WTB - 67-72 Engine Accessories - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Russell · 04-28-2006, 01:13 AM

Hey guys!

I'm needing a few parts for my 80 K25 from one of your body style trucks. What I need is one of those driver's side alternator brackets that bolts to the manifolds / head bolt, the power steering bracketry, short waterpump, and if possible belts.

I don't actually need a power steering pump itself, just the bracketry required to bolt one one, same with the alt, I've got a CS144 to put in, but need the bracketry

Does anyone have something relatively close to Alberta (just north of Montana) relatively cheaply?

Thanks!

Russ

Russell · 04-30-2006, 01:20 AM

Anyone?

krue · 04-30-2006, 04:35 AM

Sorry, I'm no where near you. Why you ditching the serpentine anyways?

Russell · 04-30-2006, 12:52 PM

90% of the reason is becuase I bootyfabbed it a bit, and I'm having second thoughts. The heads on my engine don't have any of the holes required for serp on the pass side, less one. I did drill one hole, but struck my waterjacket in the head, and built a bootyfabbed brace for the bottom hole. Not to mention the fact that I had to put two tensioners on to avoid the belt from striking my throttlebody, lol

Besides, it'd suck to loose all my engine accessories if something happened to the belt...

Russell · 05-03-2006, 05:26 PM

TTT -- still haven't found anything local

*rage'nrat638* · 05-04-2006, 12:15 AM

i got one of these alt brackets 20.00
i have no clue on shipping to canada10.00-15.00?
pm me if you want..mark

Russell · 05-04-2006, 02:54 AM

I've got a potential line on a TPI serp setup (which would eliminate the jerry riggin that was involved, and save me a waterpump swap) but I'll PM you if I wind up still going for the V-belt

04-28-2006, 01:13 AM	#1
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	WTB - 67-72 Engine Accessories Hey guys! I'm needing a few parts for my 80 K25 from one of your body style trucks. What I need is one of those driver's side alternator brackets that bolts to the manifolds / head bolt, the power steering bracketry, short waterpump, and if possible belts. I don't actually need a power steering pump itself, just the bracketry required to bolt one one, same with the alt, I've got a CS144 to put in, but need the bracketry Does anyone have something relatively close to Alberta (just north of Montana) relatively cheaply? Thanks! Russ __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

04-30-2006, 01:20 AM	#2
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: WTB - 67-72 Engine Accessories Anyone? __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

04-30-2006, 04:35 AM	#3
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: WTB - 67-72 Engine Accessories Sorry, I'm no where near you. Why you ditching the serpentine anyways? __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

04-30-2006, 12:52 PM	#4
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: WTB - 67-72 Engine Accessories 90% of the reason is becuase I bootyfabbed it a bit, and I'm having second thoughts. The heads on my engine don't have any of the holes required for serp on the pass side, less one. I did drill one hole, but struck my waterjacket in the head, and built a bootyfabbed brace for the bottom hole. Not to mention the fact that I had to put two tensioners on to avoid the belt from striking my throttlebody, lol Besides, it'd suck to loose all my engine accessories if something happened to the belt... __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

05-03-2006, 05:26 PM	#5
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: WTB - 67-72 Engine Accessories TTT -- still haven't found anything local __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)

05-04-2006, 12:15 AM	#6
rage'nrat638 Account Suspended Join Date: Mar 2003 Location: THE FALL GUY CHICAGO IL Posts: 5,883	Re: WTB - 67-72 Engine Accessories i got one of these alt brackets 20.00 i have no clue on shipping to canada10.00-15.00? pm me if you want..mark Last edited by rage'nrat638; 07-12-2007 at 07:03 AM.

05-04-2006, 02:54 AM	#7
Russell Professional Grade Join Date: May 2003 Location: Fort McMurray, Alberta Posts: 7,915	Re: WTB - 67-72 Engine Accessories I've got a potential line on a TPI serp setup (which would eliminate the jerry riggin that was involved, and save me a waterpump swap) but I'll PM you if I wind up still going for the V-belt __________________ 1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap)



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.