FS: 1970 Chevy cab, bed floor, front clip - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Werewolf · 06-12-2006, 02:12 AM

Like it says. Rockers are shot. Cab corners are actually okay. Floorboards need work, too. No rust above the windshield. Big dent in the right cab corner, runs entire length of the corner. It has been drilled into and pulled to a point. Non AC cab. Overall the cab can be fixed and used, but it'd take work. Steering column goes with, as does the shot bench seat and gas tank. I get the gages, glove compartment stuff, both doors, hinges, and any other odds and ends I feel like taking.

Front end: Radiator support rough. Both front ends of the fenders have been cut out. Ready for patching? Some rot at the backs of the fenders. Hood is shot, grille is shot.

Bed floor: Steel. A few pinholes, but solid overall. Wheel wells are good. Bed front is good. Comes with a cheap roll bar. No bed sides; somebody took them off this truck. Floor, inner wells, and bed front only.

I bought this truck for the good running 454 in it. I promised the rest of the drivetrain (73 or later) to somebody else.

I don't know what the truck is worth in scrap, but if somebody here can come take all this stuff off the truck themselves, they can have it for $50 or best offer. It won't be hard to talk me down, especially if you've got some parts for a '68 CST that I might be able to use.

Pictures follow! If you want better pics, I've got the same photos in extremely high quality. PM me and I can e-mail them.

Werewolf · 06-12-2006, 02:14 AM

More pics. Killed the quality on the first one too much, so here's that again, too:

Werewolf · 06-12-2006, 02:15 AM

Couple more.

qksilver · 06-12-2006, 09:01 PM

I am not far, could get rid of it for you. Really only interested in the frame and bed floor.
I will pm you

Werewolf · 06-18-2006, 02:50 PM

ttt

If the rest of the scrap is bothering anybody, leave it. I still think the cab is worth something. I can sell it with both doors, as seen in my other ad, $75 for the works. Or $25 for the cab. Yes, it would take work, but it's still very fixable.

I'm also open to selling random parts at this point.

muddyole 69 · 06-19-2006, 02:00 AM

Is the frame a 70 model or 73/later like the drive train ? If it is not spoken for by anyone please let me know Mike

Werewolf · 06-19-2006, 05:01 PM

It's 73 and up, and promised to somebody else. Kinda starting to wish I hadn't decided to give it away. :P But yeah, the truck is, like, welded onto the frame.

06-12-2006, 02:12 AM	#1
Werewolf Woof? Join Date: Jun 2005 Location: Raleigh, NC Posts: 276	FS: 1970 Chevy cab, bed floor, front clip Like it says. Rockers are shot. Cab corners are actually okay. Floorboards need work, too. No rust above the windshield. Big dent in the right cab corner, runs entire length of the corner. It has been drilled into and pulled to a point. Non AC cab. Overall the cab can be fixed and used, but it'd take work. Steering column goes with, as does the shot bench seat and gas tank. I get the gages, glove compartment stuff, both doors, hinges, and any other odds and ends I feel like taking. Front end: Radiator support rough. Both front ends of the fenders have been cut out. Ready for patching? Some rot at the backs of the fenders. Hood is shot, grille is shot. Bed floor: Steel. A few pinholes, but solid overall. Wheel wells are good. Bed front is good. Comes with a cheap roll bar. No bed sides; somebody took them off this truck. Floor, inner wells, and bed front only. I bought this truck for the good running 454 in it. I promised the rest of the drivetrain (73 or later) to somebody else. I don't know what the truck is worth in scrap, but if somebody here can come take all this stuff off the truck themselves, they can have it for $50 or best offer. It won't be hard to talk me down, especially if you've got some parts for a '68 CST that I might be able to use. Pictures follow! If you want better pics, I've got the same photos in extremely high quality. PM me and I can e-mail them. Attached Images __________________ 1968 LWB CST BB 2004 Avalanche Z71 LT3. 2003 S-10 ZR2 (hers). 1997 Astro 1992 Caprice wagon, 500k stock miles. Nursing wounds after a bad wreck. 1997 Saturn - need gas mileage from something!

06-12-2006, 02:14 AM	#2
Werewolf Woof? Join Date: Jun 2005 Location: Raleigh, NC Posts: 276	Re: FS: 1970 Chevy cab, bed floor, front clip More pics. Killed the quality on the first one too much, so here's that again, too: Attached Images __________________ 1968 LWB CST BB 2004 Avalanche Z71 LT3. 2003 S-10 ZR2 (hers). 1997 Astro 1992 Caprice wagon, 500k stock miles. Nursing wounds after a bad wreck. 1997 Saturn - need gas mileage from something!

06-12-2006, 02:15 AM	#3
Werewolf Woof? Join Date: Jun 2005 Location: Raleigh, NC Posts: 276	Re: FS: 1970 Chevy cab, bed floor, front clip Couple more. Attached Images __________________ 1968 LWB CST BB 2004 Avalanche Z71 LT3. 2003 S-10 ZR2 (hers). 1997 Astro 1992 Caprice wagon, 500k stock miles. Nursing wounds after a bad wreck. 1997 Saturn - need gas mileage from something!

06-12-2006, 09:01 PM	#4
qksilver Senior Member Join Date: Dec 2004 Location: Southern Pines NC Posts: 3,853	Re: FS: 1970 Chevy cab, bed floor, front clip I am not far, could get rid of it for you. Really only interested in the frame and bed floor. I will pm you

06-18-2006, 02:50 PM	#5
Werewolf Woof? Join Date: Jun 2005 Location: Raleigh, NC Posts: 276	Re: FS: 1970 Chevy cab, bed floor, front clip ttt If the rest of the scrap is bothering anybody, leave it. I still think the cab is worth something. I can sell it with both doors, as seen in my other ad, $75 for the works. Or $25 for the cab. Yes, it would take work, but it's still very fixable. I'm also open to selling random parts at this point. __________________ 1968 LWB CST BB 2004 Avalanche Z71 LT3. 2003 S-10 ZR2 (hers). 1997 Astro 1992 Caprice wagon, 500k stock miles. Nursing wounds after a bad wreck. 1997 Saturn - need gas mileage from something!

06-19-2006, 02:00 AM	#6
muddyole 69 Senior Member Join Date: Jan 2004 Location: SE Ohio Posts: 1,121	Re: FS: 1970 Chevy cab, bed floor, front clip Is the frame a 70 model or 73/later like the drive train ? If it is not spoken for by anyone please let me know Mike __________________ hav'n fun be'n me

06-19-2006, 05:01 PM	#7
Werewolf Woof? Join Date: Jun 2005 Location: Raleigh, NC Posts: 276	Re: FS: 1970 Chevy cab, bed floor, front clip It's 73 and up, and promised to somebody else. Kinda starting to wish I hadn't decided to give it away. :P But yeah, the truck is, like, welded onto the frame. __________________ 1968 LWB CST BB 2004 Avalanche Z71 LT3. 2003 S-10 ZR2 (hers). 1997 Astro 1992 Caprice wagon, 500k stock miles. Nursing wounds after a bad wreck. 1997 Saturn - need gas mileage from something!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.