Magna Flow Exaust Classic Trucks or Custom Classic Trucks has a feature on this exhaust system featured in this months magazine. I will try to get a link later.

05-23-2006, 09:36 PM	#25
vfx3dartist Registered User Join Date: Nov 2005 Location: San Diego Posts: 22	Re: Magna Flow Exaust Found the classic trucks install online...seems pretty cool, but the headers are a bit pricey. I'm sure they are worth it though. http://classictrucks.com/tech/0607cl..._installation/ -j

Register or Log In To remove these advertisements.