update on parting 72 cst blazer - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**68350** · 05-24-2006, 10:16 PM

Still parting a 72 cst blazer. things not available are the frame, motor, tranny, t-case, buckets, console, front end including grille, both bumpers, and tank. the carpet strips and tire carrier are gone, also. very good windshield frame, no rust, for $300. e-mail me with other requests, but a few I should mention are the hatch is broken and the body has some rust as does the doors. thanks

donkey69 · 05-24-2006, 11:57 PM

So Whats Left???????(besides windshield frame!!)

**68350** · 05-25-2006, 12:02 AM

everything except whats listed

**burb71** · 05-26-2006, 05:59 PM

How about the under floor supports for the bucket seats?
How much?

**68350** · 05-28-2006, 12:02 AM

the under floor brackets are gone, sorry

**68350** · 05-28-2006, 04:19 PM

as far as some parts that are left, here's a short list:
back seat w/ ashtrays
2 extra ashtrays
set of blue seat belts, which includes three for the back seat(center is still there)
rear panels
the trim that the rear panels fit into, chrome fancy ones as it is a cst
windshield frame-rust free
tub(tailgate and top pending)

just let me know what is needed

ClassicJimmy · 05-29-2006, 12:42 PM

Condition & cost of the back seat? Will you ship & do you have pics? Thanks!

**68350** · 05-29-2006, 01:34 PM

I am not sure about shipping. It is a big piece. As far as condition, it is in very nice shape. Ashtrays are in good condition, too. I will check around on shipping for ya. Make an offer, and I will get you some pics later. thanks

Chevyman63 · 05-29-2006, 01:36 PM

How do the rocker boxes and floor look? Any pics of these areas available?
Thanks.

tom71 · 05-29-2006, 02:37 PM

interested in the bed floor pm me tom

**68350** · 05-29-2006, 04:33 PM

rockers, behind doors, kick panel/floor area in front is all rusted out. the better part of the front floors, around the hump, where seats mount is all good as well as the bed floor and wheel wells. thanks

bpmcgee · 08-14-2006, 10:06 AM

Is the rear seat still available?

Brian

meathead95 · 08-14-2006, 02:37 PM

i could use some patches out of the rear floor. are you willing to cut out some for me?

**68350** · 08-14-2006, 06:42 PM

rear seat is gone now, meathead, let me know what areas you need cut out. thanks

thekidd · 08-14-2006, 07:01 PM

Hey me again.How are the rear panels? And how much do you want for them? I guess you could have shipped me the whaole thing if I keep on bothering you.Thanks.

**68350** · 08-14-2006, 08:19 PM

rear panels are shot, however the 6 mounting pads are there and in good condition if anyone's interested. thanks

**D.PASSMORE** · 08-14-2006, 09:04 PM

How much for the rear mounting pads/ shipped?

**68350** · 08-14-2006, 11:02 PM

60 shipped?

blazerboy72 · 08-15-2006, 05:13 AM

How is the rear of the floor at the tailgate? I need the rear cross sill and about a foot forward from there of the floor. Would that be to big to ship?

meathead95 · 08-15-2006, 07:51 AM

i need from the rear of the floor all the way forward to the rear corner of the wheel tubs

**68350** · 08-15-2006, 11:41 AM

sorry blazerboy, meathead has first dibs. let me check it out for rust, thanks

blazerboy72 · 08-15-2006, 04:33 PM

ok let me know if he doesnt want it.

72addict · 08-16-2006, 01:37 AM

any pics of the windshield frame?

Chevyman63 · 08-16-2006, 06:10 AM

If they're still available, how do the rear wheel houses look? Any rust?
Thanks.

**68350** · 08-16-2006, 10:28 AM

72addict, I already sold the w/s frame

chevyman63, I will take a look at the rear tubs and get back to you

05-24-2006, 10:16 PM	#1
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	update on parting 72 cst blazer Still parting a 72 cst blazer. things not available are the frame, motor, tranny, t-case, buckets, console, front end including grille, both bumpers, and tank. the carpet strips and tire carrier are gone, also. very good windshield frame, no rust, for $300. e-mail me with other requests, but a few I should mention are the hatch is broken and the body has some rust as does the doors. thanks __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

05-24-2006, 11:57 PM	#2
donkey69 JB-80 &quot;Twice as Good&quot; Join Date: Jun 2004 Location: Central, MN Posts: 354	Re: update on parting 72 cst blazer So Whats Left???????(besides windshield frame!!) __________________ HEY NOW!

05-25-2006, 12:02 AM	#3
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: update on parting 72 cst blazer everything except whats listed __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

05-26-2006, 05:59 PM	#4
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: update on parting 72 cst blazer How about the under floor supports for the bucket seats? How much?

05-28-2006, 12:02 AM	#5
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: update on parting 72 cst blazer the under floor brackets are gone, sorry __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

05-28-2006, 04:19 PM	#6
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: update on parting 72 cst blazer as far as some parts that are left, here's a short list: back seat w/ ashtrays 2 extra ashtrays set of blue seat belts, which includes three for the back seat(center is still there) rear panels the trim that the rear panels fit into, chrome fancy ones as it is a cst windshield frame-rust free tub(tailgate and top pending) just let me know what is needed __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

05-29-2006, 12:42 PM	#7
ClassicJimmy FNG to resto/mod world! Join Date: Nov 2005 Location: Spokane, Wa Posts: 196	Re: update on parting 72 cst blazer Condition & cost of the back seat? Will you ship & do you have pics? Thanks! __________________ 71 GMC Jimmy - under construction 75 GMC K25 Sierra Grande - under deconstruction 92 Chevy K2500 ECSB - sold 04 Nissan Titan ECSB Off Road - sold & missed 13 Ford F-150 Ecoboost (work truck) - sold 16 Ford F-150 Ecoboost (work truck)

05-29-2006, 01:34 PM	#8
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: update on parting 72 cst blazer I am not sure about shipping. It is a big piece. As far as condition, it is in very nice shape. Ashtrays are in good condition, too. I will check around on shipping for ya. Make an offer, and I will get you some pics later. thanks __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

05-29-2006, 01:36 PM	#9
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: update on parting 72 cst blazer How do the rocker boxes and floor look? Any pics of these areas available? Thanks.

05-29-2006, 02:37 PM	#10
tom71 what happened to flint mi Join Date: Oct 2005 Location: san diego Posts: 437	Re: update on parting 72 cst blazer interested in the bed floor pm me tom __________________ 71 swb 2wd fleet frame off in progress 72 4x4 blazer daily driver 70 olds cutlass s mint condition owned by a grandma 56 gmc 2wd project waitng 97 fiance mobile

05-29-2006, 04:33 PM	#11
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: update on parting 72 cst blazer rockers, behind doors, kick panel/floor area in front is all rusted out. the better part of the front floors, around the hump, where seats mount is all good as well as the bed floor and wheel wells. thanks __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

08-14-2006, 10:06 AM	#12
bpmcgee Registered User Join Date: Mar 2003 Location: Northern Illinois Posts: 2,181	Re: update on parting 72 cst blazer Is the rear seat still available? Brian

08-14-2006, 02:37 PM	#13
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: update on parting 72 cst blazer i could use some patches out of the rear floor. are you willing to cut out some for me? __________________ 72 2wd blazer 72 swb 4x4

08-14-2006, 06:42 PM	#14
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: update on parting 72 cst blazer rear seat is gone now, meathead, let me know what areas you need cut out. thanks __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

08-14-2006, 07:01 PM	#15
thekidd Registered User Join Date: Oct 2004 Location: Piedmont of North Carolina Posts: 196	Re: update on parting 72 cst blazer Hey me again.How are the rear panels? And how much do you want for them? I guess you could have shipped me the whaole thing if I keep on bothering you.Thanks. __________________ thekidd 95 Silverado 2000 Suburban 4x4 91 Nissan 4x4 65 Impala SS (Mom and Dads now mine) 1971 K5 Blazer(Father and son project) 1972 2WD Blazer



Register or Log In To remove these advertisements.

08-14-2006, 08:19 PM	#16
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: update on parting 72 cst blazer rear panels are shot, however the 6 mounting pads are there and in good condition if anyone's interested. thanks __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

08-14-2006, 09:04 PM	#17
D.PASSMORE One of the First Join Date: Jan 2000 Location: St. Augustine,FL. Posts: 4,055	Re: update on parting 72 cst blazer How much for the rear mounting pads/ shipped? __________________ DAVID PASSMORE ST AUGUSTINE ,FL ZIP 32084 '71 SWB K/10 CUSTOM DELUXE (Chili) '72 BLAZER K/5 Muscle Truck (Mule) '72 LWB K/20 CHEYENNE (Blackie)

08-14-2006, 11:02 PM	#18
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: update on parting 72 cst blazer 60 shipped? __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

08-15-2006, 05:13 AM	#19
blazerboy72 Senior Member Join Date: Mar 2002 Location: Temple, Ga Posts: 854	Re: update on parting 72 cst blazer How is the rear of the floor at the tailgate? I need the rear cross sill and about a foot forward from there of the floor. Would that be to big to ship?

08-15-2006, 07:51 AM	#20
meathead95 computer illiterate Join Date: Jan 2001 Location: Des Moines, IA Posts: 6,446	Re: update on parting 72 cst blazer i need from the rear of the floor all the way forward to the rear corner of the wheel tubs __________________ 72 2wd blazer 72 swb 4x4 Last edited by meathead95; 08-15-2006 at 07:53 AM.

08-15-2006, 11:41 AM	#21
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: update on parting 72 cst blazer sorry blazerboy, meathead has first dibs. let me check it out for rust, thanks __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

08-15-2006, 04:33 PM	#22
blazerboy72 Senior Member Join Date: Mar 2002 Location: Temple, Ga Posts: 854	Re: update on parting 72 cst blazer ok let me know if he doesnt want it.

08-16-2006, 01:37 AM	#23
72addict Registered User Join Date: Mar 2000 Location: Mason MI, 48854 (strikezone of the mitten) Posts: 894	Re: update on parting 72 cst blazer any pics of the windshield frame? __________________ 1957 Cameo

08-16-2006, 06:10 AM	#24
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: update on parting 72 cst blazer If they're still available, how do the rear wheel houses look? Any rust? Thanks. __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

08-16-2006, 10:28 AM	#25
68350 Senior Member Join Date: Jan 2002 Location: Williston, ND Posts: 2,999	Re: update on parting 72 cst blazer 72addict, I already sold the w/s frame chevyman63, I will take a look at the rear tubs and get back to you __________________ 68 Chevy CST/10, 50th Anniversary, 327/th400, 373 posi, buckets 68 GMC Shortbox Stepside, 402/th400, Tilt, Tach, Bucket Seats, 3.08 Positraction 69 Chevy Camaro SS, 383, 4 speed, positraction 70 Chevy El Camino SS396, Triple Black, 454/th400, Tach 70 Chevy Shortbox Stepside 4x4, 350/th350, Tilt, Tach, Cab Lights, Bumper Guards, Tow Hooks 70 Chevy 3/4 Longbox, 350/auto, 70k, SURVIVOR 71 Chevy Blazer, CST, 350/auto 71 GMC Sierra K2500, 454, 4 speed, 4.10 posi, 37s 71 Custom/30, Open Road, 350/th400, tilt 72 Chevy Shortbox Fleetside, 496 Stroker/th400, Tilt, Tach, Bucket Seats, 3.42 Posi 72 GMC Sierra Grande 2500. 427/th400, tilt, a/c, tool and stowage, buckets/console, 3.54 posi

Register or Log In To remove these advertisements.