|
|
|
05-29-2006, 08:10 PM
|
#1 |
|
Registered User
Join Date: Feb 2005
Location: Harrison TN
Posts: 183
|
Van tilt
I picked up a van tilt today, it has no neutral safety switch. Can I buy a new one or should I try to get a truck tilt safety switch if I can find one?? If so where can I buy one? Thanks
|
|
|
|
05-29-2006, 08:24 PM
|
#2 |
|
Senior Member
Join Date: Jul 2001
Location: Muskegon,MI,USA
Posts: 6,026
|
Re: Van tilt
I prefer to use the truck neutral safety switch as the existing harness plugs will connect to the switch. (B/U lights and starter).
Either way the switch has to be relocated as it will not fit the truck in the Van location. Any board vendors will probably have the truck switch in stock and most auto parts stores have them available also. Jim |
|
|
|
|
05-29-2006, 08:27 PM
|
#3 |
|
Registered User
Join Date: Feb 2005
Location: Harrison TN
Posts: 183
|
Re: Van tilt
I have it ready to cut. Thought I should check first. I will call around for a switch. Thanks Much..
|
|
|
|
|
05-29-2006, 08:45 PM
|
#4 |
|
Senior Member
 Join Date: Aug 2003
Location: Conyers,Ga.
Posts: 7,288
|
Re: Van tilt
If the van still has the transmission, it may be on it.
|
|
|
|
|
05-29-2006, 11:32 PM
|
#5 |
|
Registered User
Join Date: May 2000
Location: Storm Lake, Ia
Posts: 1,449
|
Re: Van tilt
Keep in mind that not all neutral saftey switches are the same and the one that will go on the van column needs the fullsize tab that will go into the slot you cut probably 1/4" wide or so. Some are designed to saddle a real small upturned tab inside that is part of the tube
__________________
|
|
|
|
|
05-29-2006, 08:27 PM
|
#6 |
|
its all about the +6 inches
Join Date: Jan 2001
Location: Hilliard Ohio
Posts: 2,690
|
Re: Van tilt
Take the one off your non tilt column
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
