![]() |
Register or Log In To remove these advertisements. |
|
|
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Registered User
Join Date: Jun 2004
Location: Beeville, Texas
Posts: 1,943
|
Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
Here's the story. A couple months ago I found this old 1970 yellow and white Chevy K20 Suburban at the junkyard. It was all original except the 350 had been replaced by a 454! I bought the seat(black vinyl), dash pad(also black), and fan shroud out of it, and I came back for some other stuff a week later and it was gone. Somebody bought it and it sat about 20 miles out of town on some guys land. What happened was, this guy let his friend that bought it keep his trucks on his property and he left 'em there way too long. So what happened? The property owner got tired of 'em being there and called the same junkyard the burb came from to pick it up.
![]() ![]() ![]() ![]() ![]() ![]() ![]()
__________________
RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck Last edited by Robert1970C20rstbukt; 05-13-2006 at 08:09 PM. |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2002
Location: hamilton,ohio,usa
Posts: 1,499
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
Cool, will go good with your other '70!!!!!
|
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Mar 2001
Location: RADFORD, VA
Posts: 2,651
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
cool cain't wait to see pixs,my 70 K/10 also has the red lockouts.
__________________
1964 BBC 402 4x4 ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: Aug 2005
Location: Hillsboro Oregon
Posts: 6,449
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
What a deal!!!
|
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: Nov 2004
Location: "Under Montana skies."
Posts: 1,836
|
Sounds like a runner. The tranny and xfer case probably leak, but only need an oil change. Unlikely that they'll prove problematic to get the truck back on the road. The interior parts and body are another matter.
I sure hope that 454 runs. That would be sweet. Drain the block and flush the block from the thermostat neck through the block drains before running it, though. Just spray garden hose thru while blocking the water pump intake. New thermostat, too. Probably needs a new water pump. Maybe have the radiator cleaned by a rad shop. Only $36 here if no repair needed. They use an acid tank with ultrasound waves to loosen any crud in the tubes. Much better than just flushing. Make sure the tank has good fuel. Rust and congealed gas will clog a carb fast. Best to drain it and have it also cleaned by a rad shop. Perhaps, sealed, too. Then get to the brake hydraulics. Who knows what you'll find there, too. Safety first. ![]() Looking foward to pics.
__________________
'71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup. |
![]() |
![]() |
![]() |
#6 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
Great advise from 4x4poet.You`ll also need a black dashpad,seat,and fan shroud.
![]()
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Jun 2004
Location: Beeville, Texas
Posts: 1,943
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
Thanks for the tips guys. I'm gonna put the seat and dashpad back in it when we get it home.
![]() ![]()
__________________
RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck Last edited by Robert1970C20rstbukt; 05-14-2006 at 12:27 PM. |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: Mar 2001
Location: RADFORD, VA
Posts: 2,651
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
pixs,pixs,we need pixs man the suspence is killing me.
__________________
1964 BBC 402 4x4 ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#9 |
Registered User
Join Date: Jun 2004
Location: Beeville, Texas
Posts: 1,943
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
I won't have 'em till Saturday, try not to think about it too much.
![]()
__________________
RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck |
![]() |
![]() |
![]() |
#10 | |
Registered User
Join Date: Nov 2004
Location: "Under Montana skies."
Posts: 1,836
|
Quote:
![]()
__________________
'71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup. |
|
![]() |
![]() |
![]() |
#11 |
Special Order
![]() ![]() Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,851
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
Can you at least draw a picture
![]()
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ |
![]() |
![]() |
![]() |
#12 |
Out draggin'
Join Date: Jan 2004
Location: Pitman,NJ
Posts: 1,574
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
lol!Draw a pic!
![]() Good find... How rusty is it???
__________________
91 GMC Xcab LB-Bags/bd/caddy clip SOLD 72 C10 Cheyenne Super LWB SOLD 92 GMC K1500 Burb 72 C10 Burb (ex. Cheesewagon)SOLD 72 C20 Burb parts truck 71 C10 Burb "project" |
![]() |
![]() |
![]() |
#13 |
Aluminum slot wheels rule...
Join Date: Jan 2006
Location: Maine
Posts: 6,211
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
If they are cool looking slot wheels, they should be aluminum. Sounds like a sweet deal. Is it already street legal, or is it going to need alotta work?
|
![]() |
![]() |
![]() |
#14 |
Registered User
Join Date: Jun 2004
Location: Beeville, Texas
Posts: 1,943
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
My handwritin ain't too good, so a drawin picture is out of the question. I'll take the camera and see if he's open tomorrow.
bagged91, it's not in good shape in the roof areas, but it's fixable and is in way better condition than the cab on my truck. Overall the body is in good condition with the exception of the roof. Jake, I know they were slot wheels, but they were rusty and had been painted white. Sounds weird but that's what me and Dad saw. They are 16.5" wheels that are 8.25" wide and they have 8.75-16.5 tires that are at about 30% tread and holding air. There was another one in the spare tire holder in the back that had a big blowout in the tire, so there's a complete set of 5 wheels. I'm keeping those wheels on there since they look cool and I don't have any spare 8 lug wheels or tires. I'll paint 'em silver when I can get around to it. This Burb is gonna be a whole new project. Full brake system needs to be gone through, fluids changed, cooling system flushed, probably 2 hours worth of cleaning the interior out, etc. I sure as hell hope that big block runs good!!!! ![]() ![]()
__________________
RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck |
![]() |
![]() |
![]() |
#15 |
Aluminum slot wheels rule...
Join Date: Jan 2006
Location: Maine
Posts: 6,211
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
Tell ya what, since I'm a nice generous kind of guy, I'll buy the 'Burb off from you for $301, therefore you will be making profit. Not only that, I'll let YOU ship it up here to Maine, in to my driveway, at no cost to me. Sound good?
|
![]() |
![]() |
![]() |
#16 |
Registered User
Join Date: Jun 2004
Location: Beeville, Texas
Posts: 1,943
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
Hell no!
![]() ![]()
__________________
RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck |
![]() |
![]() |
![]() |
#17 |
Aluminum slot wheels rule...
Join Date: Jan 2006
Location: Maine
Posts: 6,211
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
Have fun, and get the pics ASAP.
|
![]() |
![]() |
![]() |
#18 |
Registered User
Join Date: Jun 2004
Location: Beeville, Texas
Posts: 1,943
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
I knew some crap like this was gonna happen............Yesterday morning I went and checked it out again, yes it has the original front axle and the 205 T-case. I would've bought it last week but Mom wouldn't let Dad buy it for me. Well the guy at the yard said someone wants the steering column and steering box. I was pissed, and I didn't have enough $$$ and still don't. Damnit I hope nothing's missing off of it..............Will post back ASAP when I find anything out.............
__________________
RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck |
![]() |
![]() |
![]() |
#19 |
Aluminum slot wheels rule...
Join Date: Jan 2006
Location: Maine
Posts: 6,211
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
Damn that sucks. Hope its in one piece when you get it.
|
![]() |
![]() |
![]() |
#20 |
Registered User
Join Date: Nov 2004
Location: "Under Montana skies."
Posts: 1,836
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
Uh oh. Mom ain't keen on the obsession.
![]()
__________________
'71 GMC K20 Suburban, '71 GMC K10 Suburban, '72 Chevy C10 CST Suburban, '72 Chevy K20 clunker pickup. |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: Jun 2004
Location: Beeville, Texas
Posts: 1,943
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
Well the guy never came to get the parts!!!! YES!!!!
![]()
__________________
RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck |
![]() |
![]() |
![]() |
#22 |
Aluminum slot wheels rule...
Join Date: Jan 2006
Location: Maine
Posts: 6,211
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
Well thats good. Congrats.
![]() |
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Jun 2004
Location: Beeville, Texas
Posts: 1,943
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
Thanks dude. I can't wait to hear that BB rumble, it already has a dual exhaust with long glasspacks that's still in good condition.
![]()
__________________
RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck |
![]() |
![]() |
![]() |
#24 |
Registered User
Join Date: Mar 2001
Location: RADFORD, VA
Posts: 2,651
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
Whew that was close,now go get that sucker so we can see it.
__________________
1964 BBC 402 4x4 ![]() ![]() ![]() ![]() |
![]() |
![]() |
![]() |
#25 |
Registered User
Join Date: Jun 2004
Location: Beeville, Texas
Posts: 1,943
|
Re: Getting a 1970 K/20 Burb!!!!!!!!!!!!!!
I'll take pics if the yard is open late, he usually closes at lunch time and I get out of school at 3:37. Our last day of school is thursday so it'll be friday at the latest!!!!! Class of '06 rules!!!!!!
![]()
__________________
RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck Last edited by Robert1970C20rstbukt; 05-22-2006 at 09:29 PM. |
![]() |
![]() |
![]() |
Bookmarks |
|
|