|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
05-07-2006, 11:37 PM
|
#1 |
|
Happy to be here
 
Join Date: Mar 2000
Location: Cypress, TX
Posts: 39,021
|
What did you get done?
This is late again, but I have a really good excuse this time. I was actually doing something truck related. Can you believe that? As usual I did the daily driver clean up on Saturday, then I went by Trailer City and rented a car hauler.
I got up early Sunday morning and drove to Rowlett with the trailer in tow. I wanted to see my buddy Keith and his family because they are in the process of buying a new home. We wanted to see what they bought. WOW! It's really nice! After a tour of Keith's new castle, we went to Stoked Out Specialties in Rockwall. I got a quick look at the finished door panels for Roger's soon to be released truck project. They turned out really, really nice. After a quick look around I rolled my 77 Cheyenne out and loaded it on the trailer. It was time to take it home finally. There are a couple of details to get squared away on the transmission before I can really call it done, but at least it's in my garage again. What did you get done?
__________________
Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra" |
|
|
|
05-07-2006, 11:41 PM
|
#2 |
|
needin' money
Join Date: May 2005
Location: Chickasha, Oklahoma
Posts: 1,106
|
Re: What did you get done?
basically nothin, i will reply again later
__________________
SWB Stands for Short Wide Bed |
|
|
|
|
05-08-2006, 12:07 AM
|
#3 |
|
No No
Join Date: Jun 2005
Location: Pueblo Colorado
Posts: 1,781
|
Re: What did you get done?
Did some yard work and cleaned the house a bit. I did get enough energy to pull my dash off this afternoon and replace my ac panel with the non ac panel I got from the donor truck. Seems pointless since I'm going to do an AC conversion in the near future but looks good for now.
Glad you got the truck back Ken! We need some more pics! 
__________________
1976 Custom Deluxe SWB Med FMB.3/4 Drop. Gen VI 454, Muncie HD 3 speed With Modified OE Hurst Shifter, 3.73 12 bolt, GMPP HO roller cam, Hooker headers, Performer intake with modified Q-jet, Accel distributor. Best 1/4 12.3 @108. Funnest run 19.84 @88 full 1/4 mile burn out. 1997 K1500 ext cab 5.7 stock except muffler Last edited by SSC's76; 05-08-2006 at 12:08 AM. |
|
|
|
|
05-08-2006, 01:22 AM
|
#4 |
|
its just $$$$$
Join Date: Jul 2003
Location: OK
Posts: 2,078
|
Re: What did you get done?
I FINALLY!! got my drivers side floor pan, inner rocker, and A-pillar bottom welded in. Now I just need to hang the door on so i can weld in the rocker.
Then its time to pull the body off of the frame so it can go to the powder coater. |
|
|
|
|
05-08-2006, 04:03 PM
|
#5 | |
|
Account Suspended
Join Date: Sep 2005
Location: Monroe, WA
Posts: 3,814
|
Re: What did you get done?
Quote:
 Well, not really - but let's see 'em! :-D |
|
|
|
|
|
05-09-2006, 07:36 AM
|
#6 | |
|
its just $$$$$
Join Date: Jul 2003
Location: OK
Posts: 2,078
|
Re: What did you get done?
Quote:
|
|
|
|
|
|
05-08-2006, 01:28 AM
|
#7 |
|
OutOfMyMind & I'llNeverKnowWhy
Join Date: Apr 2004
Location: Another world, some other time
Posts: 672
|
Re: What did you get done?
I put in a Stewart hi flow waterpump, new radiator hoses, a 94 amp alt, new belts and pulleys.
__________________
-Justin-Out of my mind and I'll never know why 1976 Chevrolet Silverado C10 350 4bbl / TH350 Big10 longbed 1986 Pontiac Firebird T-Top 5.0L TPI 700R4 WS6 1992 Pontiac Firebird T-Top 5.0L TBI 700R4 My cardomain page  I don't like to save, it's more fun to spend!! |
|
|
|
|
05-08-2006, 01:47 AM
|
#8 |
|
Professional Grade
Join Date: May 2003
Location: Fort McMurray, Alberta
Posts: 7,915
|
Re: What did you get done?
Got my 80 running pretty good, and started on pulling the engine out of my 89.
If I were to get my new injectors, shocks, do my rear end electrical, and bolt the box down, I'd almost be tempted to get her registered and insured so I can start driving it, and getting it tuned up  However, I want to get my 89 done and sold, 77 done and ready to sell, and 80 in primer before I do so. So, it won't see the road till the middle of June or so.
__________________
1995 Chevrolet 2 Door Tahoe (6.6L LBZ Duramax / ZF6 / NP241 with 1 ton solid axle swap) |
|
|
|
|
05-08-2006, 01:53 AM
|
#9 |
|
Right turn Clyde
Join Date: Nov 2002
Location: Cincinnati, Ohio
Posts: 2,911
|
Re: What did you get done?
Replaced the spider gears in my 87. That thing is turning into more and more trouble. Now if I could get it to idle in gear and not die that would be awesome. I'm such a neewb to TBI and all its complicated mess of sensors.
__________________
1974 C25 LWB: 454 4bbl Carb / TH400 / 3.73 1992 Camaro RS 305 TBI |
|
|
|
|
05-08-2006, 05:24 AM
|
#10 |
|
KEEP ON TRUCKIN'
 
Join Date: Jun 2005
Location: Sterling, Va.
Posts: 5,730
|
Re: What did you get done?
I had to take the day off and drive this fine machine to a car show for a friend of mine. What a fun car!
__________________
JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10  Father/Son Projecthttp://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER" 
|
|
|
|
|
05-08-2006, 08:11 AM
|
#11 |
|
Registered User
Join Date: Mar 2003
Location: Liège , Belgium
Posts: 263
|
Re: What did you get done?
Hi all ,
I did nothing truck related , as usual  My beloved and myself did hit the road with the G-20 & went for a week to the mediterranean sea area , we were housed for free by a friend ... We spent the whole week visiting the surrounding area , I worked on the body of a 1938 Citroën "Traction Avant" which had her roof damaged , I had to put the rain gutter right and work out some dents here & there --> I was paid with a BBQ and a lot of red wine hereby in the after ground a picture of that Citroën , with me at the steering wheel of a 1961 F*rd T-Bird ...  I also had the opportunity to test drive a 1966 M*stang convertible , 289ci/C4 combo , common stuff for you all , but something different for us european guys  http://www.forum-dreams-cars.net/ind...=post&id=10122 That's all , folks The Baron
__________________
1982 Suburban 2WD , 260ci Olds engine,TH400 , will get a 1979 front clip , might be ready in ... 2016 1985 Chevy Van ( 305/350 ) , "Kellogg" equipped , my actual D.D. 1960 Girl Friend , frame still good , body has some dents Last edited by the baron; 05-08-2006 at 08:13 AM. |
|
|
|
|
05-08-2006, 10:18 AM
|
#12 |
|
Insert Witty Text Here
Join Date: Oct 2002
Location: San Antonio, TX
Posts: 3,415
|
Re: What did you get done?
I installed a Jet Performance stock rebuilt Quadrajet on the truck. I have not had a chance to do any adjustments yet, but it seems to run pretty well with it.
Slonaker |
|
|
|
|
05-08-2006, 10:44 AM
|
#13 |
|
Registered User
Join Date: Oct 2002
Location: Edmond, OK
Posts: 5,904
|
Re: What did you get done?
Played Army, organized parts/tools truck as well as wired it for a radio which i have to mount in the box sometime in the next month. We did alot of packing getting ready for our 2 week annual training in Arkansas..
__________________
Jon 1982 Chevy Silverado 350/th350.... RETIRED 1993 Jeep XJ 2 door(Cherokee) 4wd 4.0ltr/AX-15 (5spd)/NP231 .... Oklahoma Roll Call |
|
|
|
|
05-08-2006, 11:26 AM
|
#14 |
|
What Hump?
Join Date: Apr 2003
Location: New River AZ
Posts: 2,009
|
Re: What did you get done?
Had the vent window replaced after my stereo was stolen then washed, waxed and buffed the 86 and did the brakes on my sub.
__________________
Lil red 86 c-10 99 Sub 78 Camper Special w/ 454 |
|
|
|
|
05-08-2006, 01:12 PM
|
#15 |
|
Registered User
Join Date: Mar 2005
Location: 10-Uh-See
Posts: 5,609
|
Re: What did you get done?
Went to the Chevy/GMC Nats in Maggie Valley Saturday. Went to Dollywood Sunday.
__________________
|
|
|
|
|
05-08-2006, 01:50 PM
|
#16 |
|
Magnificent bastard
Join Date: Oct 2004
Location: Glendale, AZ
Posts: 196
|
Re: What did you get done?
Had to replace a leaking radiator hose, while I was in there I finally put on my new radiator shroud (old one destroyed by flying fan blade).
Went to replace my bent front bumper with a shiny new one and discovered the frame horn on the bent side was tweaked by about 3/4". Where the outer bumper bracket attaches to the frame was also pushed in a little. Need to get it straightened before I can install the new bumper, considering trying this myself...
__________________
1977 Big Block Burb |
|
|
|
|
05-08-2006, 02:52 PM
|
#17 |
|
www.73-87chevytrucks.com
 
Join Date: Dec 1999
Location: Birmingham, AL
Posts: 6,935
|
Re: What did you get done?
Also went to Maggie Valley this past weekend. Got nothing truck related done, but I did drive my '87 up there. over 500 miles and the truck averaged 21.8mpg's driving 65mph. I was impressed..
__________________
Chris Lucas 1973 Chevy C-10 1978 GMC Jimmy (2WD) - SOLD 1987 R10 twin turbo LS 1991 R3500 SRW CrewCab 1985 K5 diesel swapped project 1989 K5 2WD conversion w/ Vette susp Project Captkaos Customs 73-87chevytrucks.com |
|
|
|
|
05-08-2006, 03:35 PM
|
#18 |
|
Registered User
Join Date: Apr 2005
Location: Tulsa Oklahoma
Posts: 943
|
Re: What did you get done?
nothing truck related at all and am getting the itch to do something but the damn money isnt available right now so hung out in the house with the wife and son took a nap on the couch with the littlwe one sat. and sunday after watching horspower and all the other car stuff on spike and then took another nap it was great but today at work really sucks b\c i want a nap
__________________
square body trucks an addiction or an investment either way they consume all my extra time and money |
|
|
|
|
05-08-2006, 04:00 PM
|
#19 |
|
Account Suspended
Join Date: Sep 2005
Location: Monroe, WA
Posts: 3,814
|
Re: What did you get done?
My ribs are still healing up from my kid accidently wacking me with a 4x6x8.
I did get my Pertronix Ignitor installed. Not sure there's enough there for a FAQ; pretty simple install and absolutely trouble-free. Goodbye points! Question - do you guys solder connections like that? I've always done it, but my buddy saw me doing it and thought I was crazy...? I also sawsall'd off the exhaust in my '69 vette and got the right half-shaft out. I also dropped the spare so I've got some room to work. I may drop the tank this weekend to see if I've actually got the build sheet. I've got one stubborn bolt on the R/F lower A-arm that I'm fighting with. Gonna try the torch-and-beeswax thing this weekend, but I'm open for any other approaches. |
|
|
|
|
05-08-2006, 04:09 PM
|
#20 | |
|
KEEP ON TRUCKIN'
Join Date: Jun 2005
Location: Sterling, Va.
Posts: 5,730
|
Re: What did you get done?
Quote:
__________________
JIM '97 GMC Sierra K1500 '95 Chevy Silverado C1500 '71 Cheyenne Z71 / LT1 & 4-Speed SWB K/10 Father/Son Projecthttp://www.youtube.com/watch?v=4l689JKXPnA http://67-72chevytrucks.com/vboard/payments.php "LIVIN' FREE FOREVER"
|
|
|
|
|
|
05-08-2006, 07:06 PM
|
#21 |
|
Trucker.
Join Date: Nov 2002
Location: Fort Worth, TX
Posts: 1,364
|
Re: What did you get done?
I did nothing truck related, I was busy doing crap around the house.
Friday after work I had to come home and cut down a 25' tall Red Bud tree that had split down the middle from storms last week. It over hangs our house so I had to get up on the roof and use the pole saw to cut most of the top out. Saturday I spent the better part of the day replacing the P Trap on my bathroom sink, It had rotted out and was leaking. While under there I noticed that the supply lines to the faucet were leaking. They were copper hard line and the houses foundation has settled causing them to leak. While I was at it I also replaced the hardline on the toilet supply line that had also been leaking. I also snaked the bathroom sink pipes as well because we've had a hellacious clog the last two weeks. Clear now and I got a nice pipe snake for $14 from the Depot. Would have been the same price to rent but this house is old and I figured I'll need it again later. Sunday we went out on the in-laws new pontoon boat on Lake Granbury. It's real nice, came with a clarion radio setup and all the bells/whistles. One problem was the prop button on the throttle wouldn't lower but would lift. It lowered manually at the motor so it's got to be in the handle. |
|
|
|
|
05-09-2006, 12:26 AM
|
#22 |
|
I'm back with 2nd truck!
Join Date: Feb 2002
Location: Texas
Posts: 3,774
|
Re: What did you get done?
Worked most of it but went to my cousin's wedding reception and had way too much to drink. GF had to drive the truck home
 for the 2nd time ever. She did great but was not used to the throttle being so touchy. Other than that it rained too much to do anything else so I worked on another cousin's kitchen remodeling project. New counters, sink, faucet, etc. Turned out better than they thought it would. I gotta start charging for my labor 
__________________
1979 Chevrolet Bonanza Big10 "Tootsie Roll" 1985 Chevrolet Silverado (wife's) Member of the Southern Bowties Club "Don't underestimate how sexy a fat man who drinks to excess can be." Homer Simpson |
|
|
|
|
05-09-2006, 03:37 PM
|
#23 |
|
Senior Member
Join Date: Feb 2003
Location: Wichita KS
Posts: 610
|
Re: What did you get done?
I've been a slave to my fiance for the past TWO weekends! lol
We just bought a house and we've spent countless hours doing minor remodeling work inside of it... I also got most of my caprice wagon put back together after it's new paint job, but it's not quite done yet. Nothing truck related except for getting a few mandrel bent tubes for my turbo hotside tubing.
__________________
~Steve~
Friesen High Performance Auto and Graphics Toy: 87 Shortwide, 406 smallblock with a little boost My 87 buildup Daily Driver: 99 Sierra SLE 4X4. Black on Black and harder than hell to keep clean.  |
|
|
|
|
05-10-2006, 02:53 PM
|
#24 |
|
Registered User
Join Date: Jan 2005
Location: beaumont,tx
Posts: 757
|
Re: What did you get done?
i went to meltdown in new bransfuels this weekend had fun while i was away my dad finished up the framing of out 30x50 shop that were buildin. i was impressed with my new truck after doin a tune up on it it get 23mpg with 17s and low pros but im gettin a programmer to fix the speedo and see what i can get
__________________
http://img.photobucket.com/albums/v5...ropped/sig.jpg |
|
|
|
|
05-10-2006, 04:27 PM
|
#25 |
|
Registered loser
Join Date: Oct 2005
Location: Williston ND
Posts: 289
|
Re: What did you get done?
I spent the last couple of days getting this to run again. I still have a ways to go. But its a fun little Bike.
__________________
-Nate- There is no replacement for displacement  1996 Buick Riviera 3.8L S/C V6- DD 1973 Chevrolet Cheyenne Super C/10 LWB 454/TH350 |
|
|
|
|
| Bookmarks |
|
|
)
Hybrid Mode
