swb wide bed driver shape f/s $400.00 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

billsbowtie · 05-22-2006, 11:32 PM

i got this bed off of another board member. but now i have found one a little better and want to try and get my money back out of this one. i have what i gave for the bed plus gas going after it and primer and stuff to work on it .and about 2 days of my time. it would be a good driver bed with a little more work to the pass. side. the floor is good with only a few small rust holes. cross members are good it does have some surface rust as you can see in the pics.[SALE PENDING]

billsbowtie · 05-22-2006, 11:32 PM

billsbowtie · 05-22-2006, 11:35 PM

it does have some bondo in a big dent on the pass. side where i have been working on it but the dent was not deep . you can't see it from the inner side.

billsbowtie · 05-22-2006, 11:35 PM

billsbowtie · 05-22-2006, 11:35 PM

billsbowtie · 05-22-2006, 11:36 PM

rugger · 05-23-2006, 02:02 AM

Put me first in line for purchase. I will PM you

**special-K** · 05-23-2006, 07:15 AM

Hmmm....#2 in line.

mbgmike · 05-23-2006, 07:22 AM

We might be interested if #1 or #2 don't get it

billsbowtie · 05-23-2006, 10:28 PM

rugger is thinking it over.

billsbowtie · 05-23-2006, 10:58 PM

rugger has pasted on it . special-k its your turn.

**special-K** · 05-24-2006, 07:58 AM

Thanks Bill,I`ll let Mike take a shot.I don`t want to tie it up,kinda busy here.

billsbowtie · 05-24-2006, 09:51 AM

mbgmike what do you think.

byrd · 05-24-2006, 07:11 PM

Bill,
if mbgmike doesn't want it I may be interested. I would like to see better pics of the floor and any rust issuses that need attention.

billsbowtie · 05-24-2006, 09:51 PM

byrd the pass. bed side needs the most attention it is the worst place on the bed. i will try to get better pics. bill

byrd · 05-24-2006, 09:55 PM

thanks

big daddys · 05-25-2006, 01:05 AM

any way to ship to ca. maybe break it down and pallet it ?

billsbowtie · 05-25-2006, 03:54 PM

rust

billsbowtie · 05-25-2006, 03:54 PM

billsbowtie · 05-25-2006, 03:54 PM

billsbowtie · 05-25-2006, 03:58 PM

the bed is upside down and hard to get pics. of floor.
big daddys i dont have any way of doing that.
byrd i hope these last pics. help.

billsbowtie · 05-25-2006, 10:16 PM

byrd mbgmike has not contacted me one way or the other so it's your turn.

byrd · 05-25-2006, 10:29 PM

Thanks bill, but I'm kinda lazy, I'm looking for something that would need less work. I will mention it to the guy who will helping me with the body work on my truck as he has been looking for a short bed, just don't know if he has the cash or wants it, so meantime sell if you can but I will get him over to check the pics over(he is not computer literate and doesn't want to be) Randy

billsbowtie · 05-25-2006, 10:44 PM

ok randy

05-22-2006, 11:35 PM	#3
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed driver shape f/s $400.00 it does have some bondo in a big dent on the pass. side where i have been working on it but the dent was not deep . you can't see it from the inner side.

05-22-2006, 11:35 PM	#4
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed driver shape f/s $400.00

05-22-2006, 11:35 PM	#5
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed driver shape f/s $400.00

05-22-2006, 11:36 PM	#6
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed driver shape f/s $400.00

05-23-2006, 02:02 AM	#7
rugger Registered User Join Date: Feb 2004 Location: vancouver, BC Posts: 26	Re: swb wide bed driver shape f/s $400.00 Put me first in line for purchase. I will PM you

05-22-2006, 11:32 PM	#1
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	swb wide bed driver shape f/s $400.00 i got this bed off of another board member. but now i have found one a little better and want to try and get my money back out of this one. i have what i gave for the bed plus gas going after it and primer and stuff to work on it .and about 2 days of my time. it would be a good driver bed with a little more work to the pass. side. the floor is good with only a few small rust holes. cross members are good it does have some surface rust as you can see in the pics.[SALE PENDING] Last edited by billsbowtie; 05-25-2006 at 11:16 PM.

05-23-2006, 07:15 AM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: swb wide bed driver shape f/s $400.00 Hmmm....#2 in line. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-23-2006, 07:22 AM	#9
mbgmike Registered User Join Date: Aug 2005 Location: Pasadena,Tx /Pto Pta DR Posts: 5,415	Re: swb wide bed driver shape f/s $400.00 We might be interested if #1 or #2 don't get it

05-23-2006, 10:28 PM	#10
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed driver shape f/s $400.00 rugger is thinking it over.

05-23-2006, 10:58 PM	#11
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed driver shape f/s $400.00 rugger has pasted on it . special-k its your turn.

05-24-2006, 07:58 AM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,852	Re: swb wide bed driver shape f/s $400.00 Thanks Bill,I`ll let Mike take a shot.I don`t want to tie it up,kinda busy here. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-24-2006, 09:51 AM	#13
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed driver shape f/s $400.00 mbgmike what do you think.

05-24-2006, 09:51 PM	#15
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed driver shape f/s $400.00 byrd the pass. bed side needs the most attention it is the worst place on the bed. i will try to get better pics. bill

05-25-2006, 01:05 AM	#17
big daddys New Member Join Date: Apr 2006 Location: california Posts: 17	Re: swb wide bed driver shape f/s $400.00 any way to ship to ca. maybe break it down and pallet it ?

05-25-2006, 03:54 PM	#18
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed driver shape f/s $400.00 rust



Register or Log In To remove these advertisements.

05-25-2006, 03:58 PM	#21
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed driver shape f/s $400.00 the bed is upside down and hard to get pics. of floor. big daddys i dont have any way of doing that. byrd i hope these last pics. help.

05-25-2006, 10:16 PM	#22
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed driver shape f/s $400.00 byrd mbgmike has not contacted me one way or the other so it's your turn.

05-25-2006, 10:44 PM	#24
billsbowtie Senior Member Join Date: Feb 2003 Location: rose hill V.A. 24281 Posts: 17,997	Re: swb wide bed driver shape f/s $400.00 ok randy

Register or Log In To remove these advertisements.