Our 69 C10-pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tink · 07-31-2002, 09:38 PM

Finally got a few pics... We got her for free about 2 months ago from my brother. She doesn't run cause my nephew switched the battery cables, fried the wiring and then cut it all out.

She needs a ton of work, but has been a fun project for us!

How we brought her home:

The interior:

The 350:

We've done some work on both the interior and the engine since these were taken. I'll post some updated ones later.

Super Chevy · 07-31-2002, 09:49 PM

Actually looks like a good solid project. Sure is more rustfree then mine cab wise. Hope you have fun building it and make sure to take lots of pictures

jay-dawg · 07-31-2002, 09:54 PM

Hi Tink,

Nice to finally see your truck. Looks like a solid start.

jay

Denny · 07-31-2002, 10:09 PM

Good to see she found a good home

Nice truck Tink

**68SWB4x4** · 07-31-2002, 10:24 PM

sounds like a real smart nephew

but maybe it was for the better, sense now you have the truck and its in better hands, painless wiring kits arnt very expensive anyway

nroden · 07-31-2002, 10:27 PM

Looks like its good enough to be fun to fix without going through to much trouble... and for free. Isn't much any of us could say about that.

Tink · 08-01-2002, 04:16 PM

Quote:

Originally posted by 68SWB4x4
sounds like a real smart nephew but maybe it was for the better, sense now you have the truck and its in better hands, painless wiring kits arnt very expensive anyway

Yup, the 18-Volt painless wiring kit should be arriving tomorrow!

Smooth68 · 08-01-2002, 04:32 PM

Quote:

Originally posted by Tink

Yup, the 18-Volt painless wiring kit should be arriving tomorrow!

18 VOLT??? Those are gonna be some bright lights!

Tink · 08-01-2002, 04:35 PM

Quote:

Originally posted by ProSt68Trk

18 VOLT??? Those are gonna be some bright lights!

Oops!

I meant 18 Circuit! Damn, I need to stop working so hard.

Smooth68 · 08-01-2002, 04:38 PM

Just giving ya a hard time

- - truck looks pretty nice. Looks like the motor is all original...a plus! At least you know there's not been a bunch of monkeys in there changing and adding parts.

Tink · 08-01-2002, 04:42 PM

Quote:

Originally posted by ProSt68Trk
Just giving ya a hard time - - truck looks pretty nice. Looks like the motor is all original...a plus! At least you know there's not been a bunch of monkeys in there changing and adding parts.

Thanks. The motor was been rebuilt a few years ago. The only 'monkeys' in there changing and adding parts now is us!

Here's what we've done so far:

Smooth68 · 08-01-2002, 04:48 PM

Cool! I perfer to the the "Monkey" when it comes to my own stuff - looks like your making some nice progress.

pickupman · 08-01-2002, 05:28 PM

Looks like a good project, and can't beat the price. Have fun and enjoy it. Bill

07-31-2002, 09:38 PM	#1
Tink Registered User Join Date: May 2002 Location: VA Posts: 1,337	Our 69 C10-pics Finally got a few pics... We got her for free about 2 months ago from my brother. She doesn't run cause my nephew switched the battery cables, fried the wiring and then cut it all out. She needs a ton of work, but has been a fun project for us! How we brought her home: The interior: The 350: We've done some work on both the interior and the engine since these were taken. I'll post some updated ones later. __________________ 69 Chevy C10 88 Sierra 02 2500 Suburban And too many S10s to list!

07-31-2002, 09:54 PM	#3
jay-dawg chevelito Join Date: Jun 2001 Location: Honolulu, HI USA Posts: 1,609	Hi Tink, Nice to finally see your truck. Looks like a solid start. jay __________________ New deadline...when my son can drive. Aloha from Honolulu, HI

07-31-2002, 10:09 PM	#4
Denny Registered User Join Date: Jul 2002 Location: Cedar Hill, MO Posts: 426	Good to see she found a good home Nice truck Tink __________________ 1969 Chevy C10. Dakota Digital Gauges, 383 Votex Engine, MSD 8361 Distributor, MSD 6A Unit, Demon Carb, Phoenix Transmission 4L80E trans, 3:73 Posi Rear End Early Classics 6 Lug Disc Brakes and Spindles All Stainless Lines

07-31-2002, 10:24 PM	#5
68SWB4x4 Strongman Garage Join Date: Apr 2000 Location: Salinas, CA Posts: 10,241	sounds like a real smart nephew but maybe it was for the better, sense now you have the truck and its in better hands, painless wiring kits arnt very expensive anyway __________________ Kalle 68 GMC Suburban 1500 4x4 SOLD 69 Pontiac Lemans 99 Silverado 4.8 5 speed ECSB [ Facebook Instagram Subscribe on YOUTUBE

07-31-2002, 10:27 PM	#6
nroden Registered User Join Date: Jun 2001 Location: Springfield, MO Posts: 1,098	Looks like its good enough to be fun to fix without going through to much trouble... and for free. Isn't much any of us could say about that. __________________ Nick Rodenberg 72 Cheyenne 10 V8 350/TH350 white/ochre/white/ochre, ochre/saddle interior Retired and in the dry... still runs. I now drive Red '01 Ford Focus... better MPG!!!

07-31-2002, 09:49 PM	#2
Super Chevy Registered User Join Date: Feb 2001 Location: Ohio Posts: 1,025	Actually looks like a good solid project. Sure is more rustfree then mine cab wise. Hope you have fun building it and make sure to take lots of pictures

08-01-2002, 04:38 PM	#10
Smooth68 Registered User Join Date: Aug 2001 Location: West Fork, Arkansas - Razorback Country Posts: 1,826	Just giving ya a hard time - - truck looks pretty nice. Looks like the motor is all original...a plus! At least you know there's not been a bunch of monkeys in there changing and adding parts. __________________ Smooth68's Web Site WTB 64-66 project or frame/cab, SWB or LWB...I have the fever! Whatcha got?? '68 Short Step - Shaved Body, Soon Bagged - *SOLD* Driver-2004 GMC Z-71 Ext-cab

08-01-2002, 04:48 PM	#12
Smooth68 Registered User Join Date: Aug 2001 Location: West Fork, Arkansas - Razorback Country Posts: 1,826	Cool! I perfer to the the "Monkey" when it comes to my own stuff - looks like your making some nice progress. __________________ Smooth68's Web Site WTB 64-66 project or frame/cab, SWB or LWB...I have the fever! Whatcha got?? '68 Short Step - Shaved Body, Soon Bagged - *SOLD* Driver-2004 GMC Z-71 Ext-cab

08-01-2002, 05:28 PM	#13
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Looks like a good project, and can't beat the price. Have fun and enjoy it. Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.